How to remove the water pump on Ford Bronco?

First of all, the cooling system has to be drained, and several components such as air cleaner assembly, fan or fan clutch assembly, drive belt, and water pump pulley need to be removed. In the case of fuel-injected models, the cooling system should be drained and then release the fan or fan clutch assembly, release the drive belt, and remove brackets and accessories that hold onto the water pump bolts. Also, disconnect hoses, remove bolts, and take out the water pump for replacement. During installation apply RTV sealant to new gaskets carefully positioning them and tightening bolts.

What are the indications that a water pump needs replacement on Ford Bronco?

A water pump that needs replacement shows signs through noise and leakage. Visually check for leakage around the front pump seal and drain hole. Check the front bearing for roughness or looseness by removing the drive belt and testing for movement. Check the sealing surfaces for signs of leakage. If any of these signs are present, replace the water pump.

Genuine Ford Bronco Water Pump

H2O Pump

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

6 Water Pumps found

View related parts
Ford Bronco Pump Assembly - Water
Part Number: F3TZ-8501-C
- Other Name: Pump Assy - Water; Washer Pump, Water Pump, Water Pump Assembly
- Manufacturer Note: #F5TE 8505-C4A (number off casting for identification)) - includes (1) E9TZ 8507 A gasket
- Replaces: F3TZ-8501-D, FOTZ-8501-E
$75.24 MSRP: $124.36
You Save: $49.12 (40%)

Add to Cart
More Info
Fits the following Vehicles:
1990-1996 Ford Bronco | 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 4AT A4LD, 4AT AOD, 4AT E4OD, 4MT, 5MT
Less Info
View related parts
Ford Bronco Pump Assembly - Water
Part Number: FOTZ-8501-E
- Other Name: Water Pump
- Manufacturer Note: Incl. (1) E9TZ 8507-A gasket - (8/94)
- Replaced by: F3TZ-8501-C
$75.24 MSRP: $124.36
You Save: $49.12 (40%)

Add to Cart
More Info
Fits the following Vehicles:
1990-1992 Ford Bronco | 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 4AT AOD, 4AT E4OD, 4MT, 5MT
Less Info
View related parts
Ford Bronco Pump Assembly - Water
Part Number: E9PZ-8501-D
- Other Name: Pump Assy - Water
$64.13 MSRP: $106.00
You Save: $41.87 (40%)

Add to Cart
More Info
Fits the following Vehicles:
1980-1982 Ford Bronco | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 4MT
Less Info
View related parts
Ford Bronco Pump Assembly Water
Part Number: D6AZ8501A
- Other Name: Pump Assy - Water; Water Pump, Water Pump Assembly
More Info
Fits the following Vehicles:
1980-1982 Ford Bronco | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 4MT
Less Info
View related parts
Ford Bronco Pump Assembly - Water
Part Number: D6ZZ-8501-B
- Other Name: Pump Assy - Water; Washer Pump, Water Pump, Water Pump Assembly
More Info
Fits the following Vehicles:
1980-1987 Ford Bronco | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 4AT AOD, 4MT
Less Info
View related parts
Ford Bronco Pump Assembly Water
Part Number: F5TZ8501H2A
- Other Name: Pump Assy - Water
More Info
Fits the following Vehicles:
1995-1996 Ford Bronco | 8 Cyl 5.0L | 4AT A4LD, 4AT E4OD, 5MT
Less Info

Ford Bronco Water Pump Parts Questions & Answers

Pump Assembly - Water
F3TZ-8501-C
Q: How to remove the water pump on Ford Bronco?
A: First of all, the cooling system has to be drained, and several components such as air cleaner assembly, fan or Fan Clutch assembly, drive belt, and water pump pulley need to be removed. In the case of fuel-injected models, the cooling system should be drained and then release the fan or fan clutch assembly, release the drive belt, and remove brackets and accessories that hold onto the water pump bolts. Also, disconnect hoses, remove bolts, and take out the water pump for replacement. During installation apply RTV sealant to new gaskets carefully positioning them and tightening bolts.
Pump Assembly - Water
F3TZ-8501-C
Q: What are the indications that a water pump needs replacement on Ford Bronco?
A: A water pump that needs replacement shows signs through noise and leakage. Visually check for leakage around the front pump seal and drain hole. Check the front bearing for roughness or looseness by removing the drive belt and testing for movement. Check the sealing surfaces for signs of leakage. If any of these signs are present, replace the water pump.