How to remove, install and adjust the accelerator cable on Ford Crown Victoria?

To remove the air intake duct, disconnect the accelerator cable from the throttle lever and the cruise control cable from the cable bracket. To remove it from the accelerator pedal recess, separate the accelerator cable from the cable bracket. You can detach the accelerator cable clips from the intake manifold and valve cover and take out the cable through firewall. Reverse removal steps for installation while ensuring proper cable routing. Apply sealant if necessary to prevent water entry. Measure freeplay at the accelerator pedal (3/64 to 1/8-inch) to adjust. Loosen the locknut on the cable bracket and adjust deflection within the specified range.

Genuine Ford Crown Victoria Accelerator Cable

Choke Cable

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

5 Accelerator Cables found

View related parts
Ford Crown Victoria Throttle Control Cable Assembly
Part Number: 4W7Z-9A758-AA
- Other Name: Cable Assy - Throttle Control; Throttle Cable
$0.00
More Info
Fits the following Vehicles:
2004-2006 Ford Crown Victoria | 8 Cyl 4.6L | 4AT, 4AT 4R70W, 4AT 4R75W
Less Info
View related parts
Ford Crown Victoria Throttle Control Cable Assembly
Part Number: 1W7Z-9A758-AA
- Other Name: Cable Assy - Throttle Control
- Manufacturer Note: NGV
More Info
Fits the following Vehicles:
2001-2006 Ford Crown Victoria | 8 Cyl 4.6L | 4AT, 4AT 4R70W, 4AT 4R75W
Less Info
View related parts
Ford Crown Victoria Throttle Control Cable Assembly
Part Number: 3W7Z-9A758-AA
- Other Name: Cable Assembly - Throttle Control
More Info
Fits the following Vehicles:
2003 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W
Less Info
View related parts
Ford Crown Victoria CABLE ASY - THROTTLE
Part Number: F2VY9A758A
- Other Name: Throttle Cable
More Info
Fits the following Vehicles:
1993-1994 Ford Crown Victoria | 8 Cyl 4.6L | 4AT AOD-E
Less Info
View related parts
Ford Crown Victoria Cable Assembly Throttle Con
Part Number: F6AZ9A758AB
- Other Name: Cable Assy - Throttle Control; Throttle Cable
More Info
Fits the following Vehicles:
1996-1997 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W
Less Info

Ford Crown Victoria Accelerator Cable Parts Questions & Answers

Throttle Control Cable Assembly
3W7Z-9A758-AA
Q: How to remove, install and adjust the accelerator cable on Ford Crown Victoria?
A: To remove the air intake duct, disconnect the accelerator cable from the throttle lever and the cruise control cable from the cable bracket. To remove it from the accelerator pedal recess, separate the accelerator cable from the cable bracket. You can detach the accelerator cable clips from the Intake Manifold and valve cover and take out the cable through firewall. Reverse removal steps for installation while ensuring proper cable routing. Apply sealant if necessary to prevent water entry. Measure freeplay at the accelerator pedal (3/64 to 1/8-inch) to adjust. Loosen the locknut on the cable bracket and adjust deflection within the specified range.