How to remove and replace the brake pedal and bushings on Ford F-250 with a manual transmission or automatic transmission?

The retaining clip is removed and the shaft is slid to the right to remove the brake pedal and pedal bushings and the master cylinder pushrod and brake switch assembly are disconnected. If the bushings are worn, they should be replaced before installing the pedal and pushrod using the reverse of the removal procedure.

Genuine Ford F-250 Brake Pedal

Brake Pedal Pad

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

3 Brake Pedals found

View related parts
Ford F-250 Pedal Assembly - Brake
Part Number: F3TZ-2455-A
- Other Name: Pedal Assy - Brake
$161.88 MSRP: $236.67
You Save: $74.79 (32%)

Add to Cart
More Info
Fits the following Vehicles:
1992-1997 Ford F-250 | 6 Cyl 4.9L, 8 Cyl 4.6L, 8 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L, 8 Cyl 7.3L, 8 Cyl 7.5L | 3AT C6, 4AT 4R70W, 4AT AOD, 4AT E4OD, 4MT, 5MT
Less Info
View related parts
Ford F-250 Pedal Assembly Brake
Part Number: E4TZ2455B
- Other Name: Pedal Assy - Brake
More Info
Fits the following Vehicles:
1984-1991 Ford F-250 | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L, 8 Cyl 6.9L, 8 Cyl 7.3L, 8 Cyl 7.5L | 3AT C6, 3MT, 4AT AOD, 4AT E4OD, 4MT, 5MT
Less Info
View related parts
Ford F-250 Pedal Assembly - Brake
Part Number: F75Z-2455-GA
- Other Name: Pedal Assy - Brake; Pedal Assembly
More Info
Fits the following Vehicles:
1997-1999 Ford F-250 | 8 Cyl 4.6L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L | 4AT 4R100, 4AT 4R70W, 4AT E4OD, 5MT
Less Info

Ford F-250 Brake Pedal Parts Questions & Answers

Pedal Assembly - Brake
F3TZ-2455-A
Q: How to remove and replace the brake pedal and bushings on Ford F-250 with a manual transmission or automatic transmission?
A: The retaining clip is removed and the shaft is slid to the right to remove the brake pedal and pedal bushings and the master cylinder pushrod and brake switch assembly are disconnected. If the bushings are worn, they should be replaced before installing the pedal and pushrod using the reverse of the removal procedure.