×
- Live Chat
- 1-888-788-9341
My Garage
My Account
Cart
Genuine Ford Explorer Trailer Towing
- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
19 Genuine Ford Explorer Trailer Towings found
Ford Explorer Trailer Towing - 4 Pin ConnectorPart Number: BB5Z-15A416-A$52.85 MSRP: $75.00You Save: $22.15 (30%)Product Specifications- Other Name: Kit - Tow Bar Electrics; Wire Harness
- 4 Pin Connector
Fits the following Ford Models
- 2011-2019 Ford Explorer
- This 4-pin wiring harness assembly is made to plug into the factory electrical system.
- The 4-pin design does not allow the use of trailers with electric brakes.
- Dealer installation recommended.
Product Specifications- Other Name: Kit - Tow Bar Electrics; Wire Harness
- Replaces: 7T4Z-15A416-B, DT4Z-15A416-A
- 4 Pin
Fits the following Ford Models
- 2020-2023 Ford Explorer
- Note: Not For Use With SportEdge: Not For Use With Edge Sport or Hands Free Tailgate.
- The 4-pin wiring harness assembly splices/connects to the factory electrical system.
Ford Explorer Trailer Hitch - Class IPart Number: BB5Z-19D520-AA$270.87 MSRP: $355.00You Save: $84.13 (24%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Kit - Tow Bracket
Fits the following Ford Models
- 2011-2015 Ford Explorer
- Original equipment hitch bolts directly into existing holes – no drilling or welding required.
- NOTE: Towing capacity could be limited by vehicle powertrain.
- See your dealer or Owners Guide for details.
Ford Explorer Trailer HitchPart Number: GB5Z-19D520-A$296.63 MSRP: $375.00You Save: $78.37 (21%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Kit - Tow Bracket
- Replaced by: GB5Z-19D520-C
Fits the following Ford Models
- 2016-2017 Ford Explorer
- For use with unique rear fascia from Ford Accessories.
- Trailer hitch drawbar, ball and wiring harness sold separately.
- Towing capacity is dependent on vehicle powertrain
- Module required if vehicle is equipped with Hands-Free Foot Activate Liftgate.(1
- Take your adventure quotient to the next level: Equip your Explorer with this rugged receiver that bolts directly to the rear frame and provides the capability to tow a boat, camper or trailer.
- Constructed of tubular steel crossmembers and high-strength steel brackets.
- Finished with a durable E-coat and black powder topcoat for maximum corrosion resistance.
- Dimensions – approximately 17.5" long, 51.1" wide, 10.0" high.
- Includes hitch, plus mounting hardware.
- Dealer installation recommended.
Ford Explorer Trailer Towing - 2 1/4 Inch Rise x 4 Inch Drop x 1 Inch Dia. HolePart Number: BL3Z-19A282-A$39.80Product Specifications- Other Name: Kit - Tow Bracket; Bracket, Mount, Mount Arm, Mount Kit, Receiver
- Replaces: F5TZ-19A282-A, F5TZ-19A282-C
- 2 1/4 Inch Rise x 4 Inch Drop x 1 Inch Dia. Hole
Fits the following Ford Models
- 2007-2023 Ford Explorer
- Vehicle powertrain, suspension and other equipment all contribute to towing capacity. Please check your vehicle Owner’s Manual for details.
- This ball mount fits 2” square receivers and is rated for up to 6,000 lb. GTW/600 lb. TW.
- Solid 2” shank, 9” length with 2-1/4” rise, 4” drop
- 1” diameter ball hole • 6,000 lb. capacity
- Corrosion-resistant black powdercoat finish
Ford Explorer Trailer Towing - 3.5KPart Number: BL8Z-19A282-A$23.94 MSRP: $30.00You Save: $6.06 (21%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Kit - Tow Bracket; Hitch Plate, Receiver
- Replaces: 1L2Z-19A282-AA
- 3.5K
Fits the following Ford Models
- 2008-2010 Ford Explorer
- For Vehicles with 1 1/4 Inch Receiver Hitch.
- Class II 1 1/4 Inch 7 3/16 Inch long 2 5/8 Inch Rise 3 1/4 Drop 1 Inch Hole
Ford Explorer Trailer Towing - Stainless Steel, 2" Ball, 1" ShankPart Number: BL3Z-19F503-B$18.84 MSRP: $35.00You Save: $16.16 (47%)Product Specifications- Other Name: Kit - Tow Bracket
- Replaces: F5TZ-19F503-E
- Stainless Steel, 2" Ball, 1" Shank
Fits the following Ford Models
- 2007-2023 Ford Explorer
- Vehicle powertrain, suspension and other equipment all contribute to towing capacity. Please check your vehicle Owner’s Manual for details.
- This heavy-duty hitch ball is for towing applications up to 6,000 lbs. GTWR
- 2” ball, 1” shank diameter, 2-1/8” shank length
- Features forged stainless-steel one-piece construction for maximum strength and corrosion resistance
- 6,000 lb. capacity
Ford Explorer Trailer Towing - Stainless Steel, 1 7/8 Ball, 1 Inch ShankPart Number: BL3Z-19F503-C$19.22 MSRP: $30.00You Save: $10.78 (36%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Kit - Tow Bracket; Ball Stud, Bracket Ball Stud, Hitch Ball
- Stainless Steel, 1 7/8 Ball, 1 Inch Shank
Fits the following Ford Models
- 2007-2023 Ford Explorer
- Vehicle powertrain, suspension and other equipment all contribute to towing capacity. Please check your vehicle Owner’s Manual for details.Ranger: Not Compatible With Light Duty Trailer Hitch
- This light-duty hitch ball is for towing applications up to 2,000 lbs.GTWR
- 1-7/8” ball, 1” shank diameter, 2-1/8” shank length
- Features forged stainless-steel one-piece construction for maximum strength and corrosion resistance
- 2,000 lb. capacity
Fits the following Ford Models
- 2020-2023 Ford Explorer
- The CURT™ D-ring shackle mount is perfect for vehicle recovery or tough jobs off-road and out in the field. It is built with a removable, heavy-duty D-ring shackle, a solid steel shank and a highly durable powder coat finish.
- Fits trailer hitches with a 2" x 2" receiver tube opening
- Can be used with most vehicle recovery straps
- Shank constructed from solid steel for optimum strength
- Protected by a highly durable carbide powder coat finish
Product Specifications- Other Name: Kit - Tow Bracket
- Replaces: GB5Z-19D520-B, GB5Z-19D520-A
Fits the following Ford Models
- 2017 Ford Explorer
- Module Replacement Required if vehicle is equipped with Hands-Free Foot Activated Liftgate.
- Take your adventure quotient to the next level: Equip your Explorer with this rugged receiver that bolts directly to the rear frame and provides the capability to tow a boat, camper or trailer.
- Constructed of tubular steel crossmembers and high-strength steel brackets.
- Finished with a durable E-coat and black powder topcoat for maximum corrosion resistance.
- Dimensions – approximately 17.5" long, 51.1" wide, 10.0" high.
- Includes hitch, bezel and mounting hardware.
- Dealer installation recommended.
Ford Explorer Trailer Towing - 2 Inch DropPart Number: BL3Z-19A282-B$28.67 MSRP: $35.00You Save: $6.33 (19%)Product Specifications- Other Name: Kit - Tow Bracket
- Replaces: F5TZ-19A282-D, F5TZ-19A282-B
- 2 Inch Drop
Fits the following Ford Models
- 2007-2023 Ford Explorer
- Vehicle powertrain, suspension and other equipment all contribute to towing capacity. Please check your vehicle Owner’s Manual for details.
- This ball mount fits 2” square receivers and is rated for up to 6,000 lb. GTW/600 lb. TW.
- Solid 2” shank, 8-1/2” length with 3/4” rise, 2” drop
- 1” diameter ball hole
- 6,000 lb. capacity
- Corrosion-resistant black powdercoat finish
Product Specifications- Other Name: Cover
Fits the following Ford Models
- 2016-2017 Ford Explorer
- For vehicles without Class II or Class III Trailer Tow Packages.
- Recommended when installing a Ford accessory trailer hitch.
- Subtly distinguish the back of your Explorer with this pre-painted lower fascia section that is expertly engineered to accommodate the Ford Accessories trailer hitch for additional versatility.
- For use when adding a Ford accessory trailer hitch to your Explorer, expertly engineered to conceal the Ford Accessories trailer hitch for a clean finished appearance.
- Constructed of reinforced, injection-molded, thermoformed plastic for strength and structural rigidity.
- Finished with a durable Sterling Silver clearcoat.
- Includes lower fascia, hitch cover, installation sheet and mounting hardware.
- Dealer installation recommended.
Product Specifications- Other Name: Kit - Trailer Hitch Bar; Trailer Hitch
Fits the following Ford Models
- 2018-2019 Ford Explorer
- Module Replacement Required if vehicle is equipped with Hands-Free Foot Activated Liftgate.Towing capacity could be limited by vehicle powertrain. See your dealer or Owners Guide for details..
- Take your adventure quotient to the next level: Equip your Explorer with this rugged receiver that bolts directly to the rear frame and provides the capability to tow a boat, camper or trailer.
- Constructed of tubular steel crossmembers and high-strength steel brackets.
- Finished with a durable E-coat and black powder topcoat for maximum corrosion resistance.
- Dimensions – approximately 17.5" long, 51.1" wide, 10.0" high.
- Includes hitch, bezel and mounting hardware.
- Dealer installation recommended.
Product Specifications- Other Name: Kit
Fits the following Ford Models
- 2007-2010 Ford Explorer
- Not available for AWD vehicles.
- Use this rugged kit to tow your Explorer or Sport Trac behind your motorhome. It's designed to keep all four wheels on the ground for greater stability.
- Available for 2001-2005 Explorer 4.6L V8, 2001-2010 Explorer 4.0L V6or 2007-2010 Explorer Sport Trac 4.0L V6, 4WD and an automatic transmission.
- Dealer installation recommended.
Product Specifications- Other Name: Kit
Fits the following Ford Models
- 2007-2010 Ford Explorer
- Not available for AWD vehicles.
- Use this rugged kit to tow your SUV behind your motorhome. It's designed to keep all 4 wheels on the ground for greater stability.
- Available for 2006-2010 Explorer 4.6L V8 or 2007-2010 Sport Trac 4.6LV* equipped with 4WD and automatic transmission
- Dealer installation is recommended
Product Specifications- Other Name: Cover
Fits the following Ford Models
- 2017 Ford Explorer
- Subtly distinguish the back of your Explorer with this pre-painted lower fascia section that is expertly engineered to accommodate the Ford Accessories trailer hitch for additional versatility.
- For use when adding a Ford accessory trailer hitch to your Explorer, expertly engineered to conceal the Ford Accessories trailer hitch for a clean finished appearance.
- Constructed of reinforced, injection-molded, thermoformed plastic for strength and structural rigidity.
- Finished with a durable Sterling Silver clearcoat.
- Includes lower fascia, hitch cover, installation sheet and mounting hardware.
- Dealer installation recommended.
Product Specifications- Other Name: Cover
Fits the following Ford Models
- 2016-2017 Ford Explorer
- Recommended when installing a Ford accessory trailer hitch.
- For vehicles without Class II or Class III Trailer Tow Packages. .
- Subtly distinguish the back of your Explorer with this pre-painted lower fascia section that's expertly engineered to accommodate the Ford Accessories trailer hitch for additional versatility.
- For use when adding a Ford accessory trailer hitch to your Explorer, expertly engineered to conceal the Ford Accessories trailer hitch for a clean finished appearance.
- Constructed of reinforced, injection-molded, thermoformed plastic for strength and structural rigidity.
- Finished with a durable Carbon Black clearcoat.
- Includes fascia, plus mounting hardware.
- Dealer installation recommended.
Product Specifications- Other Name: Cover
Fits the following Ford Models
- 2016-2017 Ford Explorer
- For vehicles without Class II or Class III Trailer Tow Packages.
- Recommended when installing a Ford accessory trailer hitch.
- Subtly distinguish the back of your Explorer with this pre-painted lower fascia section that's expertly engineered to accommodate the Ford Accessories trailer hitch for additional versatility.
- For use when adding a Ford accessory trailer hitch to your Explorer, expertly engineered to conceal the Ford Accessories trailer hitch for a clean finished appearance.
- Constructed of reinforced, injection-molded, thermoformed plastic for strength and structural rigidity.
- Finished with a durable Silver Lining clearcoat.
- Includes lower fascia, hitch cover, installation sheet and mounting hardware.
- Dealer installation recommended.
Product Specifications- Other Name: Cover
Fits the following Ford Models
- 2016-2017 Ford Explorer
- Recommended when installing a Ford accessory trailer hitch.
- Subtly distinguish the back of your Explorer with this pre-painted lower fascia section that's expertly engineered to accommodate the Ford Accessories trailer hitch for additional versatility.
- For use when adding a Ford accessory trailer hitch to your Explorer, expertly engineered to conceal the Ford Accessories trailer hitch for a clean finished appearance.
- Constructed of reinforced, injection-molded, thermoformed plastic for strength and structural rigidity.
- Finished with a durable Absolute Black clearcoat.
- Includes fascia, plus mounting hardware.
- Dealer installation recommended.
