How to remove and install the door lock on Ford Crown Victoria?

Remove the door trim panel and peel the watershield back. Next, take out the remote control assembly and disconnect the rod at the control and the lock cylinder by removing the retaining screws, then pull the remote control out and disconnect it from the rod. Disconnect the push button rod and handle from the latch. Remove the screws located at the end of the door and detach the latch, which is held in place by two screws. Installation is the reverse of removal.

Genuine Ford Crown Victoria Door Lock

Power Door Lock Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Door Locks found

View related parts
Ford Crown Victoria Trunk Lock Assembly
Part Number: 7W7Z-5443200-A
$64.20 MSRP: $97.27
You Save: $33.07 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy; Latch Assembly, Lock
- Replaces: 6W7Z-5443200-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Ford Crown Victoria | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, 4AT, 4AT 4R75W, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Lock Assembly
Part Number: 6W7Z-5426412-B
$34.80 MSRP: $49.57
You Save: $14.77 (30%)
Product Specifications
- Other Name: Lock Assy; Latch Assembly, Lock
- Position: Passenger Side
- Replaces: 6W7Z-5426412-A, 5W7Z-5426412-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2011 Ford Crown Victoria | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, 4AT, 4AT 4R75W, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Stop - Contact Switch
Part Number: 6W7Z-5426413-B
Product Specifications
- Other Name: Latch Assembly, Lock
- Position: Driver Side
- Replaces: 5W7Z-5426413-AA, 6W7Z-5426413-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2011 Ford Crown Victoria | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, 4AT, 4AT 4R75W, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)

Ford Crown Victoria Door Lock

The Ford Crown Victoria has a number of electronic components as the following parts that are important in locking doors of the vehicle for safety. Main purpose of the device is to lock the doors and not to open them until the key is inserted into the lock, thus avoiding any unnecessary interruption by any stranger who might want to intrude into the car and jeopardize the safety of the passengers besides the driver. Starting with only key operated locks, Ford Crown Victoria came with power operated locks, remote control locks and automatic locks to mention but a few. Door locking and unlocking systems in Ford Crown Victoria, all the doors can be locked and unlocked at once using a switch resulting in comfort to drivers. Remote keyless entry systems are integrated to allow operations of doors using a key fob thus improving accessibility. Further, some models may have automatic lock that engages when the car is shifted into gear or reach a certain speed. These are development that show how door lock system in the Ford Crown Victoria has transformed with time to achieve better security and ease of use.

We provide a wide range of Ford Crown Victoria Door Lock at the best prices possible. If you need Ford Crown Victoria Door Lock, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Crown Victoria Door Lock Parts Questions & Experts Answers

Lock Assembly
6W7Z-5426412-B
Q: How to remove and install the door lock on Ford Crown Victoria?
A: Remove the door trim panel and peel the watershield back. Next, take out the remote control assembly and disconnect the rod at the control and the lock cylinder by removing the retaining screws, then pull the remote control out and disconnect it from the rod. Disconnect the push button rod and handle from the latch. Remove the screws located at the end of the door and detach the latch, which is held in place by two screws. Installation is the reverse of removal.