How do you remove the heater core on Ford Crown Victoria?

Taking out the heater core is a process that involves disconnecting the negative battery cable and draining the cooling system. One needs to unplug the tubes on the heater hoses from the core. One must also remove nuts as well as vacuum hoses. Other interior trim parts, like instrument panel trim, steering column covers, and reinforcement brace, need to be removed. The door sill plates should be loosened, cowl trim panels removed, and instrument panel bolts taken out. After lowering the steering column, retaining screws are removed to pull back the instrument panel. Wiring harnesses and vacuum components are disconnected from it. The floor air distribution duct is then removed. Move the plenum and remove it too.

Genuine Ford Crown Victoria Heater Core

HVAC Heater Core

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Heater Cores found

View related parts
Ford Crown Victoria Heater Assy - Less Radiator
Part Number: E9AZ-18476-A
Product Specifications
- Other Name: Core Assy - Heater
- Replaced by: YW7Z-18476-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-2000 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W, 4AT AOD, 4AT AOD-E
View related parts
Ford Crown Victoria Core Assembly - Heater
Part Number: YW7Z-18476-AA
Product Specifications
- Other Name: Core Assy - Heater
- Manufacturer Note: Core
- Replaces: E9AZ-18476-A, HC-4
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-2011 Ford Crown Victoria | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, 4AT, 4AT 4R70W, 4AT 4R75W, 4AT AOD, 4AT AOD-E, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)

Ford Crown Victoria Heater Core Parts Questions & Experts Answers

Heater Assy - Less Radiator
E9AZ-18476-A
Q: How do you remove the heater core on Ford Crown Victoria?
A: Taking out the heater core is a process that involves disconnecting the negative battery cable and draining the cooling system. One needs to unplug the tubes on the heater hoses from the core. One must also remove nuts as well as vacuum hoses. Other interior trim parts, like instrument panel trim, steering column covers, and reinforcement brace, need to be removed. The door sill plates should be loosened, cowl trim panels removed, and instrument panel bolts taken out. After lowering the steering column, retaining screws are removed to pull back the instrument panel. Wiring harnesses and vacuum components are disconnected from it. The floor air distribution duct is then removed. Move the plenum and remove it too.

Genuine Ford Crown Victoria Heater Core

2 Heater Cores found

Ford Crown Victoria Heater Assy - Less Radiator

Ford Crown Victoria Core Assembly - Heater

Ford Crown Victoria Heater Core Parts Questions & Experts Answers

Related Ford Crown Victoria Parts

Browse by Year