How do you check and replace fuel injectors, Fuel Pressure Regulator,Fuel Rail,Intake Manifold,Throttle Body and Throttle Position Sensor on a Ford Crown Victoria 5.0L engine?

The first step in removing the air intake plenum and throttle body on a 5.0L engine involves disconnecting the negative battery cable. Also, unplug electrical connectors at the air bypass valve, throttle position sensor, and EGR position sensor. Disconnect the accelerator cable and transmission linkage from the throttle body assembly, remove the accelerator cable/TV cable bracket from the intake manifold, and label and detach vacuum lines from the upper intake manifold vacuum tree, EGR valve, and fuel pressure regulator. Make sure to disconnect the PCV system or any canister purge line if it is present and also downsize the water pipes of spacer coolant lines for EGR. Unbolt six (6) upper manifold retaining bolts to separate the upper manifold and throttle body as an assembly from the lower manifold. Ensure the gasket is in place during installation, attach new gasket(s) onto lower intake mounting face, and snug up air intake plenum with throttle body assembly by using six (6) upper manifold retaining bolts right up to the recommended torque value.

Genuine Ford Crown Victoria Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Throttle Bodies found

View related parts
Ford Crown Victoria Throttle Body And Motor Assembly
Part Number: 9W7Z-9E926-A
$213.03 MSRP: $352.73
You Save: $139.70 (40%)
ADD TO CART
Product Specifications
- Other Name: Throttle Body And Motor Assy; Throttle Body
- Manufacturer Note: Non Heated
- Replaces: 3L5Z-9E926-AD, 6R3Z-9E926-AA, 9W7Z-9E926-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2011 Ford Crown Victoria | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, 4AT, 4AT 4R75W, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Throttle Body And Motor Assy
Part Number: 6R3Z-9E926-AA
$213.03 MSRP: $352.73
You Save: $139.70 (40%)
ADD TO CART
Product Specifications
- Manufacturer Note: Non Heated
- Replaced by: 9W7Z-9E926-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2008 Ford Crown Victoria | 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Throttle Body And Motor Assembly
Part Number: 3L5Z-9E926-AD
$211.46 MSRP: $352.73
You Save: $141.27 (41%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Throttle Body And Motor Assy
- Replaced by: 9W7Z-9E926-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2006 Ford Crown Victoria | 8 Cyl 4.6L | 4AT, 4AT 4R75W
View related parts
Ford Crown Victoria Body Assembly - Carburettor Throttle
Part Number: F8AZ-9E926-AA
Product Specifications
- Other Name: Body Assy - Carburettor Throttle
- Manufacturer Note: NGV
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2004 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W, 4AT 4R75W

Ford Crown Victoria Throttle Body

Throttle Body in Ford Crown Victoria automobiles is a constituent that determines the amount of air supplied to the engine, depending on the accelerator pedal position. Sitting right between the air filter box and the intake manifold, it has a butterfly valve for control of air intake. Modern automobiles have different models where a simpler Throttle Body Injection (TBI) was used in past models where as the current automobile brands have multi-port fuel injection system with distinct fuel delivery systems. Today, Electronic Throttle Control (ETC) is already standard and has limited the use of mechanical linkage, which incorporate better safety features. Throttle bodies can be cleaned or fully replaced depending on the situation and other parts such as the TPS sensor and IAC valve can be replaced. In sum, development of the throttle body systems from simple carburetors to complex systems has improved the efficiency of the engine as well as the regulators in Ford Crown Victoria automobiles.

We provide a wide range of Ford Crown Victoria Throttle Body at the best prices possible. If you need Ford Crown Victoria Throttle Body, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Crown Victoria Throttle Body Parts Questions & Experts Answers

Throttle Body And Motor Assembly
3L5Z-9E926-AD
Q: How do you check and replace fuel injectors, Fuel Pressure Regulator,Fuel Rail,Intake Manifold,Throttle Body and Throttle Position Sensor on a Ford Crown Victoria 5.0L engine?
A: The first step in removing the air intake plenum and throttle body on a 5.0L engine involves disconnecting the negative battery cable. Also, unplug electrical connectors at the air bypass valve, throttle position sensor, and EGR position sensor. Disconnect the Accelerator Cable and transmission linkage from the throttle body assembly, remove the accelerator cable/TV cable bracket from the intake manifold, and label and detach vacuum lines from the upper intake manifold vacuum tree, EGR valve, and fuel pressure regulator. Make sure to disconnect the PCV system or any canister purge line if it is present and also downsize the water pipes of spacer coolant lines for EGR. Unbolt six (6) upper manifold retaining bolts to separate the upper manifold and throttle body as an assembly from the lower manifold. Ensure the gasket is in place during installation, attach new gasket(s) onto lower intake mounting face, and snug up air intake plenum with throttle body assembly by using six (6) upper manifold retaining bolts right up to the recommended torque value.