How to maintain and replace windshield wiper blades on Ford Crown Victoria?

It is common for wiper blades to be covered with a layer of road film that may disrupt their operation. Clean them occasionally using a light detergent. Check the wiper's assembly for signs of cracks or other damage. If necessary, fit new blades. Wet the windscreen and put the wipers on in order to look for streaks or irregular patterns. This will help remove some slackness from these fasteners as may become necessary. To get rid of the blade assembly, depress the release spring and separate it from the arm pin by pulling it out. When installing one has to push in firmly on the blade until it fixes on the pin. Remove the entire rubber blade element by inserting a screwdriver into it and releasing it from its retaining claw. For this purpose, slide out the old element and back in the new one while securing it with a strip of backing material at its head end side. Ensure that all claws are engaged before fitting arm to blade joining mechanism.

Genuine Ford Crown Victoria Wiper Blade

Windshield Wiper Blade

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Wiper Blades found

View related parts
Ford Crown Victoria Wiper Blade Assembly
Part Number: 2U2Z-17528-EA
$13.73 MSRP: $18.75
You Save: $5.02 (27%)
ADD TO CART
Product Specifications
- Other Name: Blade Assembly - Wiper
- Position: Passenger Side
- Replaced by: GU2Z-17V528-L
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992 Ford Crown Victoria | 8 Cyl 4.6L | 4AT AOD, 4AT AOD-E
View related parts
Ford Crown Victoria Wiper Blade Assembly
Part Number: 4W1Z-17528-AA
$13.73 MSRP: $18.75
You Save: $5.02 (27%)
ADD TO CART
Product Specifications
- Other Name: Blade Assembly - Wiper; Wiper Blade
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2011 Ford Crown Victoria | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4AT, 4AT 4R75W, 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Wiper Blade Assembly
Part Number: XL6Z-17528-AA
$13.73 MSRP: $18.75
You Save: $5.02 (27%)
ADD TO CART
Product Specifications
- Other Name: Blade Assembly - Wiper
- Replaced by: GU2Z-17V528-L
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992 Ford Crown Victoria | 8 Cyl 4.6L | 4AT AOD, 4AT AOD-E
View related parts
Ford Crown Victoria Wiper Blade Assembly
Part Number: XF6Z-17528-AA
$10.64 MSRP: $13.98
You Save: $3.34 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade Assembly - Wiper
- Replaced by: MU2Z-17V528-HA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1993 Ford Crown Victoria | 8 Cyl 4.6L | 4AT AOD, 4AT AOD-E
View related parts
Ford Crown Victoria Wiper Blade Assembly
Part Number: 3W7Z-17528-AA
$10.64 MSRP: $13.98
You Save: $3.34 (24%)
Product Specifications
- Other Name: Blade Assembly - Wiper
- Replaced by: MU2Z-17V528-HA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Ford Crown Victoria | 8 Cyl 4.6L | 4AT, 4AT 4R70W, 4AT 4R75W
View related parts
Ford Crown Victoria Wiper Blade Assembly
Part Number: 2U2Z-17528-KA
$0.00
Product Specifications
- Other Name: Blade Assembly - Wiper
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Ford Crown Victoria | 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
- 1992-2004 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W, 4AT 4R75W, 4AT AOD, 4AT AOD-E
View related parts
Ford Crown Victoria Wiper Blade Assembly
Part Number: 4U2Z-17528-FA
$10.64 MSRP: $13.98
You Save: $3.34 (24%)
Product Specifications
- Other Name: Blade Assembly - Wiper
- Position: Passenger Side
- Replaced by: MU2Z-17V528-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992 Ford Crown Victoria | 8 Cyl 4.6L | 4AT AOD, 4AT AOD-E
View related parts
Ford Crown Victoria Wiper Blade Assembly
Part Number: 4U2Z-17528-KA
$10.64 MSRP: $13.98
You Save: $3.34 (24%)
Product Specifications
- Other Name: Blade Assembly - Wiper
- Position: Driver Side
- Replaced by: MU2Z-17V528-HA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-2006 Ford Crown Victoria | 8 Cyl 4.6L | 4AT, 4AT 4R70W, 4AT 4R75W, 4AT AOD, 4AT AOD-E
View related parts
Ford Crown Victoria Wiper Blade Assembly
Part Number: AU2Z-17V528-GA
Product Specifications
- Other Name: Blade Assembly - Wiper
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Ford Crown Victoria | 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Wiper Blade Assembly
Part Number: XW7Z-17528-AA
Product Specifications
- Other Name: Blade Assembly - Wiper; Blade, Insert, Wiper Blade
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-2002 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W, 4AT AOD-E

Ford Crown Victoria Wiper Blade

Wiper Blade of Ford Crown Victoria automobiles is one of the important instruments to reduce the risk of having a blurred vision when driving through different weathers. They are meant to and clean the surface of the glasses removing water, snow, dust, and any other material that may obscure the driver's vision of the road in front of him. Usually in form of a metal which has a rubber like blade, this equipment is driven by an electric or pneumatic motor so that it can swing back an forth in an efficient cleaning of the glass. It has been reported that the post-collision synchronized radial arm may be included for private use on Ford Crown Victoria cars while the large vehicles for commercial use may consist of pantograph arms for efficiency in cleaning. Also, some cars came with windscreen washer systems to complement the wipers by squirting water or anti-freeze fluid on the glass. In general, the Wiper Blade of the Ford Crown Victoria should be properly maintained to achieve safe and proper visibility every time the car is driven.

We provide a wide range of Ford Crown Victoria Wiper Blade at the best prices possible. If you need Ford Crown Victoria Wiper Blade, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Crown Victoria Wiper Blade Parts Questions & Experts Answers

Wiper Blade Assembly
XF6Z-17528-AA
Q: How to maintain and replace windshield wiper blades on Ford Crown Victoria?
A: It is common for wiper blades to be covered with a layer of road film that may disrupt their operation. Clean them occasionally using a light detergent. Check the wiper's assembly for signs of cracks or other damage. If necessary, fit new blades. Wet the windscreen and put the wipers on in order to look for streaks or irregular patterns. This will help remove some slackness from these fasteners as may become necessary. To get rid of the blade assembly, depress the release spring and separate it from the arm pin by pulling it out. When installing one has to push in firmly on the blade until it fixes on the pin. Remove the entire rubber blade element by inserting a screwdriver into it and releasing it from its retaining claw. For this purpose, slide out the old element and back in the new one while securing it with a strip of backing material at its head end side. Ensure that all claws are engaged before fitting arm to blade joining mechanism.