×
- Live Chat
- 1-888-788-9341
My Garage
My Account
Cart
Genuine Ford Edge Exhaust Manifold
Engine Exhaust Manifold- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
9 Exhaust Manifolds found
Ford Edge Exhaust Manifold And Catalyst Assembly
Part Number: BT4Z-5G232-C$775.81 MSRP: $982.86You Save: $207.05 (22%)Ships in 1-2 Business Days
Ford Edge Exhaust Manifold Assembly
Part Number: 7T4Z-9430-C$54.95 MSRP: $80.33You Save: $25.38 (32%)Ships in 1-3 Business Days
Ford Edge Exhaust Manifold Assembly
Part Number: 7T4Z-9431-B$69.52 MSRP: $86.33You Save: $16.81 (20%)
Ford Edge Exhaust Manifold And Catalyst Assembly
Part Number: DB5Z-5G232-A$940.45 MSRP: $1192.86You Save: $252.41 (22%)Ships in 1-3 Business Days
Ford Edge Exhaust Manifold Assembly
Part Number: AT4Z-9430-A$67.49 MSRP: $98.67You Save: $31.18 (32%)Ships in 1-3 Business Days
Ford Edge Exhaust Manifold And Catalyst Assembly
Part Number: F2GZ-5G232-A$810.53 MSRP: $1027.14You Save: $216.61 (22%)Ships in 1-3 Business Days
Ford Edge Exhaust Manifold And Catalyst Assembly
Part Number: BT4Z-5G232-B$775.81 MSRP: $982.86You Save: $207.05 (22%)Ships in 1-2 Business DaysFord Edge Converter Assembly
Part Number: F2GZ-5G232-E$962.85 MSRP: $1221.43You Save: $258.58 (22%)Ships in 1-3 Business Days
Ford Edge Exhaust Manifold
The Off/Gas pipe in Ford Edge vehicles is another very important component that helps in channelling the hot gas produced by the car's engine to the exhaust thus leading to better engine perfomance and conservation of the environment by emitting less to the atmosphere. Depending with the placement of the engine, the manifold is located at different points to avoid intake reversion and to ensure that airflow is maximum which is essential for the engines. Powerful Ford Edge models have worked with two types of exhaust manifold that ranging from cast iron to stainless steel group. There are also headers available which give less flow restriction that also offers better performance than the standard header by offering greater exhaust gas velocity. These design differences such as the number of tubes according to the number of cylinders in the engine are some of the ways that enhance the efficiency of exhaust manifold in containing the flow of the exhaust and improving the performance of the vehicle.
We provide a wide range of Ford Edge Exhaust Manifold at the best prices possible. If you need Ford Edge Exhaust Manifold, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.
Ford Edge Exhaust Manifold Parts Questions & Experts Answers
- Q: How to remove and install the front and rear exhaust manifolds on Ford Edge?A: Before beginning this procedure, allow the engine to cool completely and apply penetrating oil to the manifold and converter fasteners. On 2.7L engines, the exhaust manifold is integrated into the cylinder head, and the turbochargers bolt directly to the cylinder heads. For 2011 through 2014 3.5L and 3.7L models, the front exhaust manifold and the catalytic converter are integrated into one piece, while in 2015 and later 3.5L models, both exhaust manifolds are integrated with the catalytic converters. To remove the front exhaust manifold, disconnect the cable from the negative battery terminal, disconnect the electrical connector for the oxygen sensor and the catalytic converter monitor, and on 2015 and later models, remove the cooling fan shroud assembly. Raise the front of the vehicle and support it securely on jackstands, then disconnect the exhaust Y-pipe from below. Remove the heat shield over the front exhaust manifold, discard the six nuts securing the exhaust manifold, and remove the manifold and converter. Extract the exhaust manifold studs using a stud holding tool or a pair of nuts tightened together over a stud, and discard them. Use a scraper to remove all old gasket material and carbon deposits from the manifold and cylinder head mating surfaces, being cautious not to gouge the aluminum engine parts. Install new exhaust manifold studs with light oil on the threads, place a new manifold gasket over the studs, and install the manifold with new self-locking nuts. Tighten the nuts, starting with the center fasteners and working towards the ends, to the specified torque, and complete the installation in reverse order. For the rear exhaust manifold, disconnect the cable from the negative battery terminal and the connector to the rear bank oxygen sensor, then raise the vehicle and support it securely on jackstands. Remove the Y-pipe-to-catalytic converter flange nuts and disconnect the Y-pipe, and for 2014 and earlier models, remove the rear-bank catalytic converter. Discard the six exhaust manifold mounting nuts and remove the manifold from the engine, along with the manifold gasket. Extract the exhaust manifold studs and discard them, then scrape off all gasket material and carbon deposits from the mating surfaces, taking care with aluminum parts. Install new exhaust manifold studs with light oil on the threads, place a new manifold gasket over the studs, and install the manifold with new self-locking nuts. Tighten the nuts, starting with the center fasteners and working towards the ends, to the specified torque, and complete the installation in reverse order.
