How to adjust the parking brake cable on Ford Edge?

The parking brake is adjusted at two locations, one at the parking brake pedal in the driver's compartment and the other at the parking brake equalizer under the vehicle. The following dimensions are preliminary adjustments. As the cables age and stretch, it is most likely that these dimensions will have to be exceeded to obtain satisfactory parking brake operation. It's important not to over-adjust the cables, as this could cause the brakes to drag. To adjust the parking brake, first release the parking brake pedal. Use a wrench to tighten the adjusting nut so that the exposed threads equal 5/64-inch (2 mm). When the parking brake cables are old, they may have stretched and require more threads showing on the adjuster. Next adjust the cable at the equalizer from under the vehicle. The equalizer is located where the parking brake cable comes through the underside of the vehicle beneath the driver's seat. Use a wrench to tighten the adjusting nut on the equalizer so that the exposed threads equal 51/64-inch (20 mm). Verify the parking brake is actually holding the vehicle when applied. Raise and support the rear of the vehicle and block the front wheels. You can rotate the rear tires by hand to check for proper cable adjustment. Depress the pedal slightly, this should apply noticeable drag on the rear brakes. With the pedal 2/3 to the floor, the rear brakes should be locked. With the parking brake pedal released all the way, there should be no drag on the wheels.

Genuine Ford Edge Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Parking Brake Cables found

View related parts
Ford Edge Cable Assembly - Parking Brake
Part Number: BT4Z-2A635-B
$43.27 MSRP: $67.82
You Save: $24.55 (37%)
ADD TO CART
Product Specifications
- Other Name: Rear Cable
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2014 Ford Edge | 4 Cyl 2.0L EcoBoost (240PS) , 6 Cyl 3.5L DOHC VCT SMPI, 6 Cyl 3.7L DOHC | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Edge Cable Assy - Parking Brake
Part Number: BT4Z-2A635-A
$45.37 MSRP: $72.36
You Save: $26.99 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rear Cable
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2014 Ford Edge | 4 Cyl 2.0L EcoBoost (240PS) , 6 Cyl 3.5L DOHC VCT SMPI, 6 Cyl 3.7L DOHC | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Edge Cable Assembly - Parking Brake
Part Number: BT4Z-2853-A
$51.70 MSRP: $102.73
You Save: $51.03 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Front Cable
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2014 Ford Edge | 4 Cyl 2.0L EcoBoost (240PS) , 6 Cyl 3.5L DOHC VCT SMPI, 6 Cyl 3.7L DOHC | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Edge Cable Assy - Parking Brake
Part Number: 7T4Z-2A603-A
$28.00 MSRP: $38.26
You Save: $10.26 (27%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Rear Cable
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Edge | 6 Cyl 3.5L DOHC VCT SMPI | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Edge Cable Assy - Parking Brake
Part Number: 7T4Z-2A635-A
Product Specifications
- Other Name: Rear Cable
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Edge | 6 Cyl 3.5L DOHC VCT SMPI | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Edge Cable Assembly - Parking
Part Number: 7T4Z-2853-B
Product Specifications
- Other Name: Cable Assy - Parking Brake
- Replaced by: 8T4Z-2853-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007 Ford Edge | 6 Cyl 3.5L DOHC VCT SMPI | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Edge Cable Assy - Parking Brake
Part Number: 8T4Z-2853-A
Product Specifications
- Other Name: Front Cable
- Replaces: 7T4Z-2853-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Edge | 6 Cyl 3.5L DOHC VCT SMPI | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive

Ford Edge Parking Brake Cable

Parking Brake Cable in Ford Edge vehicles is one of the most vital apparatus of the parking brake system in that it is designed to make sure that the car does not roll when parked especially when the parking lot has an inclination. This cable joins the parking brake commonly referred to as the emergency brake or hand brake to the braking system so as to facilitate the engagement of the parking brake. Years of production could entail that Ford Edge different models use different styles of Parking Brake Cable, invented and intended to meet certain safety and performance aspects. The signs of a bad Parking Brake Cable include inadequate tension, where the parking brake will not secure the vehicle nor hold its position as it should do, or complete failure of the very cable if it has broken. It can therefore be held that there is an important public interest in the proper functioning of the Parking Brake Cable with some amount of priority given to safety and reliability of the Ford Edge.

We provide a wide range of Ford Edge Parking Brake Cable at the best prices possible. If you need Ford Edge Parking Brake Cable, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Edge Parking Brake Cable Parts Questions & Experts Answers

Cable Assy - Parking Brake
BT4Z-2A635-A
Q: How to adjust the parking brake cable on Ford Edge?
A: The parking brake is adjusted at two locations, one at the parking brake pedal in the driver's compartment and the other at the parking brake equalizer under the vehicle. The following dimensions are preliminary adjustments. As the cables age and stretch, it is most likely that these dimensions will have to be exceeded to obtain satisfactory parking brake operation. It's important not to over-adjust the cables, as this could cause the brakes to drag. To adjust the parking brake, first release the parking brake pedal. Use a wrench to tighten the adjusting nut so that the exposed threads equal 5/64-inch (2 mm). When the parking brake cables are old, they may have stretched and require more threads showing on the adjuster. Next adjust the cable at the equalizer from under the vehicle. The equalizer is located where the parking brake cable comes through the underside of the vehicle beneath the driver's seat. Use a wrench to tighten the adjusting nut on the equalizer so that the exposed threads equal 51/64-inch (20 mm). Verify the parking brake is actually holding the vehicle when applied. Raise and support the rear of the vehicle and block the front wheels. You can rotate the rear tires by hand to check for proper cable adjustment. Depress the pedal slightly, this should apply noticeable drag on the rear brakes. With the pedal 2/3 to the floor, the rear brakes should be locked. With the parking brake pedal released all the way, there should be no drag on the wheels.