How to replace a driveaxle oil seal in a Ford Edge?

Raise rear of the vehicle, support securely on jackstands. Place transaxle in Neutral, parking brake off. Block front wheels. Remove driveaxle(s). Pry out Wheel Seal carefully. Install new Wheel Seal using seal installer or large socket. Lubricate lip of seal with grease, then install driveaxle. Check and add differential lubricant as needed.

Genuine Ford Edge Wheel Seal

Wheel Axle Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wheel Seals found

View related parts
Ford Edge Seal
Part Number: 5L8Z-4B416-AA
$12.48 MSRP: $17.78
You Save: $5.30 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: 58mm
- Position: Driver Side
- Replaces: F57Z-3254-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2014 Ford Edge | 4 Cyl 2.0L EcoBoost (240PS) , 6 Cyl 3.5L DOHC VCT SMPI, 6 Cyl 3.7L DOHC | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Edge SEAL
Part Number: CV6Z-4B416-D
$35.75 MSRP: $46.50
You Save: $10.75 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Axle Seal, Output Shaft Seal, Side Seal
- Replaces: CV6Z-4B416-C, CV6Z-4B416-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2024 Ford Edge | 4 Cyl 2.0 L GAS, 4 Cyl 2.0L DOHC, 4 Cyl 2.0L Duratorq-TDCi (132kW/180PS), 4 Cyl 2.0L EcoBoost (240PS), 6 Cyl 2.7 L GAS, 6 Cyl 2.7L, 6 Cyl 3.5L Cyclone Petrol TIVCT, 6 Cyl 3.5L DOHC VCT SMPI, 6 Cyl 3.7L DOHC | 6-Speed Automatic Transmission 6DCT450 - MPS6, 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, 6-Speed Manual Transaxle - MMT6, 8-Speed Automatic Transmission 8F57, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive, RHD 4WD (FTD)

Ford Edge Wheel Seal Parts Questions & Experts Answers

Seal
5L8Z-4B416-AA
Q: How to replace a driveaxle oil seal in a Ford Edge?
A: Raise rear of the vehicle, support securely on jackstands. Place transaxle in Neutral, parking brake off. Block front wheels. Remove driveaxle(s). Pry out Wheel Seal carefully. Install new Wheel Seal using seal installer or large socket. Lubricate lip of seal with grease, then install driveaxle. Check and add differential lubricant as needed.