What is the purpose and function of the Evaporative Emissions Control system,Canister Purge Valve,Fuel Pressure Sensor and Vapor Canister on Ford Escape?

The Evaporative Emissions Control (EVAP) system is the system that is used to reduce the chance for fuel system emissions to evaporate and release unburned hydrocarbons into the atmosphere. During hot days, fumes in the fuel tank expand and when there is pressure build up, them is passed through the fuel vapor vent valve and the fuel vapor control valve to the EVAP canister where it is stored for some time until the engine can use it. The many elements of this system are installed underneath the vehicle; these are EVAP canister which is packed with activated charcoal, the check valve, dust separator and the canister vent solenoid. The fuel tank pressure sensor measures pressure inside the tank, and sends data to the PCM during leak tests. The fuel vapor vent valve regulates vapors that are to be admitted into the EVAP system while the fuel vapor control valve shuts off liquid fuel from entering the canister during fuelling. The canister vent solenoid is open most of the time and tests to seal the system and the EVAP check valve vents the air during refueling. The canister purge valve managed by the PCM controls the flow of the vapor into the intake manifold and its working is dependent on the manifold vacuum and the sensor. Some of the typical signs that indicate a defective-evaporative emission control system include foul smell of fuel, rough idle, and stalling, and in most cases, the hose connections and some of the components associated with the system are often checked for damages or leakage. To ensure that there is no increased fuel vapor pressure then the gas cap should be disconnected so that pressure can be heard to be escaping. Component replacement entails a step of disconnecting the battery and when replacing particular components, there is need to remove them and replace them with the right part and reconnection of the PCM for better performance.

Genuine Ford Escape Fuel Pressure Sensor

Fuel Tank Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Fuel Pressure Sensors found

View related parts
Ford Escape Fuel Injector Pressure Sensor
Part Number: 3F2Z-9G756-AC
$86.68 MSRP: $143.27
You Save: $56.59 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor - Fuel Injector Pressure; Damper, Pressure Sensor
- Manufacturer Note: Also serviced in 9F792. Mounting screws W705870-S437, 6.8L
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2008 Ford Escape | 4 Cyl 2.3L, 4 Cyl 2.3L Hybrid Gas/Electric DOHC, 6 Cyl 3.0L DOHC EFI Modular | 4AT CD4E, 5-Speed Manual Transmission, 5-Speed Manual Transmission - AK, 6-Speed Automatic Transmission 6F Mid-Range, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Right Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive), Two-Wheel Drive (Right Hand Drive)
View related parts
Ford Escape Fuel Injector Pressure Sensor
Part Number: BU5Z-9F972-B
$52.47 MSRP: $86.73
You Save: $34.26 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Fuel Injector Pressure; Pressure Sensor, Sensor
- Replaces: BU5Z-9F972-A, CM-5226
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Escape | 4 Cyl 1.5L EcoBoost 16V (180PS), 4 Cyl 1.6L EcoBoost SCTi -Sigma, 4 Cyl 2.0L, 4 Cyl 2.0L EcoBoost (240PS) | 6-Speed Automatic Transmission 6F Mid-Range, Four-Wheel Drive, Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Front-Wheel Drive (Right Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive)
View related parts
Ford Escape Fuel Injector Pressure Sensor
Part Number: EJ7Z-9F972-A
$72.49 MSRP: $119.82
You Save: $47.33 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Fuel Injector Pressure; Pressure Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2019 Ford Escape | 4 Cyl 2.0L EcoBoost (240PS) | 6-Speed Automatic Transmission 6F Mid-Range, Four-Wheel Drive, Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Front-Wheel Drive (Right Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive)
View related parts
Ford Escape Fuel Injector Pressure Sensor
Part Number: BM5Z-9F972-A
$67.98 MSRP: $112.36
You Save: $44.38 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor - Fuel Injector Pressure; Pressure Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Escape | 4 Cyl 1.6L EcoBoost SCTi -Sigma, 4 Cyl 2.0L | 6-Speed Automatic Transmission 6F Mid-Range, Four-Wheel Drive, Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Front-Wheel Drive (Right Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive)
View related parts
Ford Escape Fuel Injector Pressure Sensor
Part Number: DS7Z-9F972-B
$60.29 MSRP: $119.82
You Save: $59.53 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Fuel Injector Pressure
- Replaced by: DS7Z-9F972-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2019 Ford Escape | 4 Cyl 1.5L EcoBoost 16V (180PS) | 6-Speed Automatic Transmission 6F Mid-Range, Four-Wheel Drive, Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Front-Wheel Drive (Right Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive)
View related parts
Ford Escape Fuel Injector Pressure Sensor
Part Number: H6BZ-9F972-A
$54.26 MSRP: $86.55
You Save: $32.29 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Fuel Injector Pressure; Pressure Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford Escape | 3 Cyl 1.5 L GAS
View related parts
Ford Escape Fuel Injector Pressure Sensor
Part Number: K2GZ-9F972-B
$86.41 MSRP: $137.82
You Save: $51.41 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Fuel Injector Pressure; Pressure Sensor
- Replaces: CM-5293, NL3Z-9F972-A, K2GZ-9F972-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford Escape | 4 Cyl 2.0 L GAS
View related parts
Ford Escape SENSOR - FUEL INJECTOR PRESSUR
Part Number: HX7Z-9G756-A
$75.47 MSRP: $120.36
You Save: $44.89 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pressure Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford Escape | 3 Cyl 1.5 L GAS
View related parts
Ford Escape SENSOR - FUEL INJECTOR PRESSUR
Part Number: P2GZ-9F972-C
$50.58 MSRP: $79.27
You Save: $28.69 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pressure Sensor
- Replaces: CM-5342, P2GZ-9F972-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023 Ford Escape | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS
View related parts
Ford Escape SENSOR - FUEL INJECTOR PRESSUR
Part Number: P2GZ-9F972-D
$29.72 MSRP: $46.18
You Save: $16.46 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pressure Sensor
- Replaces: P2GZ-9F972-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023 Ford Escape | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS

Ford Escape Fuel Pressure Sensor

The Fuel Pressure Sensor in Ford Escape automobile is sometimes called the Fuel tank pressure sensor It is responsible for maintaining the pressure in the tank as well as the rail. This sensor sends information to PCM to allow it to control fuel pressure for efficiency of the engine. The Fuel Pressure Sensor is a component that could cause various concerns, among which include issues that usually arise when trying to start a vehicle, poor fuel economy and other engine-related problems which are sometimes accompanied by warning signs mainly involving the check engine lamp. Throughout the years Fuel Pressure Sensors that have been used in Ford Escape include fuel tank pressure sensor and fuel rail pressure sensor. Both kinds are essentially used for the purpose of pressure measurement The two differ in location as well as measuring pressure. Maintenance of these sensors is crucial hence making Ford Escape to work optimally and as required.

We provide a wide range of Ford Escape Fuel Pressure Sensor at the best prices possible. If you need Ford Escape Fuel Pressure Sensor, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Escape Fuel Pressure Sensor Parts Questions & Experts Answers

Fuel Injector Pressure Sensor
3F2Z-9G756-AC
Q: What is the purpose and function of the Evaporative Emissions Control system,Canister Purge Valve,Fuel Pressure Sensor and Vapor Canister on Ford Escape?
A: The Evaporative Emissions Control (EVAP) system is the system that is used to reduce the chance for fuel system emissions to evaporate and release unburned hydrocarbons into the atmosphere. During hot days, fumes in the fuel tank expand and when there is pressure build up, them is passed through the fuel vapor vent valve and the fuel vapor control valve to the EVAP canister where it is stored for some time until the engine can use it. The many elements of this system are installed underneath the vehicle; these are EVAP canister which is packed with activated charcoal, the check valve, dust separator and the canister vent solenoid. The fuel tank pressure sensor measures pressure inside the tank, and sends data to the PCM during leak tests. The fuel vapor vent valve regulates vapors that are to be admitted into the EVAP system while the fuel vapor control valve shuts off liquid fuel from entering the canister during fuelling. The canister vent solenoid is open most of the time and tests to seal the system and the EVAP check valve vents the air during refueling. The canister purge valve managed by the PCM controls the flow of the vapor into the intake manifold and its working is dependent on the manifold vacuum and the sensor. Some of the typical signs that indicate a defective-evaporative emission control system include foul smell of fuel, rough idle, and stalling, and in most cases, the hose connections and some of the components associated with the system are often checked for damages or leakage. To ensure that there is no increased fuel vapor pressure then the gas cap should be disconnected so that pressure can be heard to be escaping. Component replacement entails a step of disconnecting the battery and when replacing particular components, there is need to remove them and replace them with the right part and reconnection of the PCM for better performance.

Related Ford Escape Parts

Browse by Year

2023 Fuel Pressure Sensor 2022 Fuel Pressure Sensor 2021 Fuel Pressure Sensor 2020 Fuel Pressure Sensor 2019 Fuel Pressure Sensor 2018 Fuel Pressure Sensor 2017 Fuel Pressure Sensor 2016 Fuel Pressure Sensor 2015 Fuel Pressure Sensor 2014 Fuel Pressure Sensor 2013 Fuel Pressure Sensor 2008 Fuel Pressure Sensor 2007 Fuel Pressure Sensor 2006 Fuel Pressure Sensor 2005 Fuel Pressure Sensor 2004 Fuel Pressure Sensor