How do you check and adjust valve clearances on Ford Escape?

For the 2.0L engine, start by unscrewing of the valve cover while positioning the number 1 cylinder on TDC on the compression stroke while the intake and exhaust cam lobes are facing upwards. The thickness of shims that fits tightly should be noted by measuring the clearance between the cam lobe base and the shim using feeler gauge for each valve. Turn the crankshaft again by 180 degrees clockwise to take the clearances for the cylinder No. 3, and also for the cylinder No. 4 and No. 2. If they are clearances are beyond the set range, some changes will be required. Because of the restricted installation space of the camshafts and cylinder head special tools are used for adjustments. To change a shim, you need to lower the piston from TDC by merely turning the crankshaft roughly 90 degrees clockwise in order to prevent the bending of the valve. Refer to the manufacturer service tool to proceed and lower the cam follower while taking off the shim and measuring its thickness. In the vicinity of small clearance, use a thinner shim; at large clearance, use a thicker shim. Once you have adjusted the clearances on the first cylinder, turn the crankshaft two full turns in order to set all installed shims, bring the crankshaft back to TDC and check all the clearances once again adjusting them if necessary. As for the 2.3L/2.5L engines, the procedure to check the valve clearances is quite the same as with the 2.0L, but due to the use of hydraulic tappets and cam followers with heads of various thickness to obtain the required clearance, the camshafts have to be removed to change followers.

Genuine Ford Escape Intake Valve

Engine Intake Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Intake Valves found

View related parts
Ford Escape Valve - Inlet
Part Number: AL8Z-6507-A
$16.99 MSRP: $24.83
You Save: $7.84 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Intake Valve
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2012 Ford Escape | 6 Cyl 3.0L OHC Duratec | 4AT CD4E, 5-Speed Manual Transmission - AK, 6-Speed Automatic Transmission 6F Mid-Range, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Escape Valve - Inlet
Part Number: 1S7Z-6507-AA
$10.09 MSRP: $14.62
You Save: $4.53 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: Intake
- Replaced by: 9S4Z-6507-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2012 Ford Escape | 4 Cyl 2.3L, 4 Cyl 2.3L Hybrid Gas/Electric DOHC, 4 Cyl 2.5L Duratec (110kW/150PS), 4 Cyl 2.5L PFI Gas/Electric | 4AT CD4E, 5-Speed Manual Transmission, 5-Speed Manual Transmission - AK, 6-Speed Automatic Transmission 6F Mid-Range, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Right Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive), Two-Wheel Drive (Right Hand Drive)
View related parts
Ford Escape Inlet Valve
Part Number: 9S4Z-6507-C
$10.09 MSRP: $14.62
You Save: $4.53 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Inlet; Intake Valve
- Replaces: 1S7Z-6507-AA, 9S4Z-6507-A, 9S4Z-6507-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2023 Ford Escape | 4 Cyl 2.3L, 4 Cyl 2.3L Hybrid Gas/Electric DOHC, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5L Duratec (110kW/150PS), 4 Cyl 2.5L Duratec FFV (125kW/170PS), 4 Cyl 2.5L PFI Gas/Electric | 4AT CD4E, 5-Speed Manual Transmission, 5-Speed Manual Transmission - AK, 6-Speed Automatic Transmission 6F Mid-Range, CVT Auto Trans Powersplit Elec, Four-Wheel Drive, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Four-Wheel Drive (Right Hand Drive), Front-Wheel Drive (Left Hand Drive), Front-Wheel Drive (Right Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive), Two-Wheel Drive (Right Hand Drive)
View related parts
Ford Escape Valve - Inlet
Part Number: 9S4Z-6507-A
$10.09 MSRP: $14.62
You Save: $4.53 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 9S4Z-6507-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Escape | 4 Cyl 2.5L Duratec (110kW/150PS), 4 Cyl 2.5L Duratec FFV (125kW/170PS) | 6-Speed Automatic Transmission 6F Mid-Range, Four-Wheel Drive, Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Front-Wheel Drive (Right Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive)
View related parts
Ford Escape Valve - Inlet
Part Number: 1S7Z-6507-B
$12.29 MSRP: $17.50
You Save: $5.21 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Intake Valve
- Manufacturer Note: Intake
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2022 Ford Escape | 4 Cyl 2.0 L GAS, 4 Cyl 2.0L, 4 Cyl 2.0L EcoBoost (240PS) | 6-Speed Automatic Transmission 6F Mid-Range, Four-Wheel Drive, Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Front-Wheel Drive (Right Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive)
View related parts
Ford Escape Valve - Inlet
Part Number: BM5Z-6507-B
$11.38 MSRP: $16.63
You Save: $5.25 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Intake Valve
- Replaces: BM5Z-6507-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Escape | 4 Cyl 1.5L EcoBoost 16V (180PS), 4 Cyl 1.6L EcoBoost SCTi -Sigma | 6-Speed Automatic Transmission 6F Mid-Range, Four-Wheel Drive, Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Front-Wheel Drive (Right Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive)
View related parts
Ford Escape Valve - Inlet
Part Number: BM5Z-6507-A
$11.38 MSRP: $16.63
You Save: $5.25 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Replaced by: BM5Z-6507-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Escape | 4 Cyl 1.6L EcoBoost SCTi -Sigma | 6-Speed Automatic Transmission 6F Mid-Range, Four-Wheel Drive, Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Front-Wheel Drive (Right Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive)
View related parts
Ford Escape Valve - Inlet
Part Number: F8RZ-6507-BA
$13.73 MSRP: $13.77
You Save: $0.04 (1%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Exhaust Valve, Intake Valve, Valve
- Replaces: F5RZ-6507-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2004 Ford Escape | 4 Cyl 2.0L Zetec EFI | 4AT CD4E, 5-Speed Manual Transmission, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Right Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive), Two-Wheel Drive (Right Hand Drive)
View related parts
Ford Escape Valve - Inlet
Part Number: 7L8Z-6507-A
$18.13 MSRP: $26.50
You Save: $8.37 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Intake Valve
- Manufacturer Note: STD
- Replaces: F6DZ-6507-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2009 Ford Escape | 6 Cyl 3.0L DOHC EFI Modular, 6 Cyl 3.0L OHC Duratec | 4AT CD4E, 5-Speed Manual Transmission, 5-Speed Manual Transmission - AK, 6-Speed Automatic Transmission 6F Mid-Range, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Right Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive), Two-Wheel Drive (Right Hand Drive)
View related parts
Ford Escape Valve - Inlet
Part Number: F6DZ-6507-A
$18.13 MSRP: $26.50
You Save: $8.37 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 7L8Z-6507-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2007 Ford Escape | 6 Cyl 3.0L DOHC EFI Modular | 4AT CD4E, 5-Speed Manual Transmission, 5-Speed Manual Transmission - AK, 6-Speed Automatic Transmission 6F Mid-Range, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Right Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive), Two-Wheel Drive (Right Hand Drive)
View related parts
Ford Escape Valve - Inlet
Part Number: 9S4Z-6507-B
$10.09 MSRP: $14.62
You Save: $4.53 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 9S4Z-6507-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2019 Ford Escape | 4 Cyl 2.5L Duratec (110kW/150PS), 4 Cyl 2.5L Duratec FFV (125kW/170PS) | 6-Speed Automatic Transmission 6F Mid-Range, Four-Wheel Drive, Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Front-Wheel Drive (Right Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive)
View related parts
Ford Escape VALVE - INLET
Part Number: P2GZ-6507-A
$8.32 MSRP: $11.85
You Save: $3.53 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Intake Valve, Valve
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023 Ford Escape | 3 Cyl 1.5 L GAS
View related parts
Ford Escape Inlet Valve
Part Number: HX7Z-6507-A
$12.40 MSRP: $17.67
You Save: $5.27 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Inlet; Intake Valve
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford Escape | 3 Cyl 1.5 L GAS
View related parts
Ford Escape VALVE - EXHAUST
Part Number: P2GZ-6505-A
$16.85 MSRP: $24.00
You Save: $7.15 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Exhaust Valve, Valve
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023 Ford Escape | 4 Cyl 2.0 L GAS

Ford Escape Intake Valve

Intake Valve in Ford Escape cars also has significant contribution towards improved and healthy performace of the vehicle's engine and correct burning of fuel. They are mainly concerned with the control of time at which the air and fuel mixture is admitted to the engine for maximum power production. Intake Valve can become faulty, thus leading to poor combustion and loss of power on the engine requiring replacement to solve this problem, and it is quite expensive. Different types of Intake Valves have been employed on Ford Escape in the course of time though each is developed to match particular characteristics. To replace a damaged Intake Valve the following steps are usually followed, and one has to apply tools like valve spring remover and compressor. Precise installation ensures that the engine is fabricated well and capable of performing its intended function hence the significance of Intake Valve to Ford Escape automobiles.

We provide a wide range of Ford Escape Intake Valve at the best prices possible. If you need Ford Escape Intake Valve, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Escape Intake Valve Parts Questions & Experts Answers

Valve - Inlet
AL8Z-6507-A
Q: How do you check and adjust valve clearances on Ford Escape?
A: For the 2.0L engine, start by unscrewing of the valve cover while positioning the number 1 cylinder on TDC on the compression stroke while the intake and exhaust cam lobes are facing upwards. The thickness of shims that fits tightly should be noted by measuring the clearance between the cam lobe base and the shim using feeler gauge for each valve. Turn the crankshaft again by 180 degrees clockwise to take the clearances for the cylinder No. 3, and also for the cylinder No. 4 and No. 2. If they are clearances are beyond the set range, some changes will be required. Because of the restricted installation space of the Camshafts and cylinder head special tools are used for adjustments. To change a shim, you need to lower the piston from TDC by merely turning the crankshaft roughly 90 degrees clockwise in order to prevent the bending of the valve. Refer to the manufacturer service tool to proceed and lower the cam follower while taking off the shim and measuring its thickness. In the vicinity of small clearance, use a thinner shim; at large clearance, use a thicker shim. Once you have adjusted the clearances on the first cylinder, turn the crankshaft two full turns in order to set all installed shims, bring the crankshaft back to TDC and check all the clearances once again adjusting them if necessary. As for the 2.3L/2.5L engines, the procedure to check the valve clearances is quite the same as with the 2.0L, but due to the use of hydraulic tappets and cam followers with heads of various thickness to obtain the required clearance, the camshafts have to be removed to change followers.