What are the removal and installation procedures for the oil pan in four cylinder engine on Ford Escape?

For 2008 and earlier models, begin by raising the vehicle and securely supporting it on jackstands, then drain the engine oil and clean the drain plug before reinstalling it with the proper torque. Remove and discard the oil filter, followed by the catalytic converter from the exhaust system. Unscrew the oil pan retaining bolts progressively, using a rubber mallet to loosen the seal, and carefully lower the oil pan, taking care not to damage the mating surfaces. Clean and degrease the mating surfaces of the lower engine block and oil pan, applying a 1/8-inch wide bead of sealant to the oil pan flange, ensuring it is positioned correctly. Install the oil pan bolts in a criss-cross pattern, tightening them sequentially, then lower the vehicle and allow the sealant to cure before refilling with oil and installing a new oil filter. For 2009 and later models, loosen the left front wheel lug nuts, raise the vehicle, and remove the left front wheel. Remove the throttle body air intake duct and drain the engine oil. Loosen the top two transaxle-to-engine mounting bolts, and for 4WD models, also loosen the corresponding bolts on the transfer case. Remove the splash shield and the bolts securing the oil pan to the transaxle, then slide the transaxle away from the engine. Remove the bolts securing the front cover to the oil pan and those attaching the oil pan to the engine block. If necessary, bump the oil pan with a block of wood to break it loose. Clean and degrease the mating surfaces, applying a bead of RTV sealant to the oil pan sealing surfaces. Install the oil pan and secure the front cover and engine block bolts finger tight, then tighten the front cover-to-oil pan bolts first, followed by the engine-to-oil pan bolts in a criss-cross pattern. Alternate tightening the transaxle mounting bolts until secure, then install the transaxle-to-oil pan bolts and tighten them. Reinstall the splash shield, tighten the remaining transaxle-to-engine bolts, and finally, install the air intake duct before filling the engine with new oil after ensuring the RTV sealant has cured.

Genuine Ford Escape Oil Pan

Oil Drain Pan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Oil Pans found

View related parts
Ford Escape Pan Assembly - Engine Oil
Part Number: 9L8Z-6675-A
$131.10 MSRP: $191.67
You Save: $60.57 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Assy - Engine Oil; Oil Pan
- Replaces: 6E5Z-6675-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2012 Ford Escape | 6 Cyl 3.0L OHC Duratec | 4AT CD4E, 5-Speed Manual Transmission - AK, 6-Speed Automatic Transmission 6F Mid-Range, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Escape Pan Assembly - Engine Oil
Part Number: DS7Z-6675-A
$107.97 MSRP: $196.67
You Save: $88.70 (46%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Assy - Engine Oil; Oil Pan
- Replaces: BM5Z-6675-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Escape | 4 Cyl 1.5L EcoBoost 16V (180PS), 4 Cyl 1.6L EcoBoost SCTi -Sigma | 6-Speed Automatic Transmission 6F Mid-Range, Four-Wheel Drive, Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Front-Wheel Drive (Right Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive)
View related parts
Ford Escape Pan Assembly - Engine Oil
Part Number: CJ5Z-6675-A
$166.44 MSRP: $243.33
You Save: $76.89 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Assy - Engine Oil
- Manufacturer Note: Use RTV Silicone Sealer In Place Of Gasket For This Application. Refer To Workshop Manual For Specification
- Replaced by: CJ5Z-6675-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Escape | 4 Cyl 2.0L, 4 Cyl 2.5L Duratec (110kW/150PS), 4 Cyl 2.5L Duratec FFV (125kW/170PS) | 6-Speed Automatic Transmission 6F Mid-Range, Four-Wheel Drive, Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Front-Wheel Drive (Right Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive)
View related parts
Ford Escape Pan Assembly - Engine Oil
Part Number: CJ5Z-6675-B
$166.44 MSRP: $243.33
You Save: $76.89 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Assy - Engine Oil
- Replaced by: CJ5Z-6675-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2019 Ford Escape | 4 Cyl 2.0L EcoBoost (240PS) | 6-Speed Automatic Transmission 6F Mid-Range, Four-Wheel Drive, Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Front-Wheel Drive (Right Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive)
View related parts
Ford Escape PAN Assembly - ENGINE OIL
Part Number: CJ5Z-6675-G
$187.03 MSRP: $243.33
You Save: $56.30 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Pan
- Replaces: BB5Z-6675-A, CJ5Z-6675-D, CJ5Z-6675-A, CJ5Z-6675-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2023 Ford Escape | 4 Cyl 2.0L, 4 Cyl 2.0L EcoBoost (240PS), 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5L Duratec (110kW/150PS), 4 Cyl 2.5L Duratec FFV (125kW/170PS) | 6-Speed Automatic Transmission 6F Mid-Range, Four-Wheel Drive, Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Front-Wheel Drive (Right Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive)
View related parts
Ford Escape Pan Assembly - Engine Oil
Part Number: BM5Z-6675-A
$107.97 MSRP: $196.67
You Save: $88.70 (46%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Assy - Engine Oil
- Manufacturer Note: Use RTV Silicone Sealer In Place Of Gasket For This Application. Refer To Workshop Manual For Specification
- Replaced by: DS7Z-6675-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013 Ford Escape | 4 Cyl 1.6L EcoBoost SCTi -Sigma | 6-Speed Automatic Transmission 6F Mid-Range, Four-Wheel Drive, Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Front-Wheel Drive (Right Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive)
View related parts
Ford Escape Pan Assembly - Engine Oil
Part Number: 5L8Z-6675-AA
$91.06 MSRP: $135.50
You Save: $44.44 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Assy - Engine Oil
- Replaced by: 8L8Z-6675-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Ford Escape | 6 Cyl 3.0L DOHC EFI Modular | 4AT CD4E, 5-Speed Manual Transmission, 5-Speed Manual Transmission - AK, 6-Speed Automatic Transmission 6F Mid-Range, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Right Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive), Two-Wheel Drive (Right Hand Drive)
View related parts
Ford Escape Pan Assembly - Engine Oil
Part Number: 7L8Z-6675-A
$91.06 MSRP: $135.50
You Save: $44.44 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Assy - Engine Oil
- Replaced by: 8L8Z-6675-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford Escape | 6 Cyl 3.0L DOHC EFI Modular | 4AT CD4E, 5-Speed Manual Transmission - AK, 6-Speed Automatic Transmission 6F Mid-Range, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Escape PAN ASY - ENGINE OIL
Part Number: K2GZ-6675-D
$107.96 MSRP: $157.83
You Save: $49.87 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Pan
- Replaces: K2GZ-6675-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford Escape | 4 Cyl 2.0 L GAS
View related parts
Ford Escape Pan Assembly - Engine Oil
Part Number: 9E5Z-6675-B
$117.42 MSRP: $171.67
You Save: $54.25 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Assy - Engine Oil; Oil Pan
- Replaces: 9E5Z-6675-A, 8E5Z-6675-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2012 Ford Escape | 4 Cyl 2.5L Duratec (110kW/150PS), 4 Cyl 2.5L PFI Gas/Electric | 4AT CD4E, 5-Speed Manual Transmission - AK, 6-Speed Automatic Transmission 6F Mid-Range, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Escape Pan Assembly - Engine Oil
Part Number: YS4Z-6675-AA
$79.00 MSRP: $115.50
You Save: $36.50 (32%)
ADD TO CART
Product Specifications
- Other Name: Pan Assy - Engine Oil; Oil Pan
- Manufacturer Note: Incl. 6730 plug
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2004 Ford Escape | 4 Cyl 2.0L Zetec EFI | 4AT CD4E, 5-Speed Manual Transmission, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Right Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive), Two-Wheel Drive (Right Hand Drive)
View related parts
Ford Escape PAN ASY - ENGINE OIL
Part Number: P2GZ-6675-A
$144.78 MSRP: $211.67
You Save: $66.89 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Pan
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023 Ford Escape | 4 Cyl 2.0 L GAS
View related parts
Ford Escape Engine Oil Pan Assembly
Part Number: JX6Z-6675-C
$59.17 MSRP: $86.50
You Save: $27.33 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Assembly - Engine Oil; Oil Pan
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford Escape | 3 Cyl 1.5 L GAS
View related parts
Ford Escape PAN ASY - ENGINE OIL
Part Number: PV4Z-6675-C
$30.30 MSRP: $43.17
You Save: $12.87 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Pan
- Replaces: PV4Z-6675-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2023 Ford Escape | 3 Cyl 1.5 L GAS
View related parts
Ford Escape Pan Assembly - Engine Oil
Part Number: 3M4Z-6675-AA
$103.40 MSRP: $151.17
You Save: $47.77 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Assy - Engine Oil; Oil Pan
- Manufacturer Note: Use RTV Silicone Sealer In Place Of Gasket For This Application. Refer To Workshop Manual For Specification
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2008 Ford Escape | 4 Cyl 2.3L, 4 Cyl 2.3L Hybrid Gas/Electric DOHC | 4AT CD4E, 5-Speed Manual Transmission, 5-Speed Manual Transmission - AK, 6-Speed Automatic Transmission 6F Mid-Range, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Right Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive), Two-Wheel Drive (Right Hand Drive)
View related parts
Ford Escape Pan Assembly - Engine Oil
Part Number: 8E5Z-6675-A
$117.42 MSRP: $171.67
You Save: $54.25 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Assy - Engine Oil
- Replaced by: 9E5Z-6675-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2010 Ford Escape | 4 Cyl 2.5L Duratec (110kW/150PS), 4 Cyl 2.5L PFI Gas/Electric | 4AT CD4E, 5-Speed Manual Transmission - AK, 6-Speed Automatic Transmission 6F Mid-Range, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Escape Pan Assembly - Engine Oil
Part Number: 9E5Z-6675-A
$117.42 MSRP: $171.67
You Save: $54.25 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Assy - Engine Oil
- Replaced by: 9E5Z-6675-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011 Ford Escape | 4 Cyl 2.5L Duratec (110kW/150PS), 4 Cyl 2.5L PFI Gas/Electric | 4AT CD4E, 5-Speed Manual Transmission - AK, 6-Speed Automatic Transmission 6F Mid-Range, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive

Ford Escape Oil Pan

The Oil Pan in Ford Escape vehicles is used to hold and store the engine oil in order to ensure that the mechanical part of the car engine is lubricated properly as well as cooled in the process. Incorporating the Wet Sump system, the Oil Pan has the capacity to collect oil that has been drawn by a pickup tube with the assistance of the oil pump in circulation of the oil in the engine before it is allowed to fall to the Oil Pan again. This has unique design that ensures that it provides the premier performance for the engine of the vehicle. Traditionally, the Ford Escape Oil Pan used stamped steel, however, in today's models, cast aluminum is mostly employed, thus increasing its useful and economical usefulness. The Oil Pan is designed to fit height of the engine in consideration to dynamic rocking container with oil, thus providing steady supply of oil.

We provide a wide range of Ford Escape Oil Pan at the best prices possible. If you need Ford Escape Oil Pan, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Escape Oil Pan Parts Questions & Experts Answers

Pan Assembly - Engine Oil
9L8Z-6675-A
Q: What are the removal and installation procedures for the oil pan in four cylinder engine on Ford Escape?
A: For 2008 and earlier models, begin by raising the vehicle and securely supporting it on jackstands, then drain the engine oil and clean the drain plug before reinstalling it with the proper torque. Remove and discard the oil filter, followed by the catalytic converter from the exhaust system. Unscrew the oil pan retaining bolts progressively, using a rubber mallet to loosen the seal, and carefully lower the oil pan, taking care not to damage the mating surfaces. Clean and degrease the mating surfaces of the lower engine block and oil pan, applying a 1/8-inch wide bead of sealant to the oil pan flange, ensuring it is positioned correctly. Install the oil pan bolts in a criss-cross pattern, tightening them sequentially, then lower the vehicle and allow the sealant to cure before refilling with oil and installing a new oil filter. For 2009 and later models, loosen the left front wheel lug nuts, raise the vehicle, and remove the left front wheel. Remove the throttle body air intake duct and drain the engine oil. Loosen the top two transaxle-to-engine mounting bolts, and for 4WD models, also loosen the corresponding bolts on the transfer case. Remove the splash shield and the bolts securing the oil pan to the transaxle, then slide the transaxle away from the engine. Remove the bolts securing the front cover to the oil pan and those attaching the oil pan to the engine block. If necessary, bump the oil pan with a block of wood to break it loose. Clean and degrease the mating surfaces, applying a bead of RTV sealant to the oil pan sealing surfaces. Install the oil pan and secure the front cover and engine block bolts finger tight, then tighten the front cover-to-oil pan bolts first, followed by the engine-to-oil pan bolts in a criss-cross pattern. Alternate tightening the transaxle mounting bolts until secure, then install the transaxle-to-oil pan bolts and tighten them. Reinstall the splash shield, tighten the remaining transaxle-to-engine bolts, and finally, install the air intake duct before filling the engine with new oil after ensuring the RTV sealant has cured.