How are balljoints replaced on Ford Excursion?

The balljoints are a press fit into the steering knuckle and need a special press tool and receiver cup to remove and reinstall. Since this tool is usually not within the possession of a home mechanic, it is best to take the car to the auto machine shop or to the any qualified auto repair shop for ball joint replacement. Further, on 1999 through 2003 2WD models, balljoints were not readily available for replacement at the time of preparing this page.

Genuine Ford Excursion Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Ball Joints found

View related parts
Ford Excursion Joint Assembly - Ball
Part Number: F6TZ-3050-FB
$57.66 MSRP: $110.36
You Save: $52.70 (48%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Joint Assy - Ball
- Position: Lower
- Replaced by: 8C3Z-3050-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Ford Excursion | 10 Cyl 6.8L, 8 Cyl 5.4L, 8 Cyl 6.0L, 8 Cyl 7.3L | 4AT 4R100, 5AT
View related parts
Ford Excursion Joint Assembly - Ball
Part Number: 5C3Z-3050-AB
$62.59 MSRP: $103.45
You Save: $40.86 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Joint Assy - Ball
- Manufacturer Note: Lower - (sealed design), 4X4
- Position: Lower
- Replaced by: BC3Z-3050-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Ford Excursion | 10 Cyl 6.8L, 8 Cyl 5.4L, 8 Cyl 6.0L, 8 Cyl 7.3L | 4AT 4R100, 5AT
View related parts
Ford Excursion Joint Assembly - Ball
Part Number: F5UZ-3049-A
$38.86 MSRP: $55.83
You Save: $16.97 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Assy - Ball
- Position: Upper
- Replaced by: 5C2Z-3049-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Ford Excursion | 10 Cyl 6.8L, 8 Cyl 5.4L, 8 Cyl 6.0L, 8 Cyl 7.3L | 4AT 4R100, 5AT
View related parts
Ford Excursion Joint Assembly - Ball
Part Number: F6TZ-3V050-DA
$36.77 MSRP: $50.24
You Save: $13.47 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: Lower, 4x2
- Position: Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Ford Excursion | 10 Cyl 6.8L, 8 Cyl 5.4L, 8 Cyl 6.0L, 8 Cyl 7.3L | 4AT 4R100, 5AT

Ford Excursion Ball Joint

The Ball Joint in Ford Excursion vehicles are critical component of the suspension and steering system that attaches the control arms to the steering knuckles. This subpart enables the free rotation of the part in several axis to cater for the vehicle handling, road condition and the input to the steering system. Made from steel, the Ford Excursion Ball Joint has a bearing stud and socket together with a rubber boot to guard the parts against dirt and to facilitate lubrication. Some of the Ford Excursion vehicles have loaded and unloaded ball joints whereby the loaded joints are subjected to pressure from the weight of the vehicle and the unloaded joints are only used to guide the vehicle into position without exertion of pressure on them. Eventually these ball joints show signs of wear and tear through use of the vehicle and lack of oiling, they can produce noise, and cause abnormal tire wear. Other alternatives are available ball joints, alignment ball joints performance ball joints for severe conditions allowing the Ford Excursion to have a good handling and stability.

We provide a wide range of Ford Excursion Ball Joint at the best prices possible. If you need Ford Excursion Ball Joint, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Excursion Ball Joint Parts Questions & Experts Answers

Joint Assembly - Ball
5C3Z-3050-AB
Q: How are balljoints replaced on Ford Excursion?
A: The balljoints are a press fit into the steering knuckle and need a special press tool and receiver cup to remove and reinstall. Since this tool is usually not within the possession of a home mechanic, it is best to take the car to the auto machine shop or to the any qualified auto repair shop for ball joint replacement. Further, on 1999 through 2003 2WD models, balljoints were not readily available for replacement at the time of preparing this page.