×
- Live Chat
- 1-888-788-9341
My Garage
My Account
Cart
Genuine Ford Explorer Fuel Pressure Regulator
Fuel Tank Pressure Regulator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Fuel Pressure Regulators found
Ford Explorer Fuel Pressure Regulator
The Ford Explorer Fuel Pressure Regulator is a part that controls the fuel pres sure that reaches the engine to avoid a wrong ratio of fuel and air mixture. This can be usually bolted on the fuel rail and has a spring and diaphragm that with the help of engine vacuum and the fuel return line keeps a pressure within a range. In periods of low requirement for the fuel, the fuel flows back to the tank but during a period of high fuel demand, the regulator ensures that the flow back to the tank is limited so as to attain the right pressure level. Various categories of fuel pressure regulator are on the market such as, adjustable regulators for high flow fuel system and bolt on performance fuel pressure regulators for peak tuning. These regulators are intended to work with every fuel system setup and tunings including injectors, fuel rails, crank vicinity, and larger injectors, as well as, forced induction. This part referred to as the Ford Explorer Fuel Pressure Regulator is very important in modulating the fuel pressure hence the correct air/fuel ratio and the overall efficiency of the car's engine.
We provide a wide range of Ford Explorer Fuel Pressure Regulator at the best prices possible. If you need Ford Explorer Fuel Pressure Regulator, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.
Ford Explorer Fuel Pressure Regulator Parts Questions & Experts Answers
- Q: How to remove and install a fuel pressure regulator on Ford Explorer?A: Relieve fuel system pressure. Disconnect battery cable. Remove upper Intake Manifold and detach passenger side Fuel Rail and injector assembly from lower intake manifold. Disconnect vacuum line from pressure regulator. Remove fuel return line and mounting bolts securing regulator to fuel rail. On 4.0L pushrod engines, remove fuel return line from top of regulator. On 5.0L engines, remove vacuum line and regulator mounting bolts. Remove regulator from fuel rail and discard O-ring and washer if equipped. Install new O-rings and washer, lubricate with oil. Reverse removal steps. Check fuel return line for kinks or wear, replace as needed.
