Should servicing of valves, valve seats, and valve guides be done by a professional on Ford Explorer?

Because of the intricacies of the job and the need to use specialized tools and equipment, that entailing reconditioning of the valves, valve seats, and valve guides known in the automobile world as valve job, should be done by a professional. A home mechanic should be capable of pulling the head, doing preliminary cleaning and wiping and then return the head to the car and deliver it to a dealer service department or an auto machine shop for the service. Performing the inspection enables identification of status of the head and valve train parts and the work as well as new parts required when dealing with an automotive machine shop. This will be done by the dealer service department or the automotive machine shop through reconditioning or replacement of the valves and valve seats, reconditioning and inspecting of the valve guides, replacing valves springs, spring retainers, rotators, and valve keepers as may be required, replacing the valve to seal with a new one and reassembly of the valved component with proper installed spring height. Also, the surface of the cylinder head gasket will be done some grinding if it has warped. Depending on professionalism of the valve job done, the head will then look as new as when it was bought. On its way back, it is necessary to clean the head once more before it is fitted onto the engine to remove any loose metal and abrasive dirt that was generated in the course of the valve grinding or in the process of surfacing the head, and to blow out all oil ways and passages with air pressure, if available, but always wearing safety goggles when using air pressure.

Genuine Ford Explorer Intake Valve

Engine Intake Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Intake Valves found

View related parts
Ford Explorer Valve - Inlet
Part Number: 2L2Z-6507-AA
$62.95 MSRP: $114.67
You Save: $51.72 (46%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Intake Valve
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2010 Ford Explorer | 6 Cyl 4.0L SOHC EFI | 5-Speed Automatic Transmission 5R55S, 5-Speed Automatic Transmission 5R55W, 5-Speed Manual Transmission (M5R4), 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission 6R60, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Right Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Explorer Valve - Inlet
Part Number: 7T4Z-6507-B
$12.65 MSRP: $18.50
You Save: $5.85 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Intake Valve
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2023 Ford Explorer | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5L Cyclone Petrol TIVCT, 6 Cyl 3.7L DOHC | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Explorer Valve - Inlet
Part Number: AA5Z-6507-A
$6.95 MSRP: $10.07
You Save: $3.12 (31%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Intake Valve
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Explorer | 6 Cyl 3.5L DOHC T/C | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Explorer Valve - Inlet
Part Number: 3L3Z-6507-BA
$8.44 MSRP: $12.02
You Save: $3.58 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Intake Valve, Valve
- Manufacturer Note: INSERT, VLV ST INTK
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2010 Ford Explorer | 8 Cyl 4.6L | 5-Speed Automatic Transmission 5R55S, 5-Speed Automatic Transmission 5R55W, 5-Speed Manual Transmission (M5R4), 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission 6R60, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Right Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Explorer Valve - Inlet
Part Number: 1S7Z-6507-B
$12.29 MSRP: $17.50
You Save: $5.21 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Intake Valve
- Manufacturer Note: Intake
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2023 Ford Explorer | 4 Cyl 2.0L EcoBoost (240PS), 4 Cyl 2.3 L GAS, 4 Cyl 2.3L TIVCT DI TC | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Explorer Valve - Inlet
Part Number: XL3Z-6507-AA
$38.80 MSRP: $70.67
You Save: $31.87 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Intake Valve, Valve
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2005 Ford Explorer | 8 Cyl 4.6L Romeo SOHC EFI | 5-Speed Automatic Transmission 5R55S, 5-Speed Automatic Transmission 5R55W, 5-Speed Manual Transmission (M5R4), 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission 6R60, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Right Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Explorer Valve - Inlet
Part Number: 2L2Z-6507-BA
$18.02 MSRP: $32.83
You Save: $14.81 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Intake Valve
- Replaces: F87Z-6507-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2010 Ford Explorer | 6 Cyl 4.0L, 6 Cyl 4.0L SOHC EFI | 4AT 4R70W, 5-Speed Automatic Transmission 5R55S, 5-Speed Automatic Transmission 5R55W, 5-Speed Manual Transmission (M5R4), 5AT 5R55E, 5MT, 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission 6R60, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Right Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Explorer Valve - Inlet
Part Number: E3ZZ-6507-A
$13.73 MSRP: $18.75
You Save: $5.02 (27%)
ADD TO CART
Product Specifications
- Other Name: Intake Valve, Valve
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-2001 Ford Explorer | 8 Cyl 5.0L | 4AT 4R55E, 4AT 4R70W, 5AT 5R55E, 5MT
View related parts
Ford Explorer Valve - Inlet
Part Number: F87Z-6507-BA
$18.02 MSRP: $32.83
You Save: $14.81 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: Std., SOHC
- Replaced by: 2L2Z-6507-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2001 Ford Explorer | 6 Cyl 4.0L | 4AT 4R70W, 5AT 5R55E, 5MT
View related parts
Ford Explorer VALVE - INLET
Part Number: JT4Z-6507-B
$7.83 MSRP: $11.15
You Save: $3.32 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Intake Valve
- Replaced by: JT4Z-6507-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | 6 Cyl 3.0 L GAS
View related parts
Ford Explorer Valve - Inlet
Part Number: F3TZ-6507-B
Product Specifications
- Other Name: Valve
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-2001 Ford Explorer | 8 Cyl 5.0L | 4AT 4R55E, 4AT 4R70W, 5AT 5R55E, 5MT
View related parts
Ford Explorer Valve - Inlet
Part Number: F4TZ-6507-AB
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-2001 Ford Explorer | 8 Cyl 5.0L | 4AT 4R55E, 4AT 4R70W, 5AT 5R55E, 5MT
View related parts
Ford Explorer Valve Inlet
Part Number: F4TZ6507BB
Product Specifications
- Other Name: Valve - Inlet
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-2001 Ford Explorer | 8 Cyl 5.0L | 4AT 4R55E, 4AT 4R70W, 5AT 5R55E, 5MT
View related parts
Ford Explorer Valve - Inlet
Part Number: F77Z-6507-AA
Product Specifications
- Other Name: Intake Valve
- Manufacturer Note: Standard, OHV
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2001 Ford Explorer | 6 Cyl 4.0L | 4AT 4R70W, 5AT 5R55E, 5MT
View related parts
Ford Explorer Valve - Inlet
Part Number: FOTZ-6507-A
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1991-1997 Ford Explorer | 6 Cyl 4.0L | 4AT 4R44E, 4AT 4R55E, 4AT 4R70W, 4AT A4LD, 4AT AODE-E, 4AT AODE-W, 5AT 5R55E, 5MT
View related parts
Ford Explorer Valve Inlet
Part Number: FOTZ6507B
Product Specifications
- Other Name: Valve - Inlet
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1991-2000 Ford Explorer | 6 Cyl 4.0L | 4AT 4R44E, 4AT 4R55E, 4AT 4R70W, 4AT A4LD, 4AT AODE-E, 4AT AODE-W, 5AT 5R55E, 5MT

Ford Explorer Intake Valve

Being one of the components of the Ford Explorer car's fuel system, the Intake Valve is responsible for controlling airflow and the mixture of the subsequent air-fuel detonation, which increases the efficiency in engine performance. These valves must open and close at certain intervals so as to provide for the correct mixtures and combustion to occur, failure to do so means poor combustion and thus, less power generated by the engine. There have been several types of Intake Valves used in different generations of Ford Explorers where the differences were mostly on the mere design and material which influences the durability and workability. It is advisable to change the Intake Valve as soon as is feasible if damaged since it leads to expensive expenditures if not rectified and in extreme cases even an engine breakdown. Replacement of the new Intake Valve requires tools and a number of appropriate steps to facilitate correct functioning of the new valve in the chain of operations of the engine system.

We provide a wide range of Ford Explorer Intake Valve at the best prices possible. If you need Ford Explorer Intake Valve, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Explorer Intake Valve Parts Questions & Experts Answers

Valve - Inlet
FOTZ-6507-A
Q: Should servicing of valves, valve seats, and valve guides be done by a professional on Ford Explorer?
A: Because of the intricacies of the job and the need to use specialized tools and equipment, that entailing reconditioning of the valves, valve seats, and valve guides known in the automobile world as valve job, should be done by a professional. A home mechanic should be capable of pulling the head, doing preliminary cleaning and wiping and then return the head to the car and deliver it to a dealer service department or an auto machine shop for the service. Performing the inspection enables identification of status of the head and valve train parts and the work as well as new parts required when dealing with an automotive machine shop. This will be done by the dealer service department or the automotive machine shop through reconditioning or replacement of the valves and valve seats, reconditioning and inspecting of the valve guides, replacing valves springs, spring retainers, rotators, and valve keepers as may be required, replacing the valve to seal with a new one and reassembly of the valved component with proper installed spring height. Also, the surface of the cylinder head gasket will be done some grinding if it has warped. Depending on professionalism of the valve job done, the head will then look as new as when it was bought. On its way back, it is necessary to clean the head once more before it is fitted onto the engine to remove any loose metal and abrasive dirt that was generated in the course of the valve grinding or in the process of surfacing the head, and to blow out all oil ways and passages with air pressure, if available, but always wearing safety goggles when using air pressure.