How to change engine oil and oil filter and ensuring proper maintenance on Ford Explorer?

Engine oils degrade with use and become dilute; hence it is desirable to change them frequently and that this is an effective method of preventive maintenance. In this business, you ought to make sure you have a set of all instruments vital for the project and many rags in anticipation of a stain. Start with engine at normal operating temperature; this produces better flow of oils and sludges. After warming the vehicle turn off the engine, find a level and flat ground and take off the oil filler cap. The oil drain plug and filter is more easily accessible if the vehicle is on a hoist or jack stands; always avoid working under a vehicle that is only on a jack. Carry the jack under the engine in the manner to avoid the hot exhaust parts and find the drain plug and the oil filter. Place a drain pan underneath the plug, clear the area, and when removing the plug take keen on hot oil. When the oil has been drained, look into the oil for metallic debris, and check the drain plug for deposits, clean it and bolt it tightly back in its position. After that, place the drain pan beneath the oil filter, and using a filter wrench, remove this unit; in case the filter is quite tight, it is possible to use a metal bar for its turning. When already opened, twist and remove the cap while in an angle to avoid spilling of the contents. While putting on the filter, remove all the old gasket from the mounting surface on the block and examine the used filter to the new one. Apply a little engine oil on the gasket of the new filter then fit it into position and tighten it in the right manner. When all the tools and materials are taken out, lower down the vehicle and put in fresh oil through the filler cap with the help of a funnel and put in four quarts and pouring the dipstick. Cranks the engine and check for drips at the drain plug and filter and if there are some then using the spanner tighten them. Check the oil level again after some few minutes and add more if the quantity is low. The first few times when you are on the road after a modification, your primary observations should be the leakage and the level of oil. Last but not the least collect and dispose off the used oil that cannot be reclaimed by pouring it into container for possible disposal.

Genuine Ford Explorer Oil Filter

Engine Oil filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Oil Filters found

View related parts
Ford Explorer Filter Assembly - Oil
Part Number: AA5Z-6714-A
$6.16 MSRP: $11.80
You Save: $5.64 (48%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Oil Filter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2023 Ford Explorer | 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5L Cyclone Petrol TIVCT, 6 Cyl 3.5L DOHC T/C, 6 Cyl 3.7L DOHC | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Explorer Filter Assembly - Oil
Part Number: F1AZ-6731-BD
$13.73
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Oil Filter
- Replaces: F1AZ-6731-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-2010 Ford Explorer | 6 Cyl 4.0L SOHC EFI, 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI, 8 Cyl 5.0L | 4AT 4R55E, 4AT 4R70W, 5-Speed Automatic Transmission 5R55S, 5-Speed Automatic Transmission 5R55W, 5-Speed Manual Transmission (M5R4), 5AT 5R55E, 5MT, 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission 6R60, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Right Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Explorer Filter Assembly - Oil
Part Number: D9AZ-6731-A
$8.78 MSRP: $16.82
You Save: $8.04 (48%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Oil Filter
- Replaces: E7TZ-6731-A, FL-1-HP
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1991-2001 Ford Explorer | 6 Cyl 4.0L | 4AT 4R44E, 4AT 4R55E, 4AT 4R70W, 4AT A4LD, 4AT AODE-E, 4AT AODE-W, 5AT 5R55E, 5MT
View related parts
Ford Explorer Kit - Element & Gasket - Oil Filter
Part Number: BE8Z-6731-AB
$7.40 MSRP: $11.80
You Save: $4.40 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Oil Filter
- Manufacturer Note: Alternative Part
- Replaces: 1S7Z-6731-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2023 Ford Explorer | 4 Cyl 2.0L EcoBoost (240PS), 4 Cyl 2.3 L GAS, 4 Cyl 2.3L TIVCT DI TC | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Explorer COVER
Part Number: FT4Z-6A832-C
$41.36 MSRP: $83.56
You Save: $42.20 (51%)
ADD TO CART
Product Specifications
- Other Name: Filter Assembly, Oil Filter, Oil Filter Housing
- Replaces: FT4Z-6A832-B, FT4Z-6A832-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | 6 Cyl 3.0 L GAS
View related parts
Ford Explorer Filter Assembly
Part Number: 6M8Z-6731-AA
$9.22 MSRP: $17.51
You Save: $8.29 (48%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter Assy
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2015 Ford Explorer | 4 Cyl 2.0L EcoBoost (240PS) | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Explorer Kit - Element & Gasket - Oil Filter
Part Number: KU2Z-6731-A
$9.34 MSRP: $16.82
You Save: $7.48 (45%)
ADD TO CART
Product Specifications
- Other Name: Filter Element, Oil Filter
- Replaces: FL-2062, FT4Z-6731-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | 6 Cyl 3.0 L GAS
View related parts
Ford Explorer Filter Assembly - Oil
Part Number: F1AZ-6731-A
$7.40 MSRP: $11.80
You Save: $4.40 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: FILTER ASY - OIL
- Manufacturer Note: 24V
- Replaced by: F1AZ-6731-BD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1997 Ford Explorer | 8 Cyl 5.0L | 4AT 4R55E, 4AT 4R70W, 5AT 5R55E, 5MT
View related parts
Ford Explorer Filter Assembly
Part Number: JT4Z-6C683-A
$1.26 MSRP: $2.40
You Save: $1.14 (48%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: FILTER ASY; Filter
- Manufacturer Note: Particulate Filter Outlet
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

Ford Explorer Oil Filter

There is a specific component in Ford Explorer vehicles referred to as the Oil Filter with a vital role of helping maintain good health of the automobile engine through purging the engine oil through the elimination of undesirable characteristics. It works through the removal of contaminants and retention of dirt while allowing the oil to pass through hence providing adequate protection against wear and formation of sludge. There are certain models of Ford Explorer that have incorporated both replaceable element cartridge filters and the typical spin-on filters that incorporate a metal canister that is well capable of withstanding high pressures of oil as well as involving vibrations in the engine. With time, the Ford Explorer oil filters have enhanced features such as the anti-drain backs, and bypass valves this enables the initialization of the supply of oil in the engine when on. There are also performance-oriented filters available with regard to increased filtration and mechanical stability necessary for contemporary high-stress engines. Summing up, the Ford Explorer oil filter is crucial to longevity and optimal performance of the car's engine.

We provide a wide range of Ford Explorer Oil Filter at the best prices possible. If you need Ford Explorer Oil Filter, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Explorer Oil Filter Parts Questions & Experts Answers

Filter Assembly - Oil
F1AZ-6731-A
Q: How to change engine oil and oil filter and ensuring proper maintenance on Ford Explorer?
A: Engine oils degrade with use and become dilute; hence it is desirable to change them frequently and that this is an effective method of preventive maintenance. In this business, you ought to make sure you have a set of all instruments vital for the project and many rags in anticipation of a stain. Start with engine at normal operating temperature; this produces better flow of oils and sludges. After warming the vehicle turn off the engine, find a level and flat ground and take off the oil filler cap. The oil drain plug and filter is more easily accessible if the vehicle is on a hoist or jack stands; always avoid working under a vehicle that is only on a jack. Carry the jack under the engine in the manner to avoid the hot exhaust parts and find the drain plug and the oil filter. Place a drain pan underneath the plug, clear the area, and when removing the plug take keen on hot oil. When the oil has been drained, look into the oil for metallic debris, and check the drain plug for deposits, clean it and bolt it tightly back in its position. After that, place the drain pan beneath the oil filter, and using a filter wrench, remove this unit; in case the filter is quite tight, it is possible to use a metal bar for its turning. When already opened, twist and remove the cap while in an angle to avoid spilling of the contents. While putting on the filter, remove all the old gasket from the mounting surface on the block and examine the used filter to the new one. Apply a little engine oil on the gasket of the new filter then fit it into position and tighten it in the right manner. When all the tools and materials are taken out, lower down the vehicle and put in fresh oil through the filler cap with the help of a funnel and put in four quarts and pouring the dipstick. Cranks the engine and check for drips at the drain plug and filter and if there are some then using the spanner tighten them. Check the oil level again after some few minutes and add more if the quantity is low. The first few times when you are on the road after a modification, your primary observations should be the leakage and the level of oil. Last but not the least collect and dispose off the used oil that cannot be reclaimed by pouring it into container for possible disposal.