How to remove and install a blower motor in a Ford F-250?

Remove the power cable connected to the negative pole of the battery. The wirings or harness connectors should be taken out from the fan motor. You have to unscrew it and take it out. Take off the wheel of air. Remove the clamp and washer from the motor shaft. Slide off the blower wheel. This is how you can do it in reverse installation for you.

Genuine Ford F-250 Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Blower Motors found

View related parts
Ford F-250 Motor - Cooling Blower
Part Number: F2TZ-18527-A
$63.58 MSRP: $105.09
You Save: $41.51 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blower Motor
- Replaces: E7TZ-18527-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1987-1997 Ford F-250 | 6 Cyl 4.9L, 8 Cyl 4.6L, 8 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L, 8 Cyl 6.9L, 8 Cyl 7.3L, 8 Cyl 7.5L | 3AT C6, 3MT, 4AT 4R70W, 4AT AOD, 4AT E4OD, 4MT, 5MT
View related parts
Ford F-250 Motor - Cooling Blower
Part Number: F85Z-19805-CA
$52.34 MSRP: $104.00
You Save: $51.66 (50%)
ADD TO CART
Product Specifications
- Replaced by: XL7Z-19805-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-1999 Ford F-250 | 8 Cyl 4.6L, 8 Cyl 5.4L | 4AT 4R100, 4AT 4R70W, 5MT
View related parts
Ford F-250 Motor Assembly
Part Number: E2TZ-18527-A
Product Specifications
- Other Name: Motor Assy; Blower Motor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1982-1986 Ford F-250 | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L, 8 Cyl 6.6L, 8 Cyl 6.9L, 8 Cyl 7.5L | 3AT C6, 3MT, 4AT AOD, 4MT
View related parts
Ford F-250 Motor Assembly
Part Number: E3PZ-18527-A
Product Specifications
- Other Name: Motor Assy; Blower Motor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1980-1981 Ford F-250 | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L, 8 Cyl 6.6L | 3AT C6, 3MT, 4AT AOD, 4MT
View related parts
Ford F-250 Blower Assembly
Part Number: XL3Z-18456-BA
Product Specifications
- Other Name: Blower Assy
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999 Ford F-250 | 8 Cyl 4.6L, 8 Cyl 5.4L | 4AT 4R100, 4AT 4R70W, 5MT

Ford F-250 Blower Motor

Blower Motor is a part of Ford F-250 cars' air conditioning system, its operation concerns the air supply inside the car cabin. Due to the control of the flow rate of the Air conditioning using the Blower Motor, it only takes a few minutes to be able to appropriate the interior temperature of the car depending on the weather condition. Normally connected to a control module by wires, the Blower Motor controls are in an easy reach and enable easy control of the heat and air conditioning options. Nevertheless, if there is a problem with the electronic module and or wiring, then there can be some malfunctions experienced, which in this case would be a loss of control of the climate of the car's interior. Blower Motor controls should hence be replaced immediately they are seen to be faulty to maximize on the efficient working of the heating and air conditioning system on the Ford F-250 vehicles.

We provide a wide range of Ford F-250 Blower Motor at the best prices possible. If you need Ford F-250 Blower Motor, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford F-250 Blower Motor Parts Questions & Experts Answers

Motor - Cooling Blower
F2TZ-18527-A
Q: How to remove and install a blower motor in a Ford F-250?
A: Remove the power cable connected to the negative pole of the battery. The wirings or harness connectors should be taken out from the fan motor. You have to unscrew it and take it out. Take off the wheel of air. Remove the clamp and washer from the motor shaft. Slide off the blower wheel. This is how you can do it in reverse installation for you.