How to remove and install a power brake booster on Ford F-250?

The power brake booster needs only regular checks of the vacuum hose and case. If issues arise, replace the unit as dismantling requires special tools. To remove, detach the master cylinder from the booster, disconnect the vacuum hose from the check valve, and remove the brake light switch and booster pushrod from the brake pedal arm. Unbolt the booster from the firewall and lift it out. To install, reverse these steps, ensuring the pushrod length is correct. If not, adjust it. Reinstall the master cylinder and test the brakes before driving.

Genuine Ford F-250 Brake Booster

Brake Power Booster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Boosters found

View related parts
Ford F-250 Booster Assembly - Brake
Part Number: F5TZ-2005-CA
$0.00
Product Specifications
- Other Name: Booster Assy - Brake; Brake Booster
- Replaces: E8TZ-2005-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1987-1997 Ford F-250 | 6 Cyl 4.9L, 8 Cyl 4.6L, 8 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L, 8 Cyl 6.9L, 8 Cyl 7.3L, 8 Cyl 7.5L | 3AT C6, 3MT, 4AT 4R70W, 4AT AOD, 4AT E4OD, 4MT, 5MT
View related parts
Ford F-250 Booster Assembly - Brake
Part Number: E8TZ-2005-A
$0.00
Product Specifications
- Other Name: BOOSTER ASY - BRAKE
- Replaced by: F5TZ-2005-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1987-1992 Ford F-250 | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L, 8 Cyl 6.9L, 8 Cyl 7.3L, 8 Cyl 7.5L | 3AT C6, 3MT, 4AT AOD, 4AT E4OD, 4MT, 5MT
View related parts
Ford F-250 Booster Assembly - Brake
Part Number: F4TZ-2005-A
Product Specifications
- Other Name: Booster Assy - Brake; Brake Booster
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1988-1992 Ford F-250 | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L, 8 Cyl 7.3L, 8 Cyl 7.5L | 3AT C6, 3MT, 4AT AOD, 4AT E4OD, 4MT, 5MT

Ford F-250 Brake Booster

The Ford F-250 Brake Booster is an important part that assists in lightening the pressure that a driver applies when using the brakes. There are two main types of boosters used in F-250 vehicles: Two types of boosters are vacuum boosters and hydraulic boosters. Vacuum boosters apply engine vacuum and pressures around it to increases braking force while, hydraulic boosters apply fluid pressures to the same effect. These boosters are normally dependable, but sometimes it breaks and must be replaced. For the Ford F-250, original product options are power brake boosters which may be original models for this car or universal which can come with single or dual diaphragm and are available in different diameters and finishes depending on the place available for them in the engine room.

We provide a wide range of Ford F-250 Brake Booster at the best prices possible. If you need Ford F-250 Brake Booster, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford F-250 Brake Booster Parts Questions & Experts Answers

Booster Assembly - Brake
F5TZ-2005-CA
Q: How to remove and install a power brake booster on Ford F-250?
A: The power brake booster needs only regular checks of the vacuum hose and case. If issues arise, replace the unit as dismantling requires special tools. To remove, detach the master cylinder from the booster, disconnect the vacuum hose from the check valve, and remove the Brake Light Switch and booster pushrod from the brake pedal arm. Unbolt the booster from the firewall and lift it out. To install, reverse these steps, ensuring the pushrod length is correct. If not, adjust it. Reinstall the master cylinder and test the brakes before driving.