How do you replace a door handle and lock cylinder on Ford F-250?

To change the door handle you have to pull out the inner door trim panel and the watershield that is mounted on the door from inside. Remove the latch actuator rod from the door handle assembly; then, using a socket and a small ratchet, get rid of the nut and screw which holds the door handle assembly. Remove the door handle assembly with its pads if used. If adjusting the handle, transfer the pads and the actuator rod clip on to the new assembly. Similarly, removal is done in reverse order, hence testing the handle assembly before reassembling by fixing the watershield and the panel. For the lock cylinder, with the window up, remove the inner door trim panel and the watershield. Remove the lock actuating rod from the cylinder, and the retaining received then the lock cylinder can be slid out from the outer perimeter of the door. This is accomplished in reverse and some caution is used to make certain that the watershield is fitted tightly without being marred in any way; this is because a watertight fit is necessary to prevent the seepage of water and consequent rusting; it is likely that reinstitution of the lip of the seal might require re-gluing with contact cement.

Genuine Ford F-250 Door Handle

Inside Door Handle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

43 Door Handles found

View related parts
Ford F-250 Handle
Part Number: E8TZ-9943400-A
$39.37 MSRP: $48.90
You Save: $9.53 (20%)
ADD TO CART
Product Specifications
- Other Name: Outside Handle
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1988-1997 Ford F-250 | 6 Cyl 4.9L, 8 Cyl 4.6L, 8 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L, 8 Cyl 7.3L, 8 Cyl 7.5L | 3AT C6, 3MT, 4AT 4R70W, 4AT AOD, 4AT E4OD, 4MT, 5MT
View related parts
Ford F-250 Handle Assy - Door - Inner
Part Number: E7TZ-1522601-A
$11.08 MSRP: $15.78
You Save: $4.70 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Inside Handle
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1987-1997 Ford F-250 | 6 Cyl 4.9L, 8 Cyl 4.6L, 8 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L, 8 Cyl 6.9L, 8 Cyl 7.3L, 8 Cyl 7.5L | 3AT C6, 3MT, 4AT 4R70W, 4AT AOD, 4AT E4OD, 4MT, 5MT
View related parts
Ford F-250 Handle Assy - Door - Inner
Part Number: E7TZ-1522600-A
$13.73 MSRP: $15.22
You Save: $1.49 (10%)
ADD TO CART
Product Specifications
- Other Name: Inside Handle
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1987-1997 Ford F-250 | 6 Cyl 4.9L, 8 Cyl 4.6L, 8 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L, 8 Cyl 6.9L, 8 Cyl 7.3L, 8 Cyl 7.5L | 3AT C6, 3MT, 4AT 4R70W, 4AT AOD, 4AT E4OD, 4MT, 5MT
View related parts
Ford F-250 Handle Assy - Door - Inner
Part Number: F65Z-1522601-AA
$7.31 MSRP: $10.15
You Save: $2.84 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Inside Handle
- Manufacturer Note: L.H., U/8500 GVW
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1998 Ford F-250 | 8 Cyl 4.6L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L | 4AT 4R100, 4AT 4R70W, 4AT E4OD, 5MT
View related parts
Ford F-250 Handle
Part Number: F85Z-9943400-AAA
$13.73 MSRP: $19.53
You Save: $5.80 (30%)
ADD TO CART
Product Specifications
- Replaced by: 1L3Z-9943400-BAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-1999 Ford F-250 | 8 Cyl 4.6L, 8 Cyl 5.4L | 4AT 4R100, 4AT 4R70W, 5MT
View related parts
Ford F-250 Handle Door Pull
Part Number: F75Z1522666AAA
$24.41 MSRP: $33.91
You Save: $9.50 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle - Door Pull; Pull Handle
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1998 Ford F-250 | 8 Cyl 4.6L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L | 4AT 4R100, 4AT 4R70W, 4AT E4OD, 5MT
View related parts
Ford F-250 Handle Assy - Door - Outer
Part Number: F65Z-1522405-AAF
$24.62 MSRP: $34.21
You Save: $9.59 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1998 Ford F-250 | 8 Cyl 4.6L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L | 4AT 4R100, 4AT 4R70W, 4AT E4OD, 5MT
View related parts
Ford F-250 Handle Assy - Door - Outer
Part Number: F65Z-1522405-AAC
$79.80 MSRP: $110.86
You Save: $31.06 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1999 Ford F-250 | 8 Cyl 4.6L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L | 4AT 4R100, 4AT 4R70W, 4AT E4OD, 5MT
View related parts
Ford F-250 Handle Door Pull
Part Number: F75Z1522666AAD
$19.78 MSRP: $27.47
You Save: $7.69 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle - Door Pull
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1998 Ford F-250 | 8 Cyl 4.6L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L | 4AT 4R100, 4AT 4R70W, 4AT E4OD, 5MT
View related parts
Ford F-250 Handle Assy - Door - Outer
Part Number: E7TZ-1522404-A
Product Specifications
- Other Name: Handle, Outside Handle
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1980-1997 Ford F-250 | 6 Cyl 4.9L, 8 Cyl 4.6L, 8 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L, 8 Cyl 6.6L, 8 Cyl 6.9L, 8 Cyl 7.3L, 8 Cyl 7.5L | 3AT C6, 3MT, 4AT 4R70W, 4AT AOD, 4AT E4OD, 4MT, 5MT
View related parts
Ford F-250 Handle Assy - Door - Outer
Part Number: F65Z-1522404-AAH
Product Specifications
- Position: Passenger Side
- Replaced by: YL3Z-1522404-BAH
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1999 Ford F-250 | 8 Cyl 4.6L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L | 4AT 4R100, 4AT 4R70W, 4AT E4OD, 5MT
View related parts
Ford F-250 Handle Assy - Door - Outer
Part Number: XL3Z-1522404-AAC
Product Specifications
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999 Ford F-250 | 8 Cyl 4.6L, 8 Cyl 5.4L | 4AT 4R100, 4AT 4R70W, 5MT
View related parts
Ford F-250 Handle - Latch
Part Number: E5TZ-9943400-B
Product Specifications
- Other Name: Handle
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1980-1986 Ford F-250 | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L, 8 Cyl 6.6L, 8 Cyl 6.9L, 8 Cyl 7.5L | 3AT C6, 3MT, 4AT AOD, 4MT
View related parts
Ford F-250 Handle Assy - Door - Outer
Part Number: E7TZ-1522405-A
Product Specifications
- Other Name: Handle, Outside Handle
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1980-1997 Ford F-250 | 6 Cyl 4.9L, 8 Cyl 4.6L, 8 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L, 8 Cyl 6.6L, 8 Cyl 6.9L, 8 Cyl 7.3L, 8 Cyl 7.5L | 3AT C6, 3MT, 4AT 4R70W, 4AT AOD, 4AT E4OD, 4MT, 5MT
View related parts
Ford F-250 Handle Assy - Door - Outer
Part Number: F65Z-1522404-AAB
Product Specifications
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1999 Ford F-250 | 8 Cyl 4.6L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L | 4AT 4R100, 4AT 4R70W, 4AT E4OD, 5MT
View related parts
Ford F-250 Handle Assy - Door - Outer
Part Number: F65Z-1522404-AAC
Product Specifications
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1999 Ford F-250 | 8 Cyl 4.6L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L | 4AT 4R100, 4AT 4R70W, 4AT E4OD, 5MT
View related parts
Ford F-250 Handle Assy - Door - Outer
Part Number: F65Z-1522404-AAE
Product Specifications
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1998 Ford F-250 | 8 Cyl 4.6L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L | 4AT 4R100, 4AT 4R70W, 4AT E4OD, 5MT
View related parts
Ford F-250 Handle Assembly Door Outer
Part Number: F65Z1522404AAF
Product Specifications
- Other Name: Handle Assy - Door - Outer
- Position: Outer
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1998 Ford F-250 | 8 Cyl 4.6L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L | 4AT 4R100, 4AT 4R70W, 4AT E4OD, 5MT
View related parts
Ford F-250 Handle Assy - Door - Outer
Part Number: F65Z-1522404-AAG
Product Specifications
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1999 Ford F-250 | 8 Cyl 4.6L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L | 4AT 4R100, 4AT 4R70W, 4AT E4OD, 5MT
View related parts
Ford F-250 Handle Assy - Door - Outer
Part Number: F65Z-1522404-AAJ
Product Specifications
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1999 Ford F-250 | 8 Cyl 4.6L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L | 4AT 4R100, 4AT 4R70W, 4AT E4OD, 5MT

| Page 1 of 3 |Next >

1-20 of 43 Results

Ford F-250 Door Handle

The Ford F-250 RIP Interior Door Handle is very useful to the occupants of the vehicle especially through facilitating their evacuation out of the car. This small lever works in the similar fashion to undo the door hook from the latch which works like the exterior knob for unlocking the door from outside. Periodically, the Ford F-250 Interior Door Handle may fade and chip especially the driver side handle because it is frequently used and as such may not look as attractive as before. Different types of Interior Door Handles have been used on the Ford F-250 model of vehicles and the major difference has been witnessed in the design and the kind of durability offered. Regardless of the specific type, the main goal remains consistent: to ensure the user gets a secure way of accessing the inside of the car's cabin. Sometimes when there is a problem such as a faulty door latch assembly if it affects the proper functioning of the Interior Door Handle it can prove to be a nuisance.

We provide a wide range of Ford F-250 Door Handle at the best prices possible. If you need Ford F-250 Door Handle, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford F-250 Door Handle Parts Questions & Experts Answers

Handle Assy - Door - Outer
E7TZ-1522404-A
Q: How do you replace a door handle and lock cylinder on Ford F-250?
A: To change the door handle you have to pull out the inner door trim panel and the watershield that is mounted on the door from inside. Remove the latch actuator rod from the door handle assembly; then, using a socket and a small ratchet, get rid of the nut and screw which holds the door handle assembly. Remove the door handle assembly with its pads if used. If adjusting the handle, transfer the pads and the actuator rod clip on to the new assembly. Similarly, removal is done in reverse order, hence testing the handle assembly before reassembling by fixing the watershield and the panel. For the lock cylinder, with the window up, remove the inner door trim panel and the watershield. Remove the lock actuating rod from the cylinder, and the retaining received then the lock cylinder can be slid out from the outer perimeter of the door. This is accomplished in reverse and some caution is used to make certain that the watershield is fitted tightly without being marred in any way; this is because a watertight fit is necessary to prevent the seepage of water and consequent rusting; it is likely that reinstitution of the lip of the seal might require re-gluing with contact cement.