How do you remove and install the hood on Ford Focus?

To take off the hood, it is needed to open it and keep it at this position with the help of the stay. Remove the negative battery terminal, and free the wires from the jets at the bottom, as well as removing them from female clips at the hood. Further remove the windshield washer wiring connector at the bottom of the jets, and make sure that it is unclipped from the hood. To facilitate the adjustment of the hood during the installation, draw the outline of the hinges; thereafter, remove the two hinge retaining bolts on each side. In this case, with the aid of an assistant, one is supposed to turn the four bolts counterclockwise to make way and set free the stay, and in the end, raise the hood off the car. For installation, reverse the removal procedure and it should be noted that the hood hinges should be placed inside the outlined marks for an equal space between the hood and the wall. To change the front height raise or lower the lock and rotate the soft pad on the front cross panel of the engine compartment up or down for support to the hood.

Genuine Ford Focus Hood

Engine Hood

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Hoods found

View related parts
Ford Focus Hood Assembly - Less Hinges
Part Number: F1EZ-16612-A
$538.48 MSRP: $801.32
You Save: $262.84 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Assy - Less Hinges; Hood
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2018 Ford Focus | 3 Cyl 1.0L EcoBoost 120PS/125PS/140PS, 4 Cyl 2.0L DI TIVCT Petrol, 4 Cyl 2.0L EcoBoost (240PS) , 4 Cyl 2.3L Ecoboost, Electric Motor | 1-Speed Transmission, 5-Speed Manual Transmission - B5/IB5, 5-Speed Manual Transmission - MTX75, 6-Speed Automatic Transmission 6DCT450 - MPS6, 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F15, 6-Speed Automatic Transmission DPS6, 6-Speed Manual Transaxle - MMT6, 6-Speed Manual Transmission - B6, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Front-Wheel Drive (Right Hand Drive), Left Hand Drive, RHD 4WD (FTD)
View related parts
Ford Focus Hood Assembly - Less Hinges
Part Number: 4S4Z-16612-AB
$234.03 MSRP: $495.92
You Save: $261.89 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Assy - Less Hinges; Hood
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Focus | 4 Cyl 2.0L Duratec HE, 4 Cyl 2.3L | 4-Speed Automatic Transaxle - 4F27E, 5-Speed Manual Transmission - MTX75, Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Focus Hood Assembly - Less Hinges
Part Number: CP9Z-16612-B
$560.68 MSRP: $834.35
You Save: $273.67 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Assy - Less Hinges; Hood
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2018 Ford Focus | 3 Cyl 1.0L EcoBoost 120PS/125PS/140PS, 4 Cyl 2.0L DI TIVCT Petrol, 4 Cyl 2.0L EcoBoost (240PS) , Electric Motor | 1-Speed Transmission, 5-Speed Manual Transmission - MTX75, 6-Speed Automatic Transmission 6F15, 6-Speed Automatic Transmission DPS6, 6-Speed Manual Transaxle - MMT6, 6-Speed Manual Transmission - B6, Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Focus Hood Assembly
Part Number: 8S4Z-16612-A
$304.21 MSRP: $448.68
You Save: $144.47 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Assy; Hood
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Ford Focus | 4 Cyl 2.0L Duratec HE | 4-Speed Automatic Transaxle - 4F27E, 5-Speed Manual Transmission - MTX75, Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Focus Hood Assembly - Less Hinges
Part Number: YS4Z-16612-SA
Product Specifications
- Other Name: Hood Assy - Less Hinges; Hood
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2004 Ford Focus | 4 Cyl 2.0L, 4 Cyl 2.0L CVH EFI, 4 Cyl 2.0L Zetec EFI, 4 Cyl 2.0L Zetec VVT, 4 Cyl 2.3L | 4AT 4F27E, 4-Speed Automatic Transaxle - 4F27E, 5MT, 5-Speed Manual Transmission - B5/IB5, 5-Speed Manual Transmission - MTX75, 6MT, 6-Speed Manual Transmission, Front-Wheel Drive (Left Hand Drive), Left Hand Drive

Ford Focus Hood

We provide a wide range of Ford Focus Hood at the best prices possible. If you need Ford Focus Hood, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Focus Hood Parts Questions & Experts Answers

Hood Assembly - Less Hinges
4S4Z-16612-AB
Q: How do you remove and install the hood on Ford Focus?
A: To take off the hood, it is needed to open it and keep it at this position with the help of the stay. Remove the negative battery terminal, and free the wires from the jets at the bottom, as well as removing them from female clips at the hood. Further remove the windshield washer wiring connector at the bottom of the jets, and make sure that it is unclipped from the hood. To facilitate the adjustment of the hood during the installation, draw the outline of the hinges; thereafter, remove the two hinge retaining bolts on each side. In this case, with the aid of an assistant, one is supposed to turn the four bolts counterclockwise to make way and set free the stay, and in the end, raise the hood off the car. For installation, reverse the removal procedure and it should be noted that the hood hinges should be placed inside the outlined marks for an equal space between the hood and the wall. To change the front height raise or lower the lock and rotate the soft pad on the front cross panel of the engine compartment up or down for support to the hood.