How to regular checks of the Shock Absorber,Wheel Bearing and CV Boot on Ford Focus?

Regular checks of the steering linkage and suspension components are crucial for vehicle performance and safety. Park on level ground, turn off the engine, set the parking brake, and check tire pressures. Assess struts by pushing down on each corner of the vehicle and observing if it returns to a level position within one or two bounces. Look for fluid leakage on shock struts and replace both if leakage is present. Inspect the secure mounting and integrity of struts and upper mounts. Visually inspect front suspension and steering components for damage, leaks, and worn seals, boots, and fittings. Check balljoint-to-steering knuckle joint for movement and replace balljoints if play is detected. Test for play in the steering system components by pushing and pulling on the front tires. Address loose steering gear mounts or worn tie-rod ends. Assess front wheel bearings for play or unusual noise when rotating the tires and replace if necessary. Keep CV Boot clean and inspect for damage. Check for grease around the boot area and push on the surface to reveal hidden cracks. Replace damaged CV Boot to prevent CV joint damage.

Genuine Ford Focus Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Wheel Bearings found

View related parts
Ford Focus Kit - Wheel Bearing Repair
Part Number: YS4Z-1A049-AA
$112.04 MSRP: $115.00
You Save: $2.96 (3%)
ADD TO CART
Product Specifications
- Replaced by: 98AZ-1A049-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2008 Ford Focus | 4 Cyl 2.0L, 4 Cyl 2.0L CVH EFI, 4 Cyl 2.0L Duratec HE, 4 Cyl 2.0L Zetec EFI, 4 Cyl 2.0L Zetec VVT, 4 Cyl 2.3L | 4AT 4F27E, 4-Speed Automatic Transaxle - 4F27E, 5MT, 5-Speed Manual Transmission - B5/IB5, 5-Speed Manual Transmission - MTX75, 6MT, 6-Speed Manual Transmission, Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Focus Bearing Assembly - Wheel Hub
Part Number: 9S4Z-1244-A
$35.45 MSRP: $48.44
You Save: $12.99 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assy - Wheel Hub; Wheel Bearing
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Ford Focus | 4 Cyl 2.0L Duratec HE | 4-Speed Automatic Transaxle - 4F27E, 5-Speed Manual Transmission - MTX75, Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Focus Bearing Assembly - Wheel Hub
Part Number: 6S4Z-1215-B
$49.82 MSRP: $79.45
You Save: $29.63 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assy - Wheel Hub; Wheel Bearing
- Manufacturer Note: Includes ABS Tone Ring Not Serviced Separately
- Replaces: YS4Z-1215-AA, YS4Z-1215-BA, YS4Z-1215-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2011 Ford Focus | 4 Cyl 2.0L, 4 Cyl 2.0L CVH EFI, 4 Cyl 2.0L Duratec HE, 4 Cyl 2.0L Zetec EFI, 4 Cyl 2.0L Zetec VVT, 4 Cyl 2.3L | 4-Speed Automatic Transaxle - 4F27E, 4AT 4F27E, 5-Speed Manual Transmission - B5/IB5, 5-Speed Manual Transmission - MTX75, 5MT, 6-Speed Manual Transmission, 6MT, Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Focus Bearing Assembly - Wheel Hub
Part Number: YS4Z-1215-BA
$49.82 MSRP: $79.45
You Save: $29.63 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assy - Wheel Hub
- Manufacturer Note: Front (ABS sensing occurs within the bearing, no ring required), with ABS
- Replaced by: 6S4Z-1215-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2003 Ford Focus | 4 Cyl 2.0L, 4 Cyl 2.3L | 4AT 4F27E, 5MT, 6MT
View related parts
Ford Focus Bearing Assembly - Wheel
Part Number: YS4Z-1215-AA
$49.82 MSRP: $79.45
You Save: $29.63 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assy - Wheel Hub
- Manufacturer Note: Front, without ABS
- Position: Front
- Replaced by: 6S4Z-1215-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Ford Focus | 4 Cyl 2.0L, 4 Cyl 2.0L CVH EFI, 4 Cyl 2.0L Duratec HE, 4 Cyl 2.0L Zetec EFI, 4 Cyl 2.0L Zetec VVT, 4 Cyl 2.3L | 4AT 4F27E, 4-Speed Automatic Transaxle - 4F27E, 5MT, 5-Speed Manual Transmission - B5/IB5, 5-Speed Manual Transmission - MTX75, 6MT, 6-Speed Manual Transmission, Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Focus Bearing Assembly - Wheel
Part Number: YS4Z-1215-BB
$49.82 MSRP: $79.45
You Save: $29.63 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assy - Wheel Hub
- Replaced by: 6S4Z-1215-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford Focus | 4 Cyl 2.0L CVH EFI, 4 Cyl 2.0L Duratec HE, 4 Cyl 2.0L Zetec EFI, 4 Cyl 2.0L Zetec VVT, 4 Cyl 2.3L | 4-Speed Automatic Transaxle - 4F27E, 5-Speed Manual Transmission - B5/IB5, 5-Speed Manual Transmission - MTX75, 6-Speed Manual Transmission, Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Focus Bearing Assembly - Wheel Hub
Part Number: CV6Z-1215-A
Product Specifications
- Other Name: Bearing Assy - Wheel Hub
- Position: Passenger Side/Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2018 Ford Focus | 3 Cyl 1.0L EcoBoost 120PS/125PS/140PS, 4 Cyl 2.0L DI TIVCT Petrol, 4 Cyl 2.0L EcoBoost (240PS) , Electric Motor | 1-Speed Transmission, 5-Speed Manual Transmission - MTX75, 6-Speed Automatic Transmission 6F15, 6-Speed Automatic Transmission DPS6, 6-Speed Manual Transaxle - MMT6, 6-Speed Manual Transmission - B6, Front-Wheel Drive (Left Hand Drive), Left Hand Drive

Ford Focus Wheel Bearing

The Wheel Bearing in Ford Focus protects the stability of vehicles and helps it to drive safely and smoothly because it lets the wheels rotate with less friction. The most typical design in the newer models is the unit or integrated hub and bearing assembly that may incorporate an ABS sensor and is dismantled and replaced en masse. Some models of the front-wheel-drive Focus may need the steering knuckle being unbolted in order to get it serviced while non-driven-axle hubs contained replaceable tapered-roller thrust bearings. Vibration on the vehicle can be attributed to worn or loose wheel bearings, and hence wheel bearing needs regular inspection. In the case of replaceable tapered roller bearings some interference, cleaning and visual examination is required for proper evaluation. High quality grease is then applied in maintaining the bearings and proper setting of the end play on the bearings to achieve manufacturer recommended setting of the Ford Focus's Wheel Bearing system.

We provide a wide range of Ford Focus Wheel Bearing at the best prices possible. If you need Ford Focus Wheel Bearing, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Focus Wheel Bearing Parts Questions & Experts Answers

Bearing Assembly - Wheel Hub
YS4Z-1215-BA
Q: How to regular checks of the Shock Absorber,Wheel Bearing and CV Boot on Ford Focus?
A: Regular checks of the steering linkage and suspension components are crucial for vehicle performance and safety. Park on level ground, turn off the engine, set the parking brake, and check tire pressures. Assess struts by pushing down on each corner of the vehicle and observing if it returns to a level position within one or two bounces. Look for fluid leakage on shock struts and replace both if leakage is present. Inspect the secure mounting and integrity of struts and upper mounts. Visually inspect front suspension and steering components for damage, leaks, and worn seals, boots, and fittings. Check balljoint-to-steering knuckle joint for movement and replace balljoints if play is detected. Test for play in the steering system components by pushing and pulling on the front tires. Address loose steering gear mounts or worn tie-rod ends. Assess front wheel bearings for play or unusual noise when rotating the tires and replace if necessary. Keep CV Boot clean and inspect for damage. Check for grease around the boot area and push on the surface to reveal hidden cracks. Replace damaged CV Boot to prevent CV joint damage.