How to remove and install the release cylinder on Ford Mustang?

To remove the clip, disconnect the hydraulic line at the transmission while having a small can and rags handy, as some fluid will spill during the removal. Plug the line to prevent excessive fluid loss and contamination. Next, remove the transmission, followed by the clutch slave cylinder mounting bolts, and then take out the clutch slave cylinder from the front of the transmission. For installation, lightly lubricate the transmission input shaft housing with multi-purpose grease, then install the clutch slave cylinder onto the input shaft housing of the transmission and tighten the bolts to the specified torque. After that, install the transmission, connect the hydraulic line fitting to the transmission, and install the clip. Finally, check the fluid level in the brake fluid reservoir, adding brake fluid that conforms to DOT 3 specifications until the level is correct, then bleed the system and recheck the brake fluid level.

Genuine Ford Mustang Clutch Slave Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Clutch Slave Cylinders found

View related parts
Ford Mustang Cylinder Assembly - Clutch Slave
Part Number: BR3Z-7A508-B
$192.66 MSRP: $281.67
You Save: $89.01 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Cylinder Assy - Clutch Slave; Slave Cylinder
- Replaces: BR3Z-7A508-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2017 Ford Mustang | 8 Cyl 5.0L DOHC EFI Modular, 8 Cyl 5.0L MOD DOHC SEFI NA | 6-Speed Manual Transmission (T56), 6-Speed Manual Transmission-3160, 6-Speed Manual Transmission-MT82, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Mustang Cylinder Assembly - Clutch Slave
Part Number: 4R3Z-7A508-AA
$167.58 MSRP: $245.00
You Save: $77.42 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Cylinder Assy - Clutch Slave; Hydraulic Line, Slave Cylinder
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2019 Ford Mustang | 6 Cyl 3.7L PFI NA, 6 Cyl 4.0L SOHC EFI, 8 Cyl 4.6L SOHC EFI, 8 Cyl 5.4L DOHC EFI S/C ALUM, 8 Cyl 5.8L DOHC SC | 5-Speed Manual Transmission T5OD, 5-Speed Manual Transmission TR3650, 6-Speed Manual Transmission (T56), 6-Speed Manual Transmission-3160, 6-Speed Manual Transmission-MT82, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Mustang Cylinder Assembly - Clutch Slave
Part Number: FR3Z-7A508-B
$121.98 MSRP: $178.33
You Save: $56.35 (32%)
ADD TO CART
Product Specifications
- Other Name: Cylinder Assy - Clutch Slave; Slave Cylinder
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2023 Ford Mustang | 4 Cyl 2.3 L GAS, 4 Cyl 2.3L TIVCT DI TC | 6-Speed Manual Transmission-3160, 6-Speed Manual Transmission-MT82, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Mustang Cylinder Assembly - Clutch Slave
Part Number: DR3Z-7A508-A
$190.38 MSRP: $278.33
You Save: $87.95 (32%)
ADD TO CART
Product Specifications
- Other Name: Cylinder Assy - Clutch Slave; Slave Cylinder
- Replaces: AR3Z-7A508-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2014 Ford Mustang | 8 Cyl 4.6L SOHC EFI, 8 Cyl 5.4L DOHC EFI S/C ALUM, 8 Cyl 5.8L DOHC SC | 5-Speed Manual Transmission T5OD, 5-Speed Manual Transmission TR3650, 6-Speed Automatic Transmission (6R80), 6-Speed Manual Transmission (T56), 6-Speed Manual Transmission-MT82, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Mustang Cylinder Assembly - Clutch Slave
Part Number: JR3Z-7A508-A
$143.64 MSRP: $210.00
You Save: $66.36 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: CYLINDER ASY - CLUTCH SLAVE; Slave Cylinder
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2023 Ford Mustang | 8 Cyl 5.0 L GAS, 8 Cyl 5.0L DOHC EFI Modular, 8 Cyl 5.0L MOD DOHC SEFI NA | 6-Speed Manual Transmission-3160, 6-Speed Manual Transmission-MT82, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Mustang Cylinder Assembly - Clutc
Part Number: BR3Z-7A508-A
$192.66 MSRP: $281.67
You Save: $89.01 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Cylinder Assy - Clutch Slave
- Replaced by: BR3Z-7A508-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2014 Ford Mustang | 8 Cyl 5.0L DOHC EFI Modular, 8 Cyl 5.0L MOD DOHC SEFI NA | 6-Speed Manual Transmission (T56), 6-Speed Manual Transmission-MT82, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Mustang Cylinder Assy - Clutch Slave
Part Number: AR3Z-7A508-A
$190.38 MSRP: $278.33
You Save: $87.95 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: DR3Z-7A508-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2013 Ford Mustang | 8 Cyl 5.4L DOHC EFI S/C ALUM | 5-Speed Manual Transmission T5OD, 5-Speed Manual Transmission TR3650, 6-Speed Manual Transmission (T56), 6-Speed Manual Transmission-MT82, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Mustang Cylinder Assembly - Clutch Slave
Part Number: FR3Z-7A508-A
$216.96 MSRP: $320.00
You Save: $103.04 (33%)
ADD TO CART
Product Specifications
- Other Name: Cylinder Assy - Clutch Slave; Slave Cylinder
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2020 Ford Mustang | 8 Cyl 5.2 L GAS, 8 Cyl 5.2L | 6-Speed Manual Transmission-3160, 6-Speed Manual Transmission-MT82, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)

Ford Mustang Clutch Slave Cylinder

Clutch Slave Cylinder is employed in Ford Mustang vehicles so as to function in tandem with the clutch master cylinder to disengage the clutch when the pedal is pressed, for the manual transmission. This hydraulic device translates the force exerted by the driver into hydraulic pressure, by moving a rod that in turns pushes on a lever or a fork which makes it easier to shift the gears safely. A number of Clutch Slave Cylinder designs have been used in Ford Mustang cars through the years with the primary concern being the hydraulic type to enhance performance and durability. Malfunction in clutch slave cylinder cause problem in gear shifting and sometimes damage to transmission system hence require timely repair and maintain in order to make Ford Mustang drive.

We provide a wide range of Ford Mustang Clutch Slave Cylinder at the best prices possible. If you need Ford Mustang Clutch Slave Cylinder, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Mustang Clutch Slave Cylinder Parts Questions & Experts Answers

Cylinder Assembly - Clutch Slave
4R3Z-7A508-AA
Q: How to remove and install the release cylinder on Ford Mustang?
A: To remove the clip, disconnect the hydraulic line at the transmission while having a small can and rags handy, as some fluid will spill during the removal. Plug the line to prevent excessive fluid loss and contamination. Next, remove the transmission, followed by the clutch slave cylinder mounting bolts, and then take out the clutch slave cylinder from the front of the transmission. For installation, lightly lubricate the transmission input shaft housing with multi-purpose grease, then install the clutch slave cylinder onto the input shaft housing of the transmission and tighten the bolts to the specified torque. After that, install the transmission, connect the hydraulic line fitting to the transmission, and install the clip. Finally, check the fluid level in the brake fluid reservoir, adding brake fluid that conforms to DOT 3 specifications until the level is correct, then bleed the system and recheck the brake fluid level.

Related Ford Mustang Parts

Browse by Year