Q: How to remove and install a steering gear and control arm on Ford Mustang?
A: Loosen lug nuts, raise the vehicle, and place on jackstands. Remove the wheel and steering knuckle pinch bolt. Separate the knuckle from the balljoint and control arm. Remove steering gear fasteners and pivot bolt, being careful not to damage the boot. Remove rear fasteners, control arm, and rear bracket. To install, reverse the process, ensuring all fasteners are tightened to torque. Lug nuts should also be tightened to torque. Rear fasteners can be reversed for easier installation. Check and adjust front wheel alignment if needed.