How to inspect and replace battery cables on 2000-2011 Ford Ranger?

Periodically inspect the entire length of each battery cable for damage, cracked or burned insulation and corrosion. Poor battery cable connections can cause starting problems and decreased engine performance. Check the cable-to-terminal connections at the ends of the cables for cracks, loose wire strands and corrosion. The presence of white, fluffy deposits under the insulation at the cable terminal connection is a sign that the cable is corroded and should be replaced. Check the terminals for distortion, missing mounting bolts and corrosion. When replacing the cables, always disconnect the negative cable first and hook it up last or the battery may be shorted by the tool used to loosen the cable clamps. Even if only the positive cable is being replaced, be sure to disconnect the negative cable from the battery first. Disconnect and remove the cable. Make sure the replacement cable is the same length and wire size (diameter). Clean the threads of the starter relay or ground connection with a wire brush to remove rust and corrosion. Apply a light coat of petroleum jelly to the threads to prevent future corrosion. Attach the cable to the starter relay or ground connection and tighten the mounting nut/bolt securely. Before connecting the new cable to the battery, make sure that it reaches the battery post without having to be stretched. Clean the battery posts and cable ends thoroughly and apply a light coat of petroleum jelly to prevent corrosion. Connect the positive cable first, followed by the negative cable.

How to inspect and replace battery cables on 1993-2011 Ford Ranger?

Periodically inspect the entire length of each battery cable for damage, cracked or burned insulation and corrosion. Poor battery cable connections can cause starting problems and decreased engine performance. Check the cable-to-terminal connections at the ends of the cables for cracks, loose wire strands and corrosion. The presence of white, nutty deposits under the insulation at the cable terminal connection is a sign that the cable is corroded and should be replaced. Check the terminals for distortion, missing mounting bolts and corrosion. When replacing the cables, always disconnect the negative cable first and hook it up last or the battery may be shorted by the tool used to loosen the cable clamps. Even if only the positive cable is being replaced, be sure to disconnect the negative cable from the battery first. Disconnect and remove the cable. Make sure the replacement cable is the same length and wire size (diameter). Clean the threads of the starter relay or ground connection with a wire brush to remove rust and corrosion. Apply a light coat of petroleum jelly to the threads to prevent future corrosion. Attach the cable to the starter relay or ground connection and tighten the mounting nut/bolt securely. Before connecting the new cable to the battery, make sure that it reaches the battery post without having to be stretched. Clean the battery posts and cable ends thoroughly and apply a light coat of petroleum jelly to prevent corrosion. Connect the positive cable first, followed by the negative cable.

Genuine Ford Ranger Battery Cable

Car Battery Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

114 Battery Cables found

View related parts
Ford Ranger Cable Assembly
Part Number: XL5Z14301PA
$21.84 MSRP: $29.84
You Save: $8.00 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assy
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2003 Ford Ranger | 4 Cyl 2.3L, 4 Cyl 2.5L, 6 Cyl 3.0L, 6 Cyl 4.0L | 4AT 4R44E, 5AT 5R44E, 5AT 5R55E, 5MT
View related parts
Ford Ranger Cable Assembly
Part Number: 2L5Z-14300-AA
$32.11 MSRP: $43.88
You Save: $11.77 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assy
- Manufacturer Note: Complete asy, includes positive & negative battery cables, alternator & starter motor cables, without A/C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2003 Ford Ranger | 6 Cyl 3.0L | 5AT 5R44E, 5AT 5R55E, 5MT
View related parts
Ford Ranger Cable Assembly
Part Number: F8YZ-14301-FA
$107.07 MSRP: $146.30
You Save: $39.23 (27%)
ADD TO CART
Product Specifications
- Other Name: Cable Assy
- Manufacturer Note: electric Ranger
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2003 Ford Ranger | 4 Cyl 2.3L, 4 Cyl 2.5L, 6 Cyl 3.0L, 6 Cyl 4.0L | 4AT 4R44E, 5AT 5R44E, 5AT 5R55E, 5MT
View related parts
Ford Ranger CABLE ASY - BATTERY TO BATTERY
Part Number: KB3Z-14300-A
$248.60 MSRP: $400.00
You Save: $151.40 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Positive Cable
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | 4 Cyl 2.3 L GAS, 4 Cyl 2.3L TIVCT DI TC | 10-Speed Automatic Transmission (10R80), 2 Whl L/H Rear Drive-High Ride, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive
View related parts
Ford Ranger WIRING ASY - ALTERNATOR
Part Number: KB3Z-14305-A
$94.05 MSRP: $137.50
You Save: $43.45 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wire Harness
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | 4 Cyl 2.3 L GAS, 4 Cyl 2.3L TIVCT DI TC | 10-Speed Automatic Transmission (10R80), 2 Whl L/H Rear Drive-High Ride, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive
View related parts
Ford Ranger Cable Assembly
Part Number: AL5Z-14300-A
$68.93 MSRP: $145.09
You Save: $76.16 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assy
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Ford Ranger | 4 Cyl 2.3L NA Petrol | 5-Speed Automatic Transmission - 5R44E/5R55E, 5-Speed Manual Transmission - R1HD, 5-Speed Manual Transmission M5R1, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Ranger CABLE ASY
Part Number: KB3Z-14301-A
$50.34 MSRP: $78.91
You Save: $28.57 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Negative Cable
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | 4 Cyl 2.3 L GAS, 4 Cyl 2.3L TIVCT DI TC | 10-Speed Automatic Transmission (10R80), 2 Whl L/H Rear Drive-High Ride, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive
View related parts
Ford Ranger Battery-Cable
Part Number: 9L5Z-14300-A
$83.04 MSRP: $115.36
You Save: $32.32 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assy; Cable Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Ford Ranger | 6 Cyl 4.0L SOHC EFI | 5-Speed Automatic Transmission - 5R44E/5R55E, 5-Speed Manual Transmission - R1HD, 5-Speed Manual Transmission M5R1, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Ranger Cable Assembly
Part Number: F8YZ14301AA
$48.30 MSRP: $67.10
You Save: $18.80 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assy
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2003 Ford Ranger | 4 Cyl 2.3L, 4 Cyl 2.5L, 6 Cyl 3.0L, 6 Cyl 4.0L | 4AT 4R44E, 5AT 5R44E, 5AT 5R55E, 5MT
View related parts
Ford Ranger Cable Assembly Battery Negat
Part Number: XL5Z14301CB
$141.96 MSRP: $197.21
You Save: $55.25 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assy
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2003 Ford Ranger | 4 Cyl 2.3L, 4 Cyl 2.5L, 6 Cyl 3.0L, 6 Cyl 4.0L | 4AT 4R44E, 5AT 5R44E, 5AT 5R55E, 5MT
View related parts
Ford Ranger Cable Assembly
Part Number: AL5Z-14300-D
$56.51 MSRP: $138.36
You Save: $81.85 (60%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assy
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Ford Ranger | 6 Cyl 4.0L SOHC EFI | 5-Speed Automatic Transmission - 5R44E/5R55E, 5-Speed Manual Transmission - R1HD, 5-Speed Manual Transmission M5R1, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Ranger CABLE ASY - BATTERY TO BATTERY
Part Number: KB3Z-14300-B
$267.81 MSRP: $430.91
You Save: $163.10 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Positive Cable
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Ranger | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Battery Cable
Part Number: E9TZ14301C
$44.35 MSRP: $61.61
You Save: $17.26 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assy
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1983-1989 Ford Ranger | 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.3L, 6 Cyl 2.8L, 6 Cyl 2.9L | 3AT C3, 3AT C5, 4AT A4LD, 4MT, 5MT
View related parts
Ford Ranger Battery Cable Accessory/Battery Cable Harness
Part Number: 1L5Z-14300-KA
Product Specifications
- Other Name: Cable Assy
- Manufacturer Note: Complete asy, includes positive & negative battery cables and A/C, alternator & starter motor cables, with and without A/C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2003 Ford Ranger | 6 Cyl 4.0L | 4AT 4R44E, 5AT 5R44E, 5AT 5R55E, 5MT
View related parts
Ford Ranger Cable Assembly
Part Number: 1L5Z14300CA
Product Specifications
- Other Name: Cable Assy
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001 Ford Ranger | 4 Cyl 2.5L | 4AT 4R44E, 5AT 5R44E, 5AT 5R55E, 5MT
View related parts
Ford Ranger Cable Assembly
Part Number: 1L5Z-14300-EA
Product Specifications
- Other Name: Cable Assy
- Manufacturer Note: Complete assembly - inclueds positive & negative battery cables, alternator & starter motor cables, without A/C, BEFORE 11/28/2001
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2002 Ford Ranger | 4 Cyl 2.3L | 4AT 4R44E, 5AT 5R44E, 5AT 5R55E, 5MT
View related parts
Ford Ranger Cable Assembly Battery To B
Part Number: 1L5Z14300EAA
Product Specifications
- Other Name: Cable Assy - Battery To Battery
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2003 Ford Ranger | 4 Cyl 2.3L, 4 Cyl 2.5L, 6 Cyl 3.0L, 6 Cyl 4.0L | 4AT 4R44E, 5AT 5R44E, 5AT 5R55E, 5MT
View related parts
Ford Ranger Cable Assembly
Part Number: 1L5Z-14300-FA
Product Specifications
- Other Name: Cable Assy
- Manufacturer Note: Complete asy, includes positive & negative battery cables and A/C, alternator & starter motor cables, with A/C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2003 Ford Ranger | 4 Cyl 2.3L | 4AT 4R44E, 5AT 5R44E, 5AT 5R55E, 5MT
View related parts
Ford Ranger Cable Assembly
Part Number: 1L5Z14300GA
Product Specifications
- Other Name: Cable Assy
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001 Ford Ranger | 6 Cyl 3.0L | 4AT 4R44E, 5AT 5R44E, 5AT 5R55E, 5MT
View related parts
Ford Ranger Cable Assembly
Part Number: 1L5Z-14300-HA
Product Specifications
- Other Name: Cable Assy
- Manufacturer Note: Complete asy, includes positive & negative battery cables and A/C, alternator & starter motor cables, with A/C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001 Ford Ranger | 6 Cyl 3.0L | 4AT 4R44E, 5AT 5R44E, 5AT 5R55E, 5MT

| Page 1 of 6 |Next >

1-20 of 114 Results

Ford Ranger Battery Cable

Battery Cable are part and parcel of Ford Rangers that play a critical role of transmitting electrical current from battery towards the necessary electric equipment of the vehicle such as the starter for igniting the engine. Such cables lose their efficiency as the motor ages, low copper conductivity of rubber covered cables, or owing to corroded terminals resulting in starting problems. For proper working of the vehicles, it becomes necessary to check on and replace the battery cables that might have worn out or damaged with better quality ones. Hence, by keeping a large range of different yet superior battery cables and components.

We provide a wide range of Ford Ranger Battery Cable at the best prices possible. If you need Ford Ranger Battery Cable, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Ranger Battery Cable Parts Questions & Experts Answers

Cable Assembly
2L5Z-14300-BA
Q: How to inspect and replace battery cables on 2000-2011 Ford Ranger?
A: Periodically inspect the entire length of each battery cable for damage, cracked or burned insulation and corrosion. Poor battery cable connections can cause starting problems and decreased engine performance. Check the cable-to-terminal connections at the ends of the cables for cracks, loose wire strands and corrosion. The presence of white, fluffy deposits under the insulation at the cable terminal connection is a sign that the cable is corroded and should be replaced. Check the terminals for distortion, missing mounting bolts and corrosion. When replacing the cables, always disconnect the negative cable first and hook it up last or the battery may be shorted by the tool used to loosen the cable clamps. Even if only the positive cable is being replaced, be sure to disconnect the negative cable from the battery first. Disconnect and remove the cable. Make sure the replacement cable is the same length and wire size (diameter). Clean the threads of the starter relay or ground connection with a wire brush to remove rust and corrosion. Apply a light coat of petroleum jelly to the threads to prevent future corrosion. Attach the cable to the starter relay or ground connection and tighten the mounting nut/bolt securely. Before connecting the new cable to the battery, make sure that it reaches the battery post without having to be stretched. Clean the battery posts and cable ends thoroughly and apply a light coat of petroleum jelly to prevent corrosion. Connect the positive cable first, followed by the negative cable.
Battery To Starter Motor Cable
F37Z-14300-C
Q: How to inspect and replace battery cables on 1993-2011 Ford Ranger?
A: Periodically inspect the entire length of each battery cable for damage, cracked or burned insulation and corrosion. Poor battery cable connections can cause starting problems and decreased engine performance. Check the cable-to-terminal connections at the ends of the cables for cracks, loose wire strands and corrosion. The presence of white, nutty deposits under the insulation at the cable terminal connection is a sign that the cable is corroded and should be replaced. Check the terminals for distortion, missing mounting bolts and corrosion. When replacing the cables, always disconnect the negative cable first and hook it up last or the battery may be shorted by the tool used to loosen the cable clamps. Even if only the positive cable is being replaced, be sure to disconnect the negative cable from the battery first. Disconnect and remove the cable. Make sure the replacement cable is the same length and wire size (diameter). Clean the threads of the starter relay or ground connection with a wire brush to remove rust and corrosion. Apply a light coat of petroleum jelly to the threads to prevent future corrosion. Attach the cable to the starter relay or ground connection and tighten the mounting nut/bolt securely. Before connecting the new cable to the battery, make sure that it reaches the battery post without having to be stretched. Clean the battery posts and cable ends thoroughly and apply a light coat of petroleum jelly to prevent corrosion. Connect the positive cable first, followed by the negative cable.

Genuine Ford Ranger Battery Cable

114 Battery Cables found

Ford Ranger Cable Assembly

Ford Ranger Cable Assembly

Ford Ranger Cable Assembly

Ford Ranger CABLE ASY - BATTERY TO BATTERY

Ford Ranger WIRING ASY - ALTERNATOR

Ford Ranger Cable Assembly

Ford Ranger CABLE ASY

Ford Ranger Battery-Cable

Ford Ranger Cable Assembly

Ford Ranger Cable Assembly Battery Negat

Ford Ranger Cable Assembly

Ford Ranger CABLE ASY - BATTERY TO BATTERY

Ford Ranger Battery Cable

Ford Ranger Battery Cable Accessory/Battery Cable Harness

Ford Ranger Cable Assembly

Ford Ranger Cable Assembly

Ford Ranger Cable Assembly Battery To B

Ford Ranger Cable Assembly

Ford Ranger Cable Assembly

Ford Ranger Cable Assembly

Ford Ranger Battery Cable

Ford Ranger Battery Cable Parts Questions & Experts Answers

Related Ford Ranger Parts

Browse by Year