How do I remove the under dash panel and locate the brake light switch assembly on Ford Thunderbird?

To replace the brake light switch, detach the under-dash panel. look for the switch near the top of the brake pedal and disconnect the brake light switch assembly from the brake pedal by removing the retaining clip. Install the switch to the electrical connector by snapping the clip into place.

Genuine Ford Thunderbird Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Brake Light Switches found

View related parts
Ford Thunderbird Switch Assembly - Stop Light
Part Number: E9ZZ-13480-A
$11.61 MSRP: $25.45
You Save: $13.84 (55%)
ADD TO CART
Product Specifications
- Other Name: Switch Assy - Stop Light; Stoplamp Switch
- Manufacturer Note: FROM 10/92
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1980-1988 Ford Thunderbird | 4 Cyl 2.3L, 6 Cyl 3.3L, 6 Cyl 3.8L, 8 Cyl 4.2L, 8 Cyl 5.0L | 3AT C3, 3AT C4, 3AT C5, 4AT A4LD, 4AT AOD, 5MT
View related parts
Ford Thunderbird Switch Assembly - Stop Light
Part Number: XW4Z-13480-AA
Product Specifications
- Other Name: Switch Assy - Stop Light; Stoplamp Switch, Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2005 Ford Thunderbird | 8 Cyl 3.9L DOHC EFI NA | 5-Speed Automatic Transmission 5R55S, 5-Speed Automatic Transmission NAAO 5R55N, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Thunderbird Switch Assy - Stop Light
Part Number: E6UZ-13480-A
Product Specifications
- Other Name: Stoplamp Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1989-1992 Ford Thunderbird | 6 Cyl 3.8L, 8 Cyl 5.0L | 4AT AOD, 5MT
View related parts
Ford Thunderbird Switch Assy - Stop Light
Part Number: E9SZ-13480-A
Product Specifications
- Other Name: Stoplamp Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1989-1997 Ford Thunderbird | 6 Cyl 3.8L, 8 Cyl 4.6L, 8 Cyl 5.0L | 4AT 4R70W, 4AT AOD, 5MT
View related parts
Ford Thunderbird Switch Assy - Stop Light
Part Number: F3SZ-13480-A
Product Specifications
- Other Name: Stoplamp Switch
- Manufacturer Note: w/anti,skid brakes
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1997 Ford Thunderbird | 6 Cyl 3.8L, 8 Cyl 4.6L, 8 Cyl 5.0L | 4AT 4R70W, 4AT AOD, 5MT

Ford Thunderbird Brake Light Switch

Brake light switch or the Ford Thunderbird Brake Light Switch is a component that turns on the brake lights in the car when the brake pedal is depressed, to warn other drivers that the car is applying brakes or is about to stop. It will help greatly in precaution and safety on roads by informing all those behind the Thunderbird what the driver's intention is. Although, in the course of the manufacturing of the different models of Thunderbird, past and present, there may be changes in the type or design of Brake Light Switch used, nonetheless, the brake light switch is industrially and undoubtedly utilized in the same way in all these models.

We provide a wide range of Ford Thunderbird Brake Light Switch at the best prices possible. If you need Ford Thunderbird Brake Light Switch, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Thunderbird Brake Light Switch Parts Questions & Experts Answers

Switch Assy - Stop Light
E6UZ-13480-A
Q: How do I remove the under dash panel and locate the brake light switch assembly on Ford Thunderbird?
A: To replace the brake light switch, detach the under-dash panel. look for the switch near the top of the brake pedal and disconnect the brake light switch assembly from the brake pedal by removing the retaining clip. Install the switch to the electrical connector by snapping the clip into place.