×
- Live Chat
- 1-888-788-9341
My Garage
My Account
Cart
Genuine Ford Thunderbird Wheel Hub
Wheel Axle Hub- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
24 Wheel Hubs found
Ford Thunderbird Knuckle And Hub Assembly
Part Number: 2W4Z-5B715-AA$969.26 MSRP: $1346.47You Save: $377.21 (29%)Ships in 1-2 Business Days
Ford Thunderbird Hub
Part Number: E9SZ-1104-B$31.21 MSRP: $42.65You Save: $11.44 (27%)Ships in 1 Business Day
Ford Thunderbird Knuckle And Hub Assembly
Part Number: 2W4Z-5B716-AA$1027.39 MSRP: $1427.22You Save: $399.83 (29%)Ships in 1-2 Business Days
| Page 1 of 2 |Next >
1-20 of 24 Results
Ford Thunderbird Wheel Hub
Housing considerable parts such as wheel bearings, sensors, and brake parts besides joining the wheel to the vehicle is referred to as the Wheel Hub of Ford Thunderbird vehicles. The following are the types of Wheel Hubs: Unit assemblies with bearings that have bearings already built in the unit; the non-driven axle Hubs with replaceable tapered roller bearings which do not have bearings but are designed with a slot to accommodate the Tapered roller bearings. It is appropriate that wheel bearings like any other parts in vehicles should be given proper care and attention since when they get worn it produce noise and vibration and the worse is that the wheel can fall off. Some parts of the wheel hub could be easily replaced with the other; however the repair of the wheel hub could involve very sensitive processes and needs a variety of tools to enable proper alignment and setting for proper working of vehicles. The wheel hub is a wheel bearing that enables the tires to spin freely while keeping it in place, comes in two styles for drive and non-drive wheels to enhance vehicle performance and durability.
We provide a wide range of Ford Thunderbird Wheel Hub at the best prices possible. If you need Ford Thunderbird Wheel Hub, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.
Ford Thunderbird Wheel Hub Parts Questions & Experts Answers
- Q: How to remove and replace the front Wheel Hub on Ford Thunderbird?A: The front wheel bearings are a single unit hub design and are pre-greased, sealed and require no maintenance. The bearings are pre-set and cannot be adjusted. If a bearing replacement is required, the hub and bearing assembly must be replaced as an assembly. To remove, first loosen the wheel lug nuts, apply the parking brake and raise the vehicle. Support it securely on jackstands placed under the frame. Remove the wheel. Next, remove the grease cap from the hub and discard it. Then, remove the brake caliper and secure it with wire so that it does not interfere with the spindle. Remove the brake disc. Remove the hub nut and discard it. Finally, remove the hub and bearing assembly. If the hub assembly is not easily removed by hand, use a puller. Note: If the assembly cannot be removed by hand, use a two-jaw puller. Don't immerse the hub unit in solvent. It is packed with grease at the factory and to do so would ruin it. To install, simply reverse the removal process. Tighten the hub nut to the torque.
