How to maintain and replace windshield wiper blades on Lincoln Mark VII?

Regularly wash wiper blades with mild detergent to remove road film. Inspect the windshield wiper and blade assembly periodically, as sun and elements can cause the rubber to crack. Replace hardened or cracked blades. Test the wipers on a wet windshield and replace if they leave an uneven pattern or streaks. Check and tighten the fasteners of the wiper mechanism. To remove the blade assembly, use a small screwdriver to push down on the release spring at the center of the blade, then lift the release lever or press down with the screwdriver and pull the wiper blade off the wiper arm pin. To install, push the blade assembly onto the pin until it snaps into place. To replace the rubber blade element, use a screwdriver to release it from the retaining claw and slide it out. Install a new element by sliding it into the retaining claws and securing it by twisting the backing strip into the end claws. Ensure all claws are locked onto the strip before installing the blade on the wiper arm.

Genuine Lincoln Mark VII Wiper Blade

Windshield Wiper Blade

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wiper Blades found

View related parts
Lincoln Mark VII Wiper Blade Assembly
Part Number: 2U2Z-17528-EA
$13.73 MSRP: $18.75
You Save: $5.02 (27%)
ADD TO CART
Product Specifications
- Other Name: Blade Assembly - Wiper
- Position: Passenger Side
- Replaced by: GU2Z-17V528-L
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1992 Lincoln Mark VII | 8 Cyl 5.0L | 4AT AOD
View related parts
Lincoln Mark VII Wiper Blade Assembly
Part Number: XL6Z-17528-AA
$13.73 MSRP: $18.75
You Save: $5.02 (27%)
ADD TO CART
Product Specifications
- Other Name: Blade Assembly - Wiper
- Replaced by: GU2Z-17V528-L
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1992 Lincoln Mark VII | 8 Cyl 5.0L | 4AT AOD
View related parts
Lincoln Mark VII Wiper Blade Assembly
Part Number: 4U2Z-17528-FA
$10.64 MSRP: $13.98
You Save: $3.34 (24%)
Product Specifications
- Other Name: Blade Assembly - Wiper
- Position: Passenger Side
- Replaced by: MU2Z-17V528-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1992 Lincoln Mark VII | 8 Cyl 5.0L | 4AT AOD

Lincoln Mark VII Wiper Blade

The Wiper Blade of Lincoln Mark VII cars is used to enhance visibility by removing any obstacle that may be on the windshield such as raindrop's, snow, dirt and any debris. This part comprises of a metallic holder and a rubber scraper that is powered by electricity or air actuating the scraper to move to-and-fro, thus cleaning the glass. The system usually comprises two radial arms oscillating in phase leading to excellent wiping. In the course of the years, several types of Wiper Blades may have been applied to the Mark VII, where the changes mainly address the construction of the rubber squeegee on one hand and the accompanying structure on the other hand. Daily check for signs of wear and damages like bent frames, streaking, splitting, or chattering should be made in order to retain the optimal performance as well as safety on the road.

We provide a wide range of Lincoln Mark VII Wiper Blade at the best prices possible. If you need Lincoln Mark VII Wiper Blade, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Lincoln Mark VII Wiper Blade Parts Questions & Experts Answers

Wiper Blade Assembly
2U2Z-17528-EA
Q: How to maintain and replace windshield wiper blades on Lincoln Mark VII?
A: Regularly wash wiper blades with mild detergent to remove road film. Inspect the windshield wiper and blade assembly periodically, as sun and elements can cause the rubber to crack. Replace hardened or cracked blades. Test the wipers on a wet windshield and replace if they leave an uneven pattern or streaks. Check and tighten the fasteners of the wiper mechanism. To remove the blade assembly, use a small screwdriver to push down on the release spring at the center of the blade, then lift the release lever or press down with the screwdriver and pull the wiper blade off the wiper arm pin. To install, push the blade assembly onto the pin until it snaps into place. To replace the rubber blade element, use a screwdriver to release it from the retaining claw and slide it out. Install a new element by sliding it into the retaining claws and securing it by twisting the backing strip into the end claws. Ensure all claws are locked onto the strip before installing the blade on the wiper arm.