×
- Live Chat
- 1-888-788-9341
My Garage
My Account
Cart
Genuine Lincoln MKX Exhaust Manifold
Engine Exhaust Manifold- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
9 Exhaust Manifolds found
Lincoln MKX Exhaust Manifold And Catalyst Assembly
Part Number: F2GZ-5G232-C$1398.27 MSRP: $1825.71You Save: $427.44 (24%)
Lincoln MKX Converter Assembly
Part Number: F2GZ-5G232-B$1299.97 MSRP: $1651.43You Save: $351.46 (22%)
Lincoln MKX Exhaust Manifold Assembly
Part Number: 7T4Z-9430-C$54.95 MSRP: $80.33You Save: $25.38 (32%)Ships in 1-3 Business Days
Lincoln MKX Exhaust Manifold Assembly
Part Number: 7T4Z-9431-B$69.52 MSRP: $86.33You Save: $16.81 (20%)
Lincoln MKX Exhaust Manifold Assembly
Part Number: AT4Z-9430-A$60.08 MSRP: $87.83You Save: $27.75 (32%)Ships in 1-3 Business Days
Lincoln MKX Exhaust Manifold And Catalyst Assembly
Part Number: BT4Z-5G232-B$775.81 MSRP: $982.86You Save: $207.05 (22%)Ships in 1-2 Business Days
Lincoln MKX Converter Assembly
Part Number: F2GZ-5G232-E$962.85 MSRP: $1221.43You Save: $258.58 (22%)Ships in 1-3 Business Days
Lincoln MKX Exhaust Manifold And Catalyst Assembly
Part Number: F2GZ-5G232-D$963.97 MSRP: $1222.86You Save: $258.89 (22%)Ships in 1-3 Business Days
Lincoln MKX Exhaust Manifold And Catalyst Assembly
Part Number: BT4Z-5G232-C$775.81 MSRP: $982.86You Save: $207.05 (22%)
Lincoln MKX Exhaust Manifold
In Lincoln MKX cars, the Exhaust Manifold is one of the essential components, which is responsible for chanelling the hot gases generated by the engine to the exhaust system for the purpose of optimizing the performance of the engine as well as minimizing toxic emissions. Located at the upper part of the exhaust system, Lincoln MKX Exhaust Manifold should eliminate the chance of the process called intake reversion, which can reduce the car's airflow and, in effect, its efficiency. Different models of the Lincoln MKX Exhaust Manifold have been used and they are usually of cast iron or stainless steel material. Those are termed as headers and are other alternatives that are intended on boosting engine performance through improved flow resistance and elevated exhaust gas velocity. The number of tubes used in the Lincoln MKX Exhaust Manifold depends with the number of cylinders of the engine to ensure proper gas harvest and channelling. It also becomes important to service the car regularly and if the exhaust manifold is bad then it must be replaced as early as possible.
We provide a wide range of Lincoln MKX Exhaust Manifold at the best prices possible. If you need Lincoln MKX Exhaust Manifold, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.
Lincoln MKX Exhaust Manifold Parts Questions & Experts Answers
- Q: How to remove and install the front and rear exhaust manifolds on Lincoln MKX?A: Before beginning this procedure, allow the engine to cool completely and apply penetrating oil to the manifold and converter fasteners. On 2.7L engines, the exhaust manifold is integrated into the cylinder head, and the turbochargers bolt directly to the cylinder heads. For 2011 through 2014 3.5L and 3.7L models, the front exhaust manifold and the catalytic converter are integrated into one piece, while in 2015 and later 3.5L models, both exhaust manifolds are integrated with the catalytic converters. To remove the front exhaust manifold, disconnect the cable from the negative battery terminal, disconnect the electrical connector for the oxygen sensor and the catalytic converter monitor, and on 2015 and later models, remove the cooling fan shroud assembly. Raise the front of the vehicle and support it securely on jackstands, then disconnect the exhaust Y-pipe from below. Remove the heat shield over the front exhaust manifold, discard the six nuts securing the exhaust manifold, and remove the manifold and converter. Extract the exhaust manifold studs using a stud holding tool or a pair of nuts tightened together over a stud, and discard them. Use a scraper to remove all old gasket material and carbon deposits from the manifold and cylinder head mating surfaces, being cautious not to gouge the aluminum engine parts. Install new exhaust manifold studs with light oil on the threads, place a new manifold gasket over the studs, and install the manifold with new self-locking nuts. Tighten the nuts, starting with the center fasteners and working towards the ends, to the specified torque, and complete the installation in reverse order. For the rear exhaust manifold, disconnect the cable from the negative battery terminal and the connector to the rear bank oxygen sensor, then raise the vehicle and support it securely on jackstands. Remove the Y-pipe-to-catalytic converter flange nuts and disconnect the Y-pipe, and for 2014 and earlier models, remove the rear-bank catalytic converter. Discard the six exhaust manifold mounting nuts and remove the manifold from the engine, along with the manifold gasket. Extract the exhaust manifold studs and discard them, then scrape off all gasket material and carbon deposits from the mating surfaces, taking care with aluminum parts. Install new exhaust manifold studs with light oil on the threads, place a new manifold gasket over the studs, and install the manifold with new self-locking nuts. Tighten the nuts, starting with the center fasteners and working towards the ends, to the specified torque, and complete the installation in reverse order.
