How do you remove and install the fuel rail and Fuel Injector on Lincoln MKX?

To remove the fuel rail, relieve the fuel system pressure, disconnect the negative battery terminal, remove necessary parts, and disconnect fuel lines and injector electrical connectors. Clean around each injector and remove the fuel rail and injectors. For installation, lubricate injector O-rings with engine oil, clean injector bores, install injectors to the rail with new clips, and press firmly when installing the fuel rail to the engine. Secure the fuel rail assembly and check for leaks. To replace fuel injector seals, discard the upper O-rings. Install Teflon lower seals on the injectors, use a socket to shrink the seal, install a new support ring, lubricate the upper O-ring before installing it on the injector.

Genuine Lincoln MKX Fuel Rail

Engine Fuel Rail

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Fuel Rails found

View related parts
Lincoln MKX Fuel Supply Manifold Assembly
Part Number: CJ5Z-9D280-A
$235.04 MSRP: $431.67
You Save: $196.63 (46%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Fuel Supply; Fuel Rail
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2018 Lincoln MKX | 4 Cyl 2.0L EcoBoost (240PS) | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, 8-Speed Automatic Transmission 8F35, 8-Speed Automatic Transmission 8F57, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Lincoln MKX Fuel Supply Manifold Assembly
Part Number: GT4Z-9F792-A
$196.08 MSRP: $286.67
You Save: $90.59 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Fuel Supply; Fuel Rail
- Replaces: AT4Z-9F792-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2018 Lincoln MKX | 6 Cyl 3.5L DOHC VCT SMPI, 6 Cyl 3.7L DOHC | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, 8-Speed Automatic Transmission 8F35, 8-Speed Automatic Transmission 8F57, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Lincoln MKX Fuel Supply Manifold Assembly
Part Number: 7T4Z-9F792-F
$435.05 MSRP: $641.67
You Save: $206.62 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Fuel Supply
- Replaced by: 7T4Z-9F792-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Lincoln MKX | 6 Cyl 3.5L DOHC VCT SMPI | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Lincoln MKX Fuel Supply Manifold Assembly
Part Number: FT4Z-9D280-A
$114.38 MSRP: $208.33
You Save: $93.95 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Fuel Supply; Fuel Rail
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Lincoln MKX | 6 Cyl 2.7L | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, 8-Speed Automatic Transmission 8F35, 8-Speed Automatic Transmission 8F57, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Lincoln MKX Fuel Supply Manifold Assembly
Part Number: FT4Z-9D280-B
$108.89 MSRP: $198.33
You Save: $89.44 (46%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Fuel Supply; Fuel Rail
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Lincoln MKX | 6 Cyl 2.7L | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, 8-Speed Automatic Transmission 8F35, 8-Speed Automatic Transmission 8F57, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Lincoln MKX Fuel Supply Manifold Assembly
Part Number: AT4Z-9F792-A
$196.08 MSRP: $286.67
You Save: $90.59 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Fuel Supply
- Replaced by: GT4Z-9F792-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2015 Lincoln MKX | 6 Cyl 3.5L DOHC VCT SMPI, 6 Cyl 3.7L DOHC | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive

Lincoln MKX Fuel Rail Parts Questions & Experts Answers

Fuel Supply Manifold Assembly
GT4Z-9F792-A
Q: How do you remove and install the fuel rail and Fuel Injector on Lincoln MKX?
A: To remove the fuel rail, relieve the fuel system pressure, disconnect the negative battery terminal, remove necessary parts, and disconnect fuel lines and injector electrical connectors. Clean around each injector and remove the fuel rail and injectors. For installation, lubricate injector O-rings with engine oil, clean injector bores, install injectors to the rail with new clips, and press firmly when installing the fuel rail to the engine. Secure the fuel rail assembly and check for leaks. To replace fuel injector seals, discard the upper O-rings. Install Teflon lower seals on the injectors, use a socket to shrink the seal, install a new support ring, lubricate the upper O-ring before installing it on the injector.