×
- Live Chat
- 1-888-788-9341
My Garage
My Account
Cart
Genuine Lincoln MKX Ignition Switch
Starter Ignition Switch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Ignition Switches found
Lincoln MKX Switch Assembly - Ignition
Part Number: DG9Z-11572-A$59.95 MSRP: $99.09You Save: $39.14 (40%)Ships in 1 Business Day
Lincoln MKX Switch Assembly - Ignition
Part Number: 98AZ-11572-A$59.95 MSRP: $99.09You Save: $39.14 (40%)Ships in 1 Business Day
Lincoln MKX Switch - Ignition Impulse Counting
Part Number: BT4Z-12A145-A$69.30 MSRP: $105.00You Save: $35.70 (34%)Ships in 1-3 Business Days
Lincoln MKX Ignition Switch
The Ignition Switch is a component embedded in Lincoln MKX cars with duty to start the vehicle engine and turning on all sorts of electrical equipments such as the radio and power windows among others. It means that turning Ignition Switch with a key, button or remote signal the computer of the vehicle to command the starter solenoid & ignition parts to start running the engine. In the course of this period, different lincoln MKX models have incorporated the mechanical key systems as well as incorporation of keyless ignition. The latter herein uses a push button for its activation but needs a signal from a transponder for security. The old format of the Ignition Switch required the use of one key as the means of unlocking the system but, with the improvement in technologies, there are ways to enhance the ease in use of this switch without jeopardizing the safety of the car. In any case, the particular Ignition Switch in the Lincoln MKX cars remains easy to replace, in the plug-and-play basis, adjusted to the model.
We provide a wide range of Lincoln MKX Ignition Switch at the best prices possible. If you need Lincoln MKX Ignition Switch, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.
Lincoln MKX Ignition Switch Parts Questions & Experts Answers
- Q: How do you remove and install the key lock cylinder and ignition switch on Lincoln MKX?A: Disconnect the cable from the negative terminal of the battery. Remove the instrument cluster upper and lower trim panels. Using a small screwdriver, detach the tabs securing the Passive Anti-Theft System (PATS) transceiver to the ignition lock cylinder housing, then pull the transceiver off the housing and disconnect the electrical connector. Insert the ignition key into the ignition lock cylinder and turn it to the ACC position. Insert an awl or suitable tool into the hole in the underside of the ignition lock cylinder, then depress the ignition lock cylinder retaining tab and remove the ignition lock cylinder. To install the ignition lock cylinder, insert it into the lock cylinder housing and push it in until it clicks into place. Verify that the ignition switch operates correctly in the OFF, ACC, RUN, and START positions, with installation being the reverse of removal. For 2014 and earlier models, do not remove the ignition switch and the ignition lock cylinder at the same time to avoid damaging the steering column. Remove the fasteners securing the ignition lock cylinder housing, disconnect the electrical connector for the PATS transceiver, and disconnect the electrical connector from the ignition switch. Depress the release tabs to detach the ignition switch from the ignition lock cylinder, ensuring that it snaps into place during installation, which is otherwise the reverse of removal. For 2015 and later keyless entry models, carefully pry out the left-side center air register from the instrument panel using a trim tool, disconnect the electrical connector from the push start ignition switch, and from the back side of the instrument panel, depress the two retaining tabs on the switch then push the ignition switch button out of the instrument panel.
