How to service valves, valve seats, and valve guides on Lincoln Town Car?

Due to the intricate nature of the task and the high cost of the necessary special tools and equipment, servicing of the valves, valve seats, and valve guides, often referred to as a valve job, is typically more conveniently and affordably carried out by an automotive machine shop. A home mechanic can remove and disassemble the head, perform the initial cleaning and inspection, then reassemble and deliver it to a dealer service department or an automotive machine shop for the actual service work. This inspection allows the mechanic to assess the condition of the head and valve train components and to understand what work and new parts are needed when interacting with an automotive machine shop. The dealer service department or automotive machine shop will then remove the valves and springs, recondition or replace the valves and valve seats, recondition the valve guides, check and replace the valve springs, spring retainers or rotators and keepers (if necessary), replace the valve seals with new ones, reassemble the valve components and ensure the installed spring height, and pressure, is correct. The cylinder head gasket surface will also be resurfaced if it's warped, if not beyond service limits. It may be wise to have the cylinder head pressure checked for internal coolant leaks, particularly if the engine has overheated. After the valve job, the head will be in a condition similar to new. When the head is returned, it should be cleaned again before installation on the engine to remove any remaining metal particles and abrasive grit from the valve service or head resurfacing operations. Compressed air can be used to blow out all the oil holes and passages.

Genuine Lincoln Town Car Intake Valve

Engine Intake Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Intake Valves found

View related parts
Lincoln Town Car Valve - Inlet
Part Number: XL3Z-6507-AA
$38.80 MSRP: $70.67
You Save: $31.87 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Intake Valve, Valve
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2011 Lincoln Town Car | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4AT 4R70W, 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R70E W/TSS, 4-Speed Automatic Transmission AODEW/4R70E W/TSS*S/V, 4-Speed Automatic Transmission AODEW/4R75E W/TSS S/V, 4-Speed Automatic Transmission NAAO AODEW/4R70W*S/VIL, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Lincoln Town Car Valve - Inlet
Part Number: E3ZZ-6507-A
$13.73 MSRP: $18.75
You Save: $5.02 (27%)
ADD TO CART
Product Specifications
- Other Name: Intake Valve, Valve
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1982-1985 Lincoln Town Car | 8 Cyl 5.0L | 4AT AOD
View related parts
Lincoln Town Car VALVE-INTAKE STD
Part Number: E5ZZ6507D
$13.73 MSRP: $18.75
You Save: $5.02 (27%)
ADD TO CART
Product Specifications
- Other Name: Intake Valve
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1982-1989 Lincoln Town Car | 8 Cyl 5.0L | 4AT AOD
View related parts
Lincoln Town Car Valve - Inlet
Part Number: E8ZZ-6507-A
$41.06 MSRP: $59.00
You Save: $17.94 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Intake Valve
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1982-1989 Lincoln Town Car | 8 Cyl 5.0L | 4AT AOD
View related parts
Lincoln Town Car Valve Inlet
Part Number: E7AZ6507A
Product Specifications
- Other Name: Valve - Inlet; Intake Valve, Valve
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1986-1990 Lincoln Town Car | 8 Cyl 5.0L | 4AT AOD
View related parts
Lincoln Town Car Valve
Part Number: E83Z6507A
Product Specifications
- Other Name: Valve - Inlet; Valves
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1988-1989 Lincoln Town Car | 8 Cyl 5.0L | 4AT AOD
View related parts
Lincoln Town Car Valve Inlet
Part Number: E8ZZ6507C
Product Specifications
- Other Name: Valve - Inlet
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1982-1989 Lincoln Town Car | 8 Cyl 5.0L | 4AT AOD
View related parts
Lincoln Town Car Valve - Inlet
Part Number: F5AZ-6507-A
Product Specifications
- Other Name: Intake Valve, Valve
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1991-2000 Lincoln Town Car | 8 Cyl 4.6L | 4AT, 4AT 4R70W, 4AT AOD, 4AT AODE

Lincoln Town Car Intake Valve

The Intake Valve in Lincoln Town Car vehicles is another major assembly that has the responsibility of regulating the supply of air and the sharply measured fuel for combustion. In their normal working condition, these valves improve power and efficiency of the automobiles. Intake valve failure causes poor combustion, low power output, and consequently would require replacement if these problems escalate the cost of repairs. In the replacement process, certain tools such as a valve spring removal tool, and a compressor with the correct size are used to remove and compress the valve head on the seat with adequate force in order not to harm the valve seat or the guide/Seal. In general, it is crucial to pay attention to the condition of intake valves and perform the necessary maintenance aiming at the engine of Lincoln Town Car automobiles.

We provide a wide range of Lincoln Town Car Intake Valve at the best prices possible. If you need Lincoln Town Car Intake Valve, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Lincoln Town Car Intake Valve Parts Questions & Experts Answers

Valve - Inlet
XL3Z-6507-AA
Q: How to service valves, valve seats, and valve guides on Lincoln Town Car?
A: Due to the intricate nature of the task and the high cost of the necessary special tools and equipment, servicing of the valves, valve seats, and valve guides, often referred to as a valve job, is typically more conveniently and affordably carried out by an automotive machine shop. A home mechanic can remove and disassemble the head, perform the initial cleaning and inspection, then reassemble and deliver it to a dealer service department or an automotive machine shop for the actual service work. This inspection allows the mechanic to assess the condition of the head and valve train components and to understand what work and new parts are needed when interacting with an automotive machine shop. The dealer service department or automotive machine shop will then remove the valves and springs, recondition or replace the valves and valve seats, recondition the valve guides, check and replace the valve springs, spring retainers or rotators and keepers (if necessary), replace the valve seals with new ones, reassemble the valve components and ensure the installed spring height, and pressure, is correct. The cylinder head gasket surface will also be resurfaced if it's warped, if not beyond service limits. It may be wise to have the cylinder head pressure checked for internal coolant leaks, particularly if the engine has overheated. After the valve job, the head will be in a condition similar to new. When the head is returned, it should be cleaned again before installation on the engine to remove any remaining metal particles and abrasive grit from the valve service or head resurfacing operations. Compressed air can be used to blow out all the oil holes and passages.