Q: How to remove and install a hub and bearing assembly on Lincoln Town Car?
A: Remove the wheel cover (if applicable). Remove the dust cap and break loose the hub and bearing assembly retaining nut with a 1/2- inch drive breaker bar and socket. Use a "cheater" bar or pipe if necessary. Don't remove the nut yet. Loosen the wheel lug nuts. Raise the vehicle and place it securely on jackstands. Remove the wheel. Remove the brake caliper and the disc. Remove the hub and bearing assembly retaining nut and remove the hub and bearing assembly. If the assembly cannot be removed by hand, use a suitable hub puller. Caution: On models equipped with ABS brakes, be careful not to damage the ABS sensor or sensor ring when removing the hub. Installation is the reverse of removal. After the vehicle is back on the ground, be sure to tighten the wheel lug nuts to the torque and the hub and bearing assembly retaining nut to the torque.