Genuine Mercury Capri Engine Cooling Fan

Radiator Fan
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Engine Cooling Fan found

  • Mercury Capri Engine Cooling Fan - F3ZZ-8600-A
    View related parts
    Product Specifications
    • Other Name: Fan Assy; Fan, Fan Blade
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 1985-1986 Mercury Capri | 4 Cyl 2.3L, 6 Cyl 3.8L, 8 Cyl 5.0L | 3AT C3, 3AT C5, 4AT AOD, 4MT, 5MT

Mercury Capri Engine Cooling Fan Parts Questions & Experts Answers

  • Q: How to replace a flex-blade fan and a clutch-type fan on Mercury Capri?
    A: A flex-blade fan is used on 1979 through 1981 models. Flexible blades are riveted to a central stamped hub, reducing drag for lower noise and lower fuel consumption. Check the fan carefully for cracks or separation of the blades from the hub, and replace if any issues are found. To remove the fan, detach the fan shroud from the radiator and push it over the fan, then unbolt the fan and spacer from the water pump pulley. To install the fan, reverse the removal procedure. The clutch-type fan employs rigid blades with an aluminum fan clutch at the center. Check for cracks and fluid leakage, and replace if necessary. Try to move the fan blades in a front-to-rear direction and spin the fan by hand to ensure proper functioning. To remove the fan, detach the fan shroud from the radiator and push it over the fan, then unbolt the fan and clutch from the water pump pulley. To separate the clutch from the fan, remove the attaching bolts. When storing the fan, place the marked side down. To install the fan, reverse the removal procedure.

Related Mercury Capri Parts