×
- Live Chat
- 1-888-788-9341
My Garage
My Account
Cart
Genuine Mercury Grand Marquis Drive Shaft
Axle Shaft- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
8 Drive Shafts found
Mercury Grand Marquis Drive Shaft
The Drive Shaft in Mercury Grand Marquis is used where mechanical power and torque requirement needs to be transmitted from the engine or the transmission to the drive wheels. This metal rod is intended to be applied where two elements are inoperably located and can only be connected by means of this bridge with the necessary distance and permitted movements. It usually employs universal joints or splined joints for handling the alignment problems at the same time as being stiff and exerting minimal moment of inertia. Different types of Drive Shafts have been used on the Grand Marquis over the years consisting of one peice and two piece driveshafts. This special feature is the two-piece driveshaft which is especially preferable with a view to the crash safety. As used in the rear-wheel drive system, therefore, the driveshaft transmits power from the front-mounted engine to the rear axle for efficient operation and control.
We provide a wide range of Mercury Grand Marquis Drive Shaft at the best prices possible. If you need Mercury Grand Marquis Drive Shaft, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.
Mercury Grand Marquis Drive Shaft Parts Questions & Experts Answers
- Q: How to inspect a Mercury Grand Marquis's driveshaft?A: First of all, you must jack up the vehicle and make sure to check out the drive shaft for dents or cracks. Also, at the front and rear of the drive shaft, you should look out for any oil leaking out. For proper functioning and wear, inspect the Universal Joints. After that, you can secure or adjust the bolts of the propeller shaft on your vehicle.
- Q: How to remove and reinstall a driveshaft on a Mercury Grand Marquis?A: Raise the rear of the vehicle and support it securely on jackstands. Mark the relationship of the driveshaft to the differential companion flange to ensure that the driveshaft retains its dynamic balance after reinstalling it. Remove the bolts and separate the driveshaft from the differential companion flange using a 12-point socket or box end wrench. To remove the bolts that attach the driveshaft to the differential companion flange, insert a small prybar or large screwdriver through the rear U-joint and hold the driveshaft while you break loose the four flange bolts. Pull the driveshaft toward the rear to remove it. Wrap a plastic bag lightly around the extension housing of the transmission to prevent fluid loss. Installation is the reverse of removal. Be sure to align the reference marks made during removal. The factory recommends using new bolts when the driveshaft is reinstalled. If new bolts are not available, use a suitable thread-locking compound on the original bolts.
