My Garage
My Account
Cart
Genuine Mercury Mariner Accelerator Cable
Choke Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Accelerator Cables found
Mercury Mariner Throttle Control Cable Assembly
Part Number: 5L8Z-9A758-CA$44.77 MSRP: $83.55You Save: $38.78 (47%)Ships in 1-2 Business Days
Mercury Mariner Throttle Control Cable Assembly
Part Number: 7L8Z-9A758-D$48.91 MSRP: $91.28You Save: $42.37 (47%)
Mercury Mariner Throttle Control Cable Assembly
Part Number: 7L8Z-9A758-C$37.51 MSRP: $68.81You Save: $31.30 (46%)Ships in 1-3 Business Days
Mercury Mariner Throttle Control Cable Assembly
Part Number: 5L8Z-9A758-DA$53.04 MSRP: $99.00You Save: $45.96 (47%)
Mercury Mariner Accelerator Cable
The Mercury Mariner Accelerator Cable is the critical link that translates the driver's right-foot pressure into appropriate throttle movement, allowing the engine to inhale the air/fuel mixture it demands. The Accelerator Cable connects the pedal in the cabin to the throttle plate in the barrel of the carburetor in a carbureted powertrain. The plate will open when the pedal is pressed. The vacuum will rise, which will cause extra fuel to rush from the float bowl into the venturi for stronger combustion. By releasing the pedal, the spring tension returns the plate and the slack in the Accelerator Cable, and airflow settles to cruising levels. The early Mercury SUVs in the Mariner family of vehicles incorporated this simple steel braided Accelerator Cable design, which is lightweight, easy to route, and easy to manufacture. Certain versions of the same generation adopted, instead, a rigid rod mechanical linkage that traded flexible strands for solid arms and pivots. That alternate layout gives direct feel but adds mass and needs precise alignment, while the conventional Accelerator Cable can misroute without binding and is the favored choice in major Mercury Mariner trims. Today, many Mercury Mariner drivers still trust its response.
We provide a wide range of Mercury Mariner Accelerator Cable at the optimal prices. If you need Mercury Mariner Accelerator Cable, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.
Mercury Mariner Accelerator Cable Parts Questions & Experts Answers
- Q: How to disconnect and reconnect the accelerator cable on Mercury Mariner?A:This guide applies to 2008 and earlier models. Disconnect the cable from the negative battery terminal. For V6 models, remove the engine cover. Detach the accelerator cable from the air intake duct or intake manifold. Disengage the accelerator cable from the cable bracket and Throttle Body. Inside the car, disengage the lower end of the accelerator cable from the pedal. Pull the cable through the firewall, remove the grommet and pull the cable through the hole. Installation is the reverse of removal. Ensure the throttle valve moves smoothly. After reconnecting the battery, the PCM must relearn its idle and fuel trim strategy.
