How do I remove and install the blower motor and blower motor resistor in a Mercury Mariner?

For 2007 and earlier models, remove the trim panel below the glove box. Disconnect the blower motor resistor's electrical connector and remove screws. Extract the resistor from the evaporator housing. For later models, remove the glove box. Disconnect the blower motor connector, remove screws and take out the motor. For 2008 onwards, remove the glove box and trim panel. Disconnect the blower motor wiring, release vent duct clips and remove the duct. Turn the blower motor counterclockwise to remove. To install, reverse these steps.

Genuine Mercury Mariner Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Blower Motor Resistors found

View related parts
Mercury Mariner Resistor Assembly
Part Number: 3F2Z-18591-AA
$33.44 MSRP: $64.00
You Save: $30.56 (48%)
ADD TO CART
Product Specifications
- Other Name: Resistor Assy; Blower Motor Resistor, Resistor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Mercury Mariner | 4 Cyl 2.3L, 4 Cyl 2.3L Hybrid Gas/Electric DOHC, 4 Cyl 2.5L Duratec (110kW/150PS), 4 Cyl 2.5L PFI Gas/Electric, 6 Cyl 3.0L DOHC EFI Modular, 6 Cyl 3.0L OHC Duratec | 4AT CD4E, 5-Speed Manual Transmission - AK, 6-Speed Automatic Transmission 6F Mid-Range, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Mercury Mariner Control
Part Number: 9L3Z-19E624-B
$75.79 MSRP: $125.27
You Save: $49.48 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Control Module, Controller, Resistor
- Replaced by: 9L3Z-19E624-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Mercury Mariner | 4 Cyl 2.5L Duratec (110kW/150PS), 4 Cyl 2.5L PFI Gas/Electric, 6 Cyl 3.0L OHC Duratec | 4AT CD4E, 5-Speed Manual Transmission - AK, 6-Speed Automatic Transmission 6F Mid-Range, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Mercury Mariner Control
Part Number: 7C3Z-19E624-B
$75.79 MSRP: $125.27
You Save: $49.48 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Replaced by: 9L3Z-19E624-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Mariner | 4 Cyl 2.3L, 4 Cyl 2.3L Hybrid Gas/Electric DOHC, 4 Cyl 2.5L Duratec (110kW/150PS), 4 Cyl 2.5L PFI Gas/Electric, 6 Cyl 3.0L DOHC EFI Modular, 6 Cyl 3.0L OHC Duratec | 4AT CD4E, 5-Speed Manual Transmission - AK, 6-Speed Automatic Transmission 6F Mid-Range, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Mercury Mariner Control
Part Number: 7C3Z-19E624-C
$75.79 MSRP: $125.27
You Save: $49.48 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Replaced by: 9L3Z-19E624-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Mercury Mariner | 4 Cyl 2.5L Duratec (110kW/150PS), 4 Cyl 2.5L PFI Gas/Electric, 6 Cyl 3.0L OHC Duratec | 4AT CD4E, 5-Speed Manual Transmission - AK, 6-Speed Automatic Transmission 6F Mid-Range, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Mercury Mariner Resistor Assembly
Part Number: 4L3Z-19A706-AA
$28.16 MSRP: $44.91
You Save: $16.75 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor Assy; Blower Motor Resistor, Resistor
- Replaces: F4ZZ-19A706-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Mariner | 4 Cyl 2.3L, 4 Cyl 2.3L Hybrid Gas/Electric DOHC, 6 Cyl 3.0L DOHC EFI Modular | 4AT CD4E, 5-Speed Manual Transmission, 5-Speed Manual Transmission - AK, 6-Speed Automatic Transmission 6F Mid-Range, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Right Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive), Two-Wheel Drive (Right Hand Drive)

Mercury Mariner Blower Motor Resistor

The Blower Motor Resistor is an important Mercury Mariner motor part used to control the electrical blower motor speed that distributes air within the motor to ensure a comfort kept within the car for the passengers. This device has a custodian duty of making sure that the airflow in the cabin of the car is in check in order to promote a comfortable ride. Thus, regardless of the difference in the type or the variation of Blower Motor Resistors that may exist in the different models of Mariner, their inherent role does not deviate from the general description provided above.

We provide a wide range of Mercury Mariner Blower Motor Resistor at the best prices possible. If you need Mercury Mariner Blower Motor Resistor, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Mercury Mariner Blower Motor Resistor Parts Questions & Experts Answers

Control
7C3Z-19E624-B
Q: How do I remove and install the blower motor and blower motor resistor in a Mercury Mariner?
A: For 2007 and earlier models, remove the trim panel below the glove box. Disconnect the blower motor resistor's electrical connector and remove screws. Extract the resistor from the evaporator housing. For later models, remove the glove box. Disconnect the blower motor connector, remove screws and take out the motor. For 2008 onwards, remove the glove box and trim panel. Disconnect the blower motor wiring, release vent duct clips and remove the duct. Turn the blower motor counterclockwise to remove. To install, reverse these steps.