What is the importance of frequent oil and filter changes for home mechanics on Mercury Mariner?

Frequent oil changes are necessary to avoid pre-emptive maintenance. Have equipment and materials. Raise the car so you can easily work on it. Start the engine and let it run for a while. Find a flat spot, remove the oil filler cap, and put up the vehicle on jack stands. Put your drain pan under that plug and remove it. Check drained oil for metal shavings. Clean and reinstall plug. Position your drain pan below the filter, loosen it, unscrew it by hand. Clean the surface where filter going to sit then put in new one. Release the jack stands, replenish with new oil making sure that you fill until full, check level of the oil again. Check if there are leaks through starting up the engine and measuring the amount of oil left in the car's reservoir including other parts after which remove it carefully into an approved waste container so as not to pollute environment.

Genuine Mercury Mariner Oil Filter

Engine Oil filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Oil Filters found

View related parts
Mercury Mariner Filter Assembly - Oil
Part Number: AA5Z-6714-A
$6.16 MSRP: $11.80
You Save: $5.64 (48%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Oil Filter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Mercury Mariner | 6 Cyl 3.0L OHC Duratec | 4AT CD4E, 5-Speed Manual Transmission - AK, 6-Speed Automatic Transmission 6F Mid-Range, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Mercury Mariner Filter Assembly - Oil
Part Number: F1AZ-6731-BD
$13.73
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Oil Filter
- Replaces: F1AZ-6731-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2008 Mercury Mariner | 6 Cyl 3.0L DOHC EFI Modular | 4AT CD4E, 5-Speed Manual Transmission, 5-Speed Manual Transmission - AK, 6-Speed Automatic Transmission 6F Mid-Range, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Right Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive), Two-Wheel Drive (Right Hand Drive)
View related parts
Mercury Mariner Filter Assembly - Oil
Part Number: 1S7Z-6731-DA
$7.40 MSRP: $11.80
You Save: $4.40 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Filter Assy - Oil
- Replaced by: BE8Z-6731-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2011 Mercury Mariner | 4 Cyl 2.3L, 4 Cyl 2.5L Duratec (110kW/150PS), 4 Cyl 2.5L PFI Gas/Electric | 4AT CD4E, 5-Speed Manual Transmission, 5-Speed Manual Transmission - AK, 6-Speed Automatic Transmission 6F Mid-Range, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Right Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive), Two-Wheel Drive (Right Hand Drive)
View related parts
Mercury Mariner Filter Assembly - Engine Oil - Elem
Part Number: 3S7Z-6731-A
$10.55 MSRP: $16.82
You Save: $6.27 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Filter Assy - Engine Oil - Element; Filter Element, Oil Filter
- Replaces: 3M4Z-6744-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2009 Mercury Mariner | 4 Cyl 2.3L Hybrid Gas/Electric DOHC, 4 Cyl 2.5L Duratec (110kW/150PS), 4 Cyl 2.5L PFI Gas/Electric | 4AT CD4E, 5-Speed Manual Transmission - AK, 6-Speed Automatic Transmission 6F Mid-Range, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Mercury Mariner Filter Assembly
Part Number: 6M8Z-6731-AA
$9.22 MSRP: $17.51
You Save: $8.29 (48%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter Assy
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Mercury Mariner | 4 Cyl 2.5L Duratec (110kW/150PS), 4 Cyl 2.5L PFI Gas/Electric | 4AT CD4E, 5-Speed Manual Transmission - AK, 6-Speed Automatic Transmission 6F Mid-Range, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive

Mercury Mariner Oil Filter

The Oil Filter of Mercury Mariner vehicles is highly essential to sustain the proper internal health of the engine because it provides for the filtration of contaminants within the oil and thereby providing for clean oil circulation. They are available in replaceable element cartridge or spin-on type and can use cellulose or synthetic media. Spin-on filters come with strong metal canister, anti-drain back valve, and the bypass for smooth oil circulation and protection. When it comes to performance filters, there is increased strength, flow rate and filtration capacity to protect the engines. The engines have also continued to evolve with the advance in technology and so do the oil filters to support the modern engines.

We provide a wide range of Mercury Mariner Oil Filter at the best prices possible. If you need Mercury Mariner Oil Filter, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Mercury Mariner Oil Filter Parts Questions & Experts Answers

Filter Assembly - Engine Oil - Elem
3S7Z-6731-A
Q: What is the importance of frequent oil and filter changes for home mechanics on Mercury Mariner?
A: Frequent oil changes are necessary to avoid pre-emptive maintenance. Have equipment and materials. Raise the car so you can easily work on it. Start the engine and let it run for a while. Find a flat spot, remove the oil filler cap, and put up the vehicle on jack stands. Put your drain pan under that plug and remove it. Check drained oil for metal shavings. Clean and reinstall plug. Position your drain pan below the filter, loosen it, unscrew it by hand. Clean the surface where filter going to sit then put in new one. Release the jack stands, replenish with new oil making sure that you fill until full, check level of the oil again. Check if there are leaks through starting up the engine and measuring the amount of oil left in the car's reservoir including other parts after which remove it carefully into an approved waste container so as not to pollute environment.