Ford F5TZ-7000-CRM Automatic Transmission Assembly

You can Select Your Vehicle to check if F5TZ-7000-CRM fits your vehicle.

Some of the available automatic transmissions include the AOC 4-speed, C4, C5, C6 3-speed, E4OD 4-speed, and 4R7OW 4-speed.

The initial steps for removing the transmission are as follows:1. Disconnect the battery negative cable.2. Drain the transmission lubricant into a suitable container.

Some suggestions for a successful transmission overhaul include obtaining exploded-view drawings of the particular transmission, creating diagrams or taking photos during disassembly, laying out each part in order, checking for missed bolts or snap rings before applying force, and anticipating which parts may need replacement and having them available beforehand.

Information on new or rebuilt transmissions, including their cost, availability, and exchange policy, can be obtained from a local dealer or a transmission specialty shop.

To install the transmission, follow these steps:1. Push in and turn the converter to engage it with the front pump.2. Rotate the converter to align the bolt drive lugs and drain plug with the driveplate holes. Avoid a "nose-down" attitude to prevent disengagement of the converter from the pump gear.3. If the torque converter is bolted to the driveplate, position it with one bolt hole at the six o'clock position and install all bolts before tightening.4. Adjust the kickdown rod/cable, TV rod/cable, and manual selector linkage as needed.5. Lower the vehicle and add fluid to the Max mark on the dipstick with the engine off.6. Start the engine, check the fluid level, and top up if necessary.

The E4OD transmission is a fully automatic, electronically controlled, four-speed unit with a locking torque converter.