Make sure this part fits

Ford YW7Z-5A772-AA Bar - Stabilizer

1998-2011 Ford YW7Z5A772AA

Customer Questions & Expert Answers (7)
Ford YW7Z-5A772-AA Bar - Stabilizer
  • Part Description
    Bar - Stabilizer
  • Base No.
    5A772
  • Replaces
    F8AZ-5A772-AA
  • Manufacturer
    Ford
Make sure this part fits
$147.06 MSRP: $215.00
You Save: $67.94 (32%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.5A772
    Manufacturer Part NumberYW7Z-5A772-AA, YW7Z5A772AA
    Part DescriptionBar - Stabilizer
    Other NamesStabilizer Bar
    Item Dimensions37.2 x 17.9 x 3.6 inches
    Item Weight10.70 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ReplacesF8AZ-5A772-AA
    ManufacturerFord
    SKUYW7Z-5A772-AA
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1998-2011 Ford Crown Victoria8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI4-Speed Automatic Transmission 4R75E Livonia, 4AT, 4AT 4R70W, 4AT 4R75W, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
    1998-2011 Lincoln Town Car8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R70E W/TSS, 4-Speed Automatic Transmission AODEW/4R70E W/TSS*S/V, 4-Speed Automatic Transmission AODEW/4R75E W/TSS S/V, 4-Speed Automatic Transmission NAAO AODEW/4R70W*S/VIL, 4AT 4R70W, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
    2007-2011, 2001-2002, 1998-1999 Mercury Grand Marquis8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI4-Speed Automatic Transmission 4R75E Livonia, 4AT 4R70W, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
  • Customer Questions & Expert Answers

    Q:
    Will these fit my car and if not which part will? Thank you. Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if YW7Z-5A772-AA fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    How do you remove and install a front stabilizer bar on Lincoln Town Car? Posted by Customer
    A:
    Raise and secure the vehicle on jackstands. Disconnect the sway bar kit from the links by removing the nut at each end. Use pliers to hold the link if attached to lower control arms. For 1992 and later models, remove the nut from each end if links are attached to steering knuckles. Remove the bracket nuts and brackets to detach the bar from the frame. Remove the sway bar kit and reverse steps for installation, ensuring all fasteners are correctly tightened.
    Posted by FordPartsGiant Specialist
    Q:
    What needs to be done with the stabilizer bar-to-lower suspension arm bolts on the 1992 Lincoln Town Car? Posted by Customer
    A:
    Remove the four stabilizer bar-to-lower suspension arm bolts on pre-1992 models.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    How do you disconnect the stabilizer bar from the links on the 1998 Mercury Grand Marquis? Posted by Customer
    A:
    Remove the nut from each end of the stabilizer bar.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What should be done before driving the 2009 Mercury Grand Marquis? Posted by Customer
    A:
    Before driving a vehicle equipped with air suspension, the air suspension switch should be turned to On, the engine should be started, and the compressor should be allowed to inflate the air suspension springs, which deflate automatically when the rear of the vehicle is raised.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    How do you remove the stabilizer bar clamps for the 2009 Ford Crown Victoria? Posted by Customer
    A:
    Remove the stabilizer bar clamp nuts and remove the clamps.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    Why should the axle housing be free to hang down for the 1996 Ford Crown Victoria? Posted by Customer
    A:
    The axle housing must be free to hang down so that the shock absorbers are fully extended.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Sway Bar Kit
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part YW7Z-5A772-AA, the Right Choice

To ensure reliability, purchase Ford part # YW7Z-5A772-AA Bar - Stabilizer. It is sometimes referred to as Ford Sway Bar Kit. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Ford Crown Victoria models. It fits Lincoln Town Car. It also fits Mercury Grand Marquis.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford YW7Z5A772AA Bar - Stabilizer. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Ford parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly