Ford XF1Z-17528-AA Wiper Blade Assembly

You can Select Your Vehicle to check if XF1Z-17528-AA fits your vehicle.

First of all, to get rid of road film, use a mild detergent to wash the wiper blades regularly. Assess the condition of the rubber on each blade for possible cracks and deterioration. Promptly replace any blades with hardened or broken rubber. During regular inspections, check and tighten fasteners on the wiper mechanism. If you have Tridon blades, then park the wipers, lift the blade, press the spring lock, and reinstall it with a new assembly. On Tridon blades with replaceable elements, locate the TRIDON stamp at one corner of the rubber replacement element, release this using a coin or screwdriver then fit back securely using a new one. For earlier Tricoblades, lift up the wiper arm, lever out one end of an element, slide into the tabs, and secure the blade back onto the arm. For later Tricoblades; park wipers down, release blade using a screwdriver-separate element from a tab-insert new element into tabs-secure-lock blade onto pivot pin.

For later Tricoblades, park the wiper blades, use a screwdriver to release the blade, separate the element from the retaining tab, insert the new element into the tabs, and secure it before locking the blade onto the pivot pin.

Insert a screwdriver blade between the wiper blade and element, twist the screwdriver clockwise while pressing in and down to separate the element from the end retaining claw.

Simply squeeze the end of the element with needle nose pliers and withdraw the blade.