Make sure this part fits

Ford AT4Z-6250-B Camshaft

2011-2019 Ford AT4Z6250B

Customer Questions & Expert Answers (12)
Ford AT4Z-6250-B Camshaft
  • Part Description
    Camshaft
  • Base No.
    6250
  • Position
    Driver Side
  • Replaced By
    AT4Z-6250-G
  • Manufacturer
    Ford
Make sure this part fits
$112.86 MSRP: $140.17
You Save: $27.31 (20%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.6250
    Manufacturer Part NumberAT4Z-6250-B, AT4Z6250B
    Part DescriptionCamshaft
    Item Dimensions7.3 x 6.2 x 23.9 inches
    Item Weight4.30 Pounds
    PositionDriver Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKUAT4Z-6250-B
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2011-2019 Ford Edge6 Cyl 3.5L Cyclone Petrol TIVCT, 6 Cyl 3.5L DOHC VCT SMPI, 6 Cyl 3.7L DOHC6-Speed Automatic Transmission 6DCT450 - MPS6, 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, 6-Speed Manual Transaxle - MMT6, 8-Speed Automatic Transmission 8F57, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Front-Wheel Drive (Right Hand Drive), Left Hand Drive, RHD 4WD (FTD)
    2011-2019 Ford Explorer6 Cyl 3.5L Cyclone Petrol TIVCT, 6 Cyl 3.7L DOHC6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
    2011-2017 Ford F-1506 Cyl 3.5L Cyclone Petrol TIVCT, 6 Cyl 3.7L PFI NA10-Speed Automatic Transmission (10R80), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R70E W/TSS, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 5-Speed Manual Transmission - Mazda M5R2-C, 6-Speed Automatic Transmission (6R80), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
    2013-2019 Ford Flex6 Cyl 3.5L Cyclone Petrol TIVCT6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
    2011-2019 Ford Mustang6 Cyl 3.7L PFI NA10-Speed Automatic Transmission (10R80), 6-Speed Automatic Transmission (6R80), 6-Speed Manual Transmission (T56), 6-Speed Manual Transmission-3160, 6-Speed Manual Transmission-MT82, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
    2013-2019 Ford Taurus6 Cyl 3.5L Cyclone Petrol TIVCT, 6 Cyl 3.7L DOHC6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
    2015-2017 Ford Transit6 Cyl 3.7L PFI NA6-Speed Automatic Transmission (6R80)
    2017-2019 Lincoln Continental6 Cyl 3.7L DOHC6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
    2013-2016 Lincoln MKS6 Cyl 3.7L DOHC, 6 Cyl 3.7L PFI NA6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
    2013-2019 Lincoln MKT6 Cyl 3.7L DOHC, 6 Cyl 3.7L PFI NA6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
    View More
  • Customer Questions & Expert Answers

    Q:
    Will these fit my car and if not which part will? Thank you. Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if AT4Z-6250-B fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    How should oil clearance for each camshaft bearing be checked for the 2009 Ford Mustang? Posted by Customer
    A:
    Clean the bearing surfaces, lay the camshaft in place without lubrication, use Plastigage, and compare the width of the crushed Plastigage to the scale on the envelope.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done before removing the camshaft sprockets on the 2011 Ford Mustang? Posted by Customer
    A:
    Lock the camshaft in position using a special tool before loosening the camshaft sprocket bolt. It is also important to make identification marks on each sprocket to ensure correct reassembly.
    Posted by FordPartsGiant Specialist
    Q:
    What should be checked before installing the valve cover for the 2012 Lincoln MKX? Posted by Customer
    A:
    Check the valve clearances.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be considered before attempting to work on the timing system for the 2018 Lincoln MKX? Posted by Customer
    A:
    The timing system is complex. Severe engine damage will occur if you make any mistakes. Do not attempt this procedure unless you are highly experienced with this type of repair. If you are at all unsure of your abilities, consult an expert. Double-check all your work and be sure everything is correct before you attempt to start the engine.
    Posted by FordPartsGiant Specialist
    Q:
    How should the mating surfaces be prepared for the 2010 Ford Taurus? Posted by Customer
    A:
    Check that all mating surfaces are completely clean, unmarked, and free from oil.
    Posted by FordPartsGiant Specialist
    Q:
    How do you install the camshafts for the 2013 Ford Taurus? Posted by Customer
    A:
    63. At the front of each camshaft, there are two grooves to hold seals. Obtain new seals and install them in the camshaft grooves. The split where the ends of each seal come together must face UP (12 o'clock position) on the camshafts when they are installed. 64. Lubricate the camshaft bearing journals and cam lobes with moly-based grease or camshaft installation lubricant. 65. Position the camshafts in the cylinder head in their neutral positions. 66. Install the camshaft bearing caps (in their original locations), and tighten the bolts, in sequence, to the torque Specifications. 67. Recheck the valve clearances. 68. Remove the camshaft cap bolts that secure the valve train oil tubes. Remove the oil tubes. 69. Rotate the camshafts to position the dowel pins in their proper positions for installing the VCT units and secondary timing chains. Install the camshaft holding tools.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How should the cylinder head lifter bores and lifters be prepared for the 2017 Ford Edge? Posted by Customer
    A:
    Liberally oil the cylinder head lifter bores and the lifters.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How should the crankshaft be positioned for the 2017 Ford Edge? Posted by Customer
    A:
    Rotate it counterclockwise and position the keyway in the 9 o'clock position (neutral position).
    Posted by FordPartsGiant Specialist
    Q:
    What are the initial steps to prepare for the camshaft lobe lift check for the 2011 Ford F-150? Posted by Customer
    A:
    The initial steps include removing the valve covers and rocker arms while leaving the pushrods in place, and positioning the number one piston at TDC on the compression stroke.
    Posted by FordPartsGiant Specialist
    Q:
    What are the steps for installation for the 2007 Ford F-150? Posted by Customer
    A:
    26. If the lash adjusters or camshaft followers have been removed, install them in their original locations. 27. Apply moly-base grease or camshaft installation lube to the camshaft lobes and bearing journals, then install the camshaft(s). 28. Install the camshaft caps in the correct locations, loosely install all bolts, and align the camshaft sprockets before tightening. 29. Install the timing chain(s). 30. The remainder of installation is the reverse of removal.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be checked before removing the camshafts for the 2006 Ford F-150? Posted by Customer
    A:
    Before removing the camshafts, check the valve clearances.
    Posted by FordPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part AT4Z-6250-B, the Right Choice

To ensure reliability, purchase Ford part # AT4Z-6250-B Camshaft. It is sometimes referred to as Ford Camshaft. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Ford Explorer, F-150, Mustang models. It fits Lincoln Continental, MKS, MKX.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford AT4Z6250B Camshaft. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Ford parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly