Ford DG1Z-19703-A Compressor Assembly

You can Select Your Vehicle to check if DG1Z-19703-A fits your vehicle.

For V6 models, you should: Disconnect the electrical connector from the compressor clutch field coil. Disconnect the pressure transducer electrical connector, if equipped. Remove the refrigerant line mounting nuts. Disconnect the refrigerant inlet and outlet lines from the compressor, removing and discarding the old O-rings. On 2013 and later models, detach the wire harness from the air conditioning compressor and move it aside. On 2012 and earlier models, if the harness is held by a bracket, remove the mounting bracket bolt and move the harness aside. Remove the lower compressor mounting nut. Completely loosen the stud. Completely remove the air conditioning compressor mounting bolts. Remove the compressor from the vehicle.