Ford F4TZ-2140-F Cylinder Assembly - Master

You can Select Your Vehicle to check if F4TZ-2140-F fits your vehicle.

Start by disconnecting the cable from the negative battery terminal. If the vehicle has a power brake booster system, push the brake pedal down to expel the vacuum. For manual brakes, disconnect the wires from the brake light switch and remove the nut and shoulder bolt securing the master cylinder pushrod to the brake pedal. On later models, disconnect the fluid level indicator connector at the reservoir. Place newspapers or rags under the master cylinder to catch any leaking brake fluid. Use a suction device to remove as much brake fluid from the reservoir as possible. Unscrew the brake lines from the primary and secondary outlets of the master cylinder and plug the ends of the lines. Remove the fasteners securing the master cylinder to the firewall or power booster. Pull the master cylinder forward and lift it out of the vehicle, being careful not to let any fluid contact the paint.