Make sure this part fits

Ford 5L1Z-6049-AA Cylinder Head Assembly

2005-2008 Ford 5L1Z6049AA

Customer Questions & Expert Answers (11)
Ford 5L1Z-6049-AA Cylinder Head Assembly
  • Part Description
    Cylinder Head Assy
  • Position
    Passenger Side
  • Replaced By
    5R3Z-6049-A
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Manufacturer Part Number5L1Z-6049-AA, 5L1Z6049AA
    Part DescriptionCylinder Head Assy
    Manufacturer NoteIncludes Valves, Rockers, Tappets And Camshaft
    Item Dimensions26.1 x 14.5 x 13.1 inches
    Item Weight51.50 Pounds
    PositionPassenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKU5L1Z-6049-AA
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2005-2008 Ford Expedition8 Cyl 5.4L4AT 4R75W, 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 6-Speed Automatic Transmission (6R75), 6-Speed Automatic Transmission (6R80), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
    2005-2008 Ford F-250 Super Duty8 Cyl 5.4L5-Speed Automatic Transmission 5R110W - HI/Torque, 5-Speed Automatic Transmission 5R110W NAAO, 5-Speed Manual Transmission-Tremec TR4050, 6-Speed Manual Transmission M6HD-W, 6-Speed Manual Transmission Z/F S6-650, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
    2005-2008 Ford F-350 Super Duty8 Cyl 5.4L5-Speed Automatic Transmission 5R110W - HI/Torque, 5-Speed Automatic Transmission 5R110W NAAO, 5-Speed Manual Transmission-Tremec TR4050, 6-Speed Manual Transmission M6HD-W, 6-Speed Manual Transmission Z/F S6-650, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
    2005-2008 Ford F-450 Super Duty8 Cyl 5.4L5-Speed Automatic Transmission 5R110W - HI/Torque, 5-Speed Automatic Transmission 5R110W NAAO, 5-Speed Manual Transmission-Tremec TR4050, 6-Speed Manual Transmission M6HD-W, 6-Speed Manual Transmission Z/F S6-650, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
    2005-2008 Ford F-550 Super Duty8 Cyl 5.4L5-Speed Automatic Transmission 5R110W - HI/Torque, 5-Speed Automatic Transmission 5R110W NAAO, 5-Speed Manual Transmission-Tremec TR4050, 6-Speed Manual Transmission M6HD-W, 6-Speed Manual Transmission Z/F S6-650, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
    2005-2008 Lincoln Navigator8 Cyl 5.4L4-Speed Automatic Transmission E4OD(4R100), 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission ZF 6HP26 Steptronic, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
  • Customer Questions & Expert Answers

    Q:
    Will these fit my car and if not which part will? Thank you. Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 5L1Z-6049-AA fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    What is the first step in cylinder head disassembly for the 2002 Lincoln Navigator? Posted by Customer
    A:
    The first step involves the removal of the intake and exhaust valves and related components, including the rocker arm nuts, pivot balls, and rocker arms from the cylinder head studs.
    Posted by FordPartsGiant Specialist
    Q:
    What does the manufacturer recommend for the 2002 Lincoln Navigator regarding engine removal? Posted by Customer
    A:
    The manufacturer recommends that the engine be removed from the vehicle to perform the cylinder head removal procedure.
    Posted by FordPartsGiant Specialist
    Q:
    What should be inspected on the pushrods for the 2008 Lincoln Navigator? Posted by Customer
    A:
    Inspect the pushrod ends for scuffing and excessive wear, rolling each pushrod on a flat surface to check for bending.
    Posted by FordPartsGiant Specialist
    Q:
    What should be done before removing the cylinder heads for the 2002 Lincoln Navigator? Posted by Customer
    A:
    The engine must be completely cool to prevent cylinder head warpage.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What should be noted about the installation of seals on the 2004 Lincoln Navigator? Posted by Customer
    A:
    On V6 engines, the spring seat must be in place before installing the seal. On V8 engines, the seal and spring seat are one-piece. Ensure that replacement parts are the same as the ones removed earlier.
    Posted by FordPartsGiant Specialist
    Q:
    What specific steps are required for removing the left (driver's side) cylinder head for the 2006 Ford Expedition? Posted by Customer
    A:
    1. Unbolt the power steering reservoir and tie it aside in an upright position, leaving the hoses connected. 2. Remove the drivebelts. 3. Remove the air-conditioning compressor/power steering pump bracket from the head without disconnecting the hoses.
    Posted by FordPartsGiant Specialist
    Q:
    What should be done if the cylinder heads are being installed with the camshafts in place for the 2001 Ford Expedition? Posted by Customer
    A:
    Make sure the camshafts are back in their original TDC positions before placing the cylinder heads on the engine block.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    How should the first valve be installed for the 2005 Ford Expedition? Posted by Customer
    A:
    Beginning at one end of the head, lubricate and install the first valve. Apply moly-base grease or clean engine oil to the valve stem.
    Posted by FordPartsGiant Specialist
    Q:
    How should parts be stored during disassembly for the 2000 Ford Expedition? Posted by Customer
    A:
    Parts should be labeled or stored separately, such as in a small plastic bag with an appropriate label, to keep the valve train components together for reinstallation in their original positions.
    Posted by FordPartsGiant Specialist
    Q:
    What is the procedure for cleaning the cylinder head for the 2006 Ford Expedition? Posted by Customer
    A:
    Clean the cylinder head with solvent and dry it thoroughly. Compressed air can speed up the drying process and ensure that all holes and recessed areas are clean.
    Posted by FordPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part 5L1Z-6049-AA, the Right Choice

To ensure reliability, purchase Ford part # 5L1Z-6049-AA Cylinder Head Assembly. It is sometimes referred to as Ford Cylinder Head. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Ford Expedition, F-350 Super Duty, F-550 Super Duty models. It fits Lincoln Navigator.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford 5L1Z6049AA Cylinder Head Assembly. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Ford parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly