Make sure this part fits

Ford 5L8Z-8C607-BF Fan And Motor Assembly

2005 Ford 5L8Z8C607BF

Customer Questions & Expert Answers (3)
Ford 5L8Z-8C607-BF Fan And Motor Assembly
  • Part Description
    Fan And Motor Assembly
  • Base No.
    8C607
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.8C607
    Manufacturer Part Number5L8Z-8C607-BF, 5L8Z8C607BF
    Part DescriptionFan And Motor Assembly
    Other NamesFan & Motor, Fan Assembly
    Item Dimensions25.2 x 6.1 x 37.4 inches
    Item Weight16.40 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKU5L8Z-8C607-BF
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2005 Ford Escape4 Cyl 2.3L4AT CD4E, 5-Speed Manual Transmission, 5-Speed Manual Transmission - AK, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Right Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive), Two-Wheel Drive (Right Hand Drive)
    2005 Mercury Mariner4 Cyl 2.3L4AT CD4E, 5-Speed Manual Transmission, 5-Speed Manual Transmission - AK, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Right Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive), Two-Wheel Drive (Right Hand Drive)
  • Customer Questions & Expert Answers

    Q:
    Will these fit my car and if not which part will? Thank you. Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 5L8Z-8C607-BF fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    How do I remove the radiator fan and motor for replacement for the 2003 Ford Escape? Posted by Customer
    A:
    To remove the radiator fan and motor, follow these steps:1. Disconnect the cable from the negative battery terminal.2. Disconnect the fan motor electrical connector(s).3. Raise the vehicle and secure it on jackstands.4. Drain the cooling system, saving the coolant if it's relatively new and still in good condition.5. Remove the hood latch and the upper radiator hose.6. Loosen the hose clamp and remove the upper radiator hose. If the hose is stuck, use adjustable pliers to twist and break the seal before pulling it off. Consider installing a new hose if it's old or deteriorated.7. Remove the center support bolts and lift the center support from the engine compartment.8. Remove the left and right upper radiator support brackets to tilt the radiator forward for additional clearance.9. Detach the wire harness from the fan shroud, and remove the upper and lower fan shroud mounting bolts.10. Carefully lift the fan motor and shroud out of the engine compartment as a single assembly.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Engine Cooling Fan
    Q:
    What steps are involved in removing the cooling fans while working on the front bumper cover and airbag sensors for the 2006 Mercury Mariner? Posted by Customer
    A:
    To remove the cooling fans when working on the front bumper cover and airbag sensors, follow these steps: 1. Raise the vehicle and support it securely on jackstands. 2. Drain the engine coolant. 3. Remove the front bumper cover. 4. Remove both airbag sensors, ensuring you disarm the airbag system before working in the area of the cooling fans. 5. Remove the brackets from the top of the radiator and the nut and bolts from the hood latch, keeping the cable attached to the latch. 6. Detach the wiring harness clips from the radiator and remove the bolt from the vertical center brace in front of the radiator. 7. On four-cylinder models, disconnect the wiring from the fan resistor, and also disconnect the coolant recovery hose and push it aside. 8. Disconnect the wiring from the cooling fans. 9. Remove the two cooling fan mounting bolts and carefully lift the fan assembly out of the engine compartment. 10. Installation is the reverse of removal.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Engine Cooling Fan
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part 5L8Z-8C607-BF, the Right Choice

To ensure reliability, purchase Ford part # 5L8Z-8C607-BF Fan And Motor Assembly. It is sometimes referred to as Ford Fan Motor, Ford Cooling Fan Assembly, Ford Engine Cooling Fan. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Ford Escape models. It fits Mercury Mariner.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford 5L8Z8C607BF Fan And Motor Assembly. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Ford parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly