Make sure this part fits

Ford F1TZ-6375-BA Flywheel Assembly

1990-1996 Ford F1TZ6375BA

Customer Questions & Expert Answers (9)
Ford F1TZ-6375-BA Flywheel Assembly
  • Part Description
    Flywheel Assy
  • Base No.
    6375
  • Replaces
    F1TZ-6375-A
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.6375
    Manufacturer Part NumberF1TZ-6375-BA, F1TZ6375BA
    Part DescriptionFlywheel Assy
    Other NamesDrive Plate, Flywheel
    Item Dimensions11.1 x 9.4 x 2.4 inches
    Item Weight6.10 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ReplacesF1TZ-6375-A
    ManufacturerFord
    SKUF1TZ-6375-BA
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1990-1996 Ford Aerostar6 Cyl 4.0L4AT 4R44E, 4AT 4R55E, 4AT A4LD, 5MT
    1990 Ford Bronco II6 Cyl 2.9L5MT
    1991-1996 Ford Explorer6 Cyl 4.0L4AT 4R44E, 4AT 4R55E, 4AT 4R70W, 4AT A4LD, 4AT AODE-E, 4AT AODE-W, 5MT
    1990-1996 Ford Ranger6 Cyl 2.9L, 6 Cyl 4.0L4AT 4R44E, 4AT 4R55E, 4AT A4LD, 5MT
  • Customer Questions & Expert Answers

    Q:
    Is the the correct part for the attached VIN? Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if F1TZ-6375-BA fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    How can you ensure correct alignment during reinstallation for the 1994 Ford Ranger? Posted by Customer
    A:
    Use a center punch or paint to make alignment marks on the flywheel/driveplate and crankshaft.
    Posted by FordPartsGiant Specialist
    Q:
    How do you prevent the flywheel/driveplate from turning while tightening the bolts for the 2005 Ford Ranger? Posted by Customer
    A:
    Wedge a screwdriver through the starter motor opening to keep the flywheel/driveplate from turning as you tighten the bolts in a crisscross pattern, to the torque.
    Posted by FordPartsGiant Specialist
    Q:
    What should be done if the rear oil seal shows signs of leakage or the 1994 Ford Ranger has high mileage? Posted by Customer
    A:
    Replacing the seal is highly recommended before re-installing the flywheel/driveplate.
    Posted by FordPartsGiant Specialist
    Q:
    What should be checked for after removing the flywheel for the 2000 Ford Ranger? Posted by Customer
    A:
    Check for cracks and other damage.
    Posted by FordPartsGiant Specialist
    Q:
    How should the ring gear be removed from the flywheel for the 1989 Ford Bronco II? Posted by Customer
    A:
    Heat the ring gear with a blow torch on the engine side of the gear, and knock it off the flywheel. Do not hit the flywheel when removing the ring gear.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Flywheel
    Q:
    When should the flywheel be inspected for the 1998 Ford Explorer? Posted by Customer
    A:
    The flywheel should be inspected when the vehicle suffers from excessive transmission gear wear, transmission jumping out of gear, driveline vibration, clutch pedal vibration, clutch slippage, pilot bearing noise, or release bearing noise.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Flywheel
    Q:
    What should you do if you are reusing the original flywheel bolts for the 1996 Ford Explorer? Posted by Customer
    A:
    If you are reusing the original flywheel bolts, you should clean the bolt threads and the crankshaft bolt holes and apply Teflon thread sealant to the bolt threads.
    Posted by FordPartsGiant Specialist
    Q:
    What should be done on manual transmission equipped 2000 Ford Explorer? Posted by Customer
    A:
    Remove the pressure plate and clutch disc.
    Posted by FordPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part F1TZ-6375-BA, the Right Choice

To ensure reliability, purchase Ford part # F1TZ-6375-BA Flywheel Assembly. It is sometimes referred to as Ford Flywheel. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Ford Aerostar, Explorer, Ranger models.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford F1TZ6375BA Flywheel Assembly. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Ford parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly