Make sure this part fits

Ford 7T4Z-7822600-BA Handle Assy - Door - Inner

2007-2015 Ford 7T4Z7822600BA

Customer Questions & Expert Answers (3)
Ford 7T4Z-7822600-BA Handle Assy - Door - Inner
  • Part Description
    Handle Assy - Door - Inner
  • Base No.
    <22600
  • Position
    Passenger Side
  • Manufacturer
    Ford
Make sure this part fits
$33.97 MSRP: $49.67
You Save: $15.70 (32%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.<22600
    Manufacturer Part Number7T4Z-7822600-BA, 7T4Z7822600BA
    Part DescriptionHandle Assy - Door - Inner
    Other NamesInside Handle
    Manufacturer NoteChrome
    Item Weight0.70 Pounds
    PositionPassenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKU7T4Z-7822600-BA
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2007-2014 Ford Edge4 Cyl 2.0L EcoBoost (240PS) , 6 Cyl 3.5L DOHC VCT SMPI, 6 Cyl 3.7L DOHC6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
    2007-2015 Lincoln MKX4 Cyl 2.0L EcoBoost (240PS) , 6 Cyl 3.5L DOHC VCT SMPI, 6 Cyl 3.7L DOHC6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
  • Customer Questions & Expert Answers

    Q:
    Does the PN fit my vehicle? Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 7T4Z-7822600-BA fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    How to replace the Door Handle,Door Latch and Door Lock Cylinder on Lincoln MKX? Posted by Customer
    A:
    To replace the outside door handle lever, begin by removing the trim cap for the outside handle retaining screw and loosening the screw without removing it. Next, take off the cover from the outside handle and pull the handle out and to the rear to disengage it from the handle reinforcement inside the door. Inspect the outside door handle seals and replace them if they are cracked or deteriorated. For the inside door handle, remove the door trim panel, disengage the handle from the regulator module, and disconnect the actuator by prying out the bushing, aligning the cable with the slot in the handle lever to pull out the cable end plug. For the outside door handle reinforcement, first remove the outside door handle lever, then the door trim panel and the power window regulator. Disengage the upper and lower actuating rods, disconnect the keyless entry pad harness retaining clip, and remove the handle reinforcement. When dealing with the door lock cylinder, note that a new cylinder cannot be simply installed; instead, discard the old one and build a new unit using a lock repair package from the dealer. Remove the outside door handle, disengage the release tab, and install the rebuilt lock cylinder by aligning the D-slot. For the liftgate latch, remove the trim panel, disconnect the electrical connector, and remove the latch bolts. The installation process is the reverse of removal, followed by de-initialization/initialization procedures. For power release switch models, remove the liftgate trim panel, disconnect the electrical connector, and remove the switch molding screws to take out the switch. For manual release switch models, remove the trim panel, disconnect the electrical connector, and remove the switch molding nuts before taking out the switch. For the keyless entry pad on 2014 and earlier models, remove the upper trim cap, release the clip holding the keypad, and disconnect the electrical connector. For 2015 and later models, the keyless entry pad is integrated into the door upper trim panel; remove the exterior mirror, lower the window, and take off the door panel and moulding fasteners. Disconnect the key pad entry electrical connector and remove the door upper trim panel fasteners, pulling the harness out through the window opening. The installation process is the reverse of removal for all components.
    Posted by FordPartsGiant Specialist
    Q:
    How to replace the Door Handle,Door Latch and Door Lock Cylinder on Ford Edge? Posted by Customer
    A:
    To replace the outside door handle lever, begin by removing the trim cap for the outside handle retaining screw and loosening the screw without removing it. Next, take off the cover from the outside handle and pull the handle out and to the rear to disengage it from the handle reinforcement inside the door. Inspect the outside door handle seals and replace them if they are cracked or deteriorated. For the inside door handle, remove the door trim panel, disengage the handle from the regulator module, and disconnect the actuator by prying out the bushing, aligning the cable with the slot in the handle lever to pull out the cable end plug. For the outside door handle reinforcement, first remove the outside door handle lever, then the door trim panel and the power window regulator. Disengage the upper and lower actuating rods, disconnect the keyless entry pad harness retaining clip, and remove the handle reinforcement. When dealing with the door lock cylinder, note that a new cylinder cannot be simply installed; instead, discard the old one and build a new unit using a lock repair package from the dealer. Remove the outside door handle, disengage the release tab, and install the rebuilt lock cylinder by aligning the D-slot. For the liftgate latch, remove the trim panel, disconnect the electrical connector, and remove the latch bolts. The installation process is the reverse of removal, followed by de-initialization/initialization procedures. For power release switch models, remove the liftgate trim panel, disconnect the electrical connector, and remove the switch molding screws to take out the switch. For manual release switch models, remove the trim panel, disconnect the electrical connector, and remove the switch molding nuts before taking out the switch. For the keyless entry pad on 2014 and earlier models, remove the upper trim cap, release the clip holding the keypad, and disconnect the electrical connector. For 2015 and later models, the keyless entry pad is integrated into the door upper trim panel; remove the exterior mirror, lower the window, and take off the door panel and moulding fasteners. Disconnect the key pad entry electrical connector and remove the door upper trim panel fasteners, pulling the harness out through the window opening. The installation process is the reverse of removal for all components.
    Posted by FordPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part 7T4Z-7822600-BA, the Right Choice

To ensure reliability, purchase Ford part # 7T4Z-7822600-BA Handle Assy - Door - Inner. It is sometimes referred to as Ford Door Handle. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Ford Edge models. It fits Lincoln MKX.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford 7T4Z7822600BA Handle Assy - Door - Inner. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Ford parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly