Ford AL5Z-2282-A Rear Brake Hose Assembly

You can Select Your Vehicle to check if AL5Z-2282-A fits your vehicle.

1. If it hasn't already been done, raise the vehicle and support it securely on jackstands. Remove the front wheels. 2. The disc brake calipers, which contain the pads, are now visible. Each caliper has an outer and an inner pad - all pads should be checked. 3. Note the pad thickness by looking through the inspection hole in the caliper. If the lining material is 1/8-inch thick or less, or if it is tapered from end-to-end, the pads should be replaced. 4. Check the condition of the brake disc. Look for score marks, deep scratches, and overheated areas (they will appear blue or discolored). If damage or wear is noted, the disc can be removed and resurfaced by an automotive machine shop or replaced with a new one. 5. Remove the calipers without disconnecting the brake hoses. Lubricate the caliper slide rails and the inner pad slots on the steering knuckles with special caliper slide grease.

Use new sealing washers and tighten the banjo bolt to the specified torque.

Remove the large retaining clip and detach the hose from the bracket and the body.